123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151 |
- /**
- * Copyright (c) 2018, Nordic Semiconductor ASA
- *
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice, this
- * list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form, except as embedded into a Nordic
- * Semiconductor ASA integrated circuit in a product or a software update for
- * such product, must reproduce the above copyright notice, this list of
- * conditions and the following disclaimer in the documentation and/or other
- * materials provided with the distribution.
- *
- * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
- * contributors may be used to endorse or promote products derived from this
- * software without specific prior written permission.
- *
- * 4. This software, with or without modification, must only be used with a
- * Nordic Semiconductor ASA integrated circuit.
- *
- * 5. Any software provided in binary form under this license must not be reverse
- * engineered, decompiled, modified and/or disassembled.
- *
- * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
- * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
- * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
- /**
- * @file peer_manager_handler.h
- *
- * @defgroup pm_handler Peer Manager Standard Event Handlers
- * @ingroup peer_manager
- * @{
- * @brief Standard event handlers implementing some best practices for BLE security.
- */
- #ifndef PEER_MANAGER_HANDLER_H__
- #define PEER_MANAGER_HANDLER_H__
- #include "ble.h"
- #include "peer_manager.h"
- #ifdef __cplusplus
- extern "C" {
- #endif
- /**@brief Standard function for making Peer Manager calls based on Peer Manager events.
- *
- * This function does the following:
- * - Logs all PM events using @ref nrf_log, at different severity levels.
- * - Starts encryption if connected to an already bonded peer. This is affected by @ref
- * PM_HANDLER_SEC_DELAY_MS.
- * - Calls @ref app_error on fatal errors.
- *
- * @note In normal circumstances, this function should be called for every Peer Manager event.
- *
- * @param[in] p_pm_evt Peer Manager event to handle.
- */
- void pm_handler_on_pm_evt(pm_evt_t const * p_pm_evt);
- /**@brief Auxiliary standard function for logging Peer Manager events.
- *
- * This function logs all PM events using @ref nrf_log, at different severity levels. The
- * @ref PM_LOG_ENABLED and other @c PM_LOG_* configs control these log messages.
- *
- * @note This function is called internally by @ref pm_handler_on_pm_evt.
- *
- * @param[in] p_pm_evt Peer Manager event to log.
- */
- void pm_handler_pm_evt_log(pm_evt_t const * p_pm_evt);
- /**@brief Auxiliary standard function for maintaining room in flash based on Peer Manager events.
- *
- * This function does the following:
- * - Ranks peers by when they last connected.
- * - Garbage collects the flash when needed.
- * - Deletes the lowest ranked peer(s) when garbage collection is insufficient.
- *
- * @note See also @ref pm_handler_flash_clean_on_return.
- * @note In normal circumstances, this function should be called for every Peer Manager event.
- * @note This function is a supplement to, not a replacement for @ref pm_handler_on_pm_evt.
- *
- * @param[in] p_pm_evt Peer Manager event to handle.
- */
- void pm_handler_flash_clean(pm_evt_t const * p_pm_evt);
- /**@brief Function to call when a Peer Manager function returns @ref NRF_ERROR_STORAGE_FULL.
- *
- * @note This should only be used if @ref pm_handler_flash_clean is also used.
- */
- void pm_handler_flash_clean_on_return(void);
- /**@brief Auxiliary standard function for disconnecting when the connection could not be secured.
- *
- * This function disconnects whenever connection security fails, i.e. whenever it receives a
- * @ref PM_EVT_CONN_SEC_FAILED.
- *
- * @note In normal circumstances, this function should be called for every Peer Manager event.
- * @note This function is a supplement to, not a replacement for @ref pm_handler_on_pm_evt.
- *
- * @param[in] p_pm_evt Peer Manager event to handle.
- */
- void pm_handler_disconnect_on_sec_failure(pm_evt_t const * p_pm_evt);
- /**@brief Function for securing a connection when it is established.
- *
- * This function starts security when receiving a @ref BLE_GAP_EVT_CONNECTED event. This is
- * affected by @ref PM_HANDLER_SEC_DELAY_MS.
- *
- * @note In normal circumstances, this function should be called for every BLE event.
- *
- * @param[in] p_ble_evt BLE event to handle.
- */
- void pm_handler_secure_on_connection(ble_evt_t const * p_ble_evt);
- /**@brief Function for securing a connection if a GATT read or write operation lacks security.
- *
- * This function starts pairing if a GATTC procedure fails with insufficient encryption
- * or insufficient authentication. This is meant to delay performing pairing/bonding until
- * it is actually needed to access resources. This is affected by @ref PM_HANDLER_SEC_DELAY_MS.
- *
- * @note When using this handler, the failed GATTC operation must be retried by the user.
- * @note This does not work when using Write Without Response (@ref BLE_GATT_OP_WRITE_CMD) because
- * the server does not send any response, even on error. Instead, the write will be
- * silently dropped by the server.
- * @note In normal circumstances, this function should be called for every BLE event.
- *
- * @param[in] p_ble_evt BLE event to handle.
- */
- void pm_handler_secure_on_error(ble_evt_t const * p_ble_evt);
- #ifdef __cplusplus
- }
- #endif
- /** @}*/
- #endif // PEER_MANAGER_HANDLER_H__
|