owner-nrf52sdk/nRF5_SDK_15.2.0/modules/nrfx/mdk/nrf52810.svd

<?xml version="1.0" encoding="utf-8"?>
<!-- File naming: <vendor>_<part/series name>_svd.xml -->
<device schemaVersion="1.1" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" noNamespaceSchemaLocation="CMSIS-SVD.xsd">
  <vendor>Nordic Semiconductor</vendor>
  <vendorID>Nordic</vendorID>
  <name>nrf52810</name>
  <series>nrf52</series>
  <version>1</version>
  <description>nRF52810 reference description for radio MCU with ARM 32-bit Cortex-M4 Microcontroller </description>
  <licenseText>
Copyright (c) 2010 - 2018, Nordic Semiconductor ASA\n
\n
All rights reserved.\n
\n
Redistribution and use in source and binary forms, with or without modification,\n
are permitted provided that the following conditions are met:\n
\n
1. Redistributions of source code must retain the above copyright notice, this\n
   list of conditions and the following disclaimer.\n
\n
2. Redistributions in binary form, except as embedded into a Nordic\n
   Semiconductor ASA integrated circuit in a product or a software update for\n
   such product, must reproduce the above copyright notice, this list of\n
   conditions and the following disclaimer in the documentation and/or other\n
   materials provided with the distribution.\n
\n
3. Neither the name of Nordic Semiconductor ASA nor the names of its\n
   contributors may be used to endorse or promote products derived from this\n
   software without specific prior written permission.\n
\n
4. This software, with or without modification, must only be used with a\n
   Nordic Semiconductor ASA integrated circuit.\n
\n
5. Any software provided in binary form under this license must not be reverse\n
   engineered, decompiled, modified and/or disassembled.\n
\n
THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS\n
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES\n
OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE\n
DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE\n
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR\n
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE\n
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)\n
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT\n
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT\n
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.\n
        </licenseText>
  <addressUnitBits>8</addressUnitBits>
  <width>32</width>
  <size>32</size>
  <resetValue>0x00000000</resetValue>
  <resetMask>0xFFFFFFFF</resetMask>
  <cpu>
    <name>CM4</name>
    <revision>r0p1</revision>
    <endian>little</endian>
    <mpuPresent>1</mpuPresent>
    <fpuPresent>0</fpuPresent>
    <nvicPrioBits>3</nvicPrioBits>
    <vendorSystickConfig>0</vendorSystickConfig>
  </cpu>
  <headerSystemFilename>system_nrf52810</headerSystemFilename>
  <headerDefinitionsPrefix>NRF_</headerDefinitionsPrefix>
  <vendorExtensions>
    <ExampleStackSize>2048</ExampleStackSize>
    <ExampleHeapSize>2048</ExampleHeapSize>
    <MaxInterrupts>112</MaxInterrupts>
  </vendorExtensions>
  <peripherals>
    <peripheral>
      <name>FICR</name>
      <description>Factory information configuration registers</description>
      <baseAddress>0x10000000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <groupName>FICR</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>CODEPAGESIZE</name>
          <description>Code memory page size</description>
          <addressOffset>0x010</addressOffset>
          <access>read-only</access>
          <resetValue>0x00001000</resetValue>
          <fields>
            <field>
              <name>CODEPAGESIZE</name>
              <description>Code memory page size</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>CODESIZE</name>
          <description>Code memory size</description>
          <addressOffset>0x014</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000030</resetValue>
          <fields>
            <field>
              <name>CODESIZE</name>
              <description>Code memory size in number of pages</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>0x2</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>DEVICEID[%s]</name>
          <description>Description collection[n]: Device identifier</description>
          <addressOffset>0x060</addressOffset>
          <access>read-only</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>DEVICEID</name>
              <description>64 bit unique device identifier</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>0x4</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>ER[%s]</name>
          <description>Description collection[n]: Encryption root, word n</description>
          <addressOffset>0x080</addressOffset>
          <access>read-only</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>ER</name>
              <description>Encryption root, word n</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>0x4</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>IR[%s]</name>
          <description>Description collection[n]: Identity root, word n</description>
          <addressOffset>0x090</addressOffset>
          <access>read-only</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>IR</name>
              <description>Identity root, word n</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVICEADDRTYPE</name>
          <description>Device address type</description>
          <addressOffset>0x0A0</addressOffset>
          <access>read-only</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>DEVICEADDRTYPE</name>
              <description>Device address type</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Public</name>
                  <description>Public address</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Random</name>
                  <description>Random address</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <dim>0x2</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>DEVICEADDR[%s]</name>
          <description>Description collection[n]: Device address n</description>
