nrf_bprot.h 4.8 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134
  1. /**
  2. * Copyright (c) 2019, Nordic Semiconductor ASA
  3. *
  4. * All rights reserved.
  5. *
  6. * Redistribution and use in source and binary forms, with or without modification,
  7. * are permitted provided that the following conditions are met:
  8. *
  9. * 1. Redistributions of source code must retain the above copyright notice, this
  10. * list of conditions and the following disclaimer.
  11. *
  12. * 2. Redistributions in binary form, except as embedded into a Nordic
  13. * Semiconductor ASA integrated circuit in a product or a software update for
  14. * such product, must reproduce the above copyright notice, this list of
  15. * conditions and the following disclaimer in the documentation and/or other
  16. * materials provided with the distribution.
  17. *
  18. * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
  19. * contributors may be used to endorse or promote products derived from this
  20. * software without specific prior written permission.
  21. *
  22. * 4. This software, with or without modification, must only be used with a
  23. * Nordic Semiconductor ASA integrated circuit.
  24. *
  25. * 5. Any software provided in binary form under this license must not be reverse
  26. * engineered, decompiled, modified and/or disassembled.
  27. *
  28. * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
  29. * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  30. * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
  31. * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
  32. * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  33. * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
  34. * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  35. * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  36. * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
  37. * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  38. *
  39. */
  40. #ifndef NRF_BPROT_H__
  41. #define NRF_BPROT_H__
  42. #include <nrfx.h>
  43. #ifdef __cplusplus
  44. extern "C" {
  45. #endif
  46. /**
  47. * @defgroup nrf_bprot_hal BPROT HAL
  48. * @{
  49. * @ingroup nrf_bprot
  50. * @brief Hardware access layer for managing the Block Protection (BPROT) mechanism.
  51. */
  52. /**
  53. * @brief Function for enabling protection for specified non-volatile memory blocks.
  54. *
  55. * Blocks are arranged into groups of 32 blocks each. Each block size is 4 kB.
  56. * Any attempt to write or erase a protected block will result in hard fault.
  57. * The memory block protection can be disabled only by resetting the device.
  58. *
  59. * @param[in] p_reg Pointer to the structure of registers of the peripheral.
  60. * @param[in] group_idx Non-volatile memory group containing memory blocks to protect.
  61. * @param[in] block_mask Non-volatile memory blocks to protect. Each bit in bitmask represents
  62. * one memory block in the specified group.
  63. */
  64. __STATIC_INLINE void nrf_bprot_nvm_blocks_protection_enable(NRF_BPROT_Type * p_reg,
  65. uint8_t group_idx,
  66. uint32_t block_mask);
  67. /**
  68. * @brief Function for setting the non-volatile memory (NVM) protection during debug.
  69. *
  70. * NVM protection is disabled by default while debugging.
  71. *
  72. * @param[in] p_reg Pointer to the structure of registers of the peripheral.
  73. * @param[in] enable True if NVM protection during debug is to be enabled.
  74. * False if otherwise.
  75. */
  76. __STATIC_INLINE void nrf_bprot_nvm_protection_in_debug_set(NRF_BPROT_Type * p_reg,
  77. bool enable);
  78. #ifndef SUPPRESS_INLINE_IMPLEMENTATION
  79. __STATIC_INLINE void nrf_bprot_nvm_blocks_protection_enable(NRF_BPROT_Type * p_reg,
  80. uint8_t group_idx,
  81. uint32_t block_mask)
  82. {
  83. switch (group_idx)
  84. {
  85. case 0:
  86. p_reg->CONFIG0 = block_mask;
  87. break;
  88. case 1:
  89. p_reg->CONFIG1 = block_mask;
  90. break;
  91. #if defined(BPROT_CONFIG2_REGION64_Pos)
  92. case 2:
  93. p_reg->CONFIG2 = block_mask;
  94. break;
  95. #endif
  96. #if defined(BPROT_CONFIG3_REGION96_Pos)
  97. case 3:
  98. p_reg->CONFIG3 = block_mask;
  99. break;
  100. #endif
  101. default:
  102. NRFX_ASSERT(false);
  103. break;
  104. }
  105. }
  106. __STATIC_INLINE void nrf_bprot_nvm_protection_in_debug_set(NRF_BPROT_Type * p_reg,
  107. bool enable)
  108. {
  109. p_reg->DISABLEINDEBUG =
  110. (enable ? 0 : BPROT_DISABLEINDEBUG_DISABLEINDEBUG_Msk);
  111. }
  112. #endif // SUPPRESS_INLINE_IMPLEMENTATION
  113. /** @} */
  114. #ifdef __cplusplus
  115. }
  116. #endif
  117. #endif // NRF_BPROT_H__