          <addressOffset>0x0A4</addressOffset>
          <access>read-only</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>DEVICEADDR</name>
              <description>48 bit device address</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <cluster>
          <name>INFO</name>
          <description>Device info</description>
          <headerStructName>FICR_INFO</headerStructName>
          <addressOffset>0x100</addressOffset>
          <register>
            <name>PART</name>
            <description>Part code</description>
            <addressOffset>0x000</addressOffset>
            <access>read-only</access>
            <resetValue>0x00052810</resetValue>
            <fields>
              <field>
                <name>PART</name>
                <description>Part code</description>
                <lsb>0</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>N52810</name>
                    <description>nRF52810</description>
                    <value>0x52810</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Unspecified</name>
                    <description>Unspecified</description>
                    <value>0xFFFFFFFF</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>VARIANT</name>
            <description>Part variant, hardware version and production configuration</description>
            <addressOffset>0x004</addressOffset>
            <access>read-only</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>VARIANT</name>
                <description>Part variant, hardware version and production configuration, encoded as ASCII</description>
                <lsb>0</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>AAAA</name>
                    <description>AAAA</description>
                    <value>0x41414141</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AAA0</name>
                    <description>AAA0</description>
                    <value>0x41414130</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AABA</name>
                    <description>AABA</description>
                    <value>0x41414241</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AABB</name>
                    <description>AABB</description>
                    <value>0x41414242</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AAB0</name>
                    <description>AAB0</description>
                    <value>0x41414230</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AACA</name>
                    <description>AACA</description>
                    <value>0x41414341</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AACB</name>
                    <description>AACB</description>
                    <value>0x41414342</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AAC0</name>
                    <description>AAC0</description>
                    <value>0x41414330</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Unspecified</name>
                    <description>Unspecified</description>
                    <value>0xFFFFFFFF</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>PACKAGE</name>
            <description>Package option</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PACKAGE</name>
                <description>Package option</description>
                <lsb>0</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>QF</name>
                    <description>QFxx - 48-pin QFN</description>
                    <value>0x2000</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>QC</name>
                    <description>QCxx - 32-pin QFN</description>
                    <value>0x2003</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Unspecified</name>
                    <description>Unspecified</description>
                    <value>0xFFFFFFFF</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>RAM</name>
            <description>RAM variant</description>
            <addressOffset>0x00C</addressOffset>
            <access>read-only</access>
            <resetValue>0x00000018</resetValue>
            <fields>
              <field>
                <name>RAM</name>
                <description>RAM variant</description>
                <lsb>0</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>K24</name>
                    <description>24 kByte RAM</description>
                    <value>0x18</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Unspecified</name>
                    <description>Unspecified</description>
                    <value>0xFFFFFFFF</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>FLASH</name>
            <description>Flash variant</description>
            <addressOffset>0x010</addressOffset>
            <access>read-only</access>
            <resetValue>0x000000C0</resetValue>
            <fields>
              <field>
                <name>FLASH</name>
                <description>Flash variant</description>
                <lsb>0</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>K192</name>
                    <description>192 kByte flash</description>
                    <value>0xC0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Unspecified</name>
                    <description>Unspecified</description>
                    <value>0xFFFFFFFF</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <dim>0x3</dim>
            <dimIncrement>0x4</dimIncrement>
            <name>UNUSED8[%s]</name>
            <description>Unspecified</description>
            <addressOffset>0x014</addressOffset>
            <access>read-write</access>
          </register>
        </cluster>
        <cluster>
          <name>TEMP</name>
          <description>Registers storing factory TEMP module linearization coefficients</description>
          <headerStructName>FICR_TEMP</headerStructName>
          <addressOffset>0x404</addressOffset>
          <register>
            <name>A0</name>
            <description>Slope definition A0</description>
            <addressOffset>0x000</addressOffset>
            <access>read-only</access>
            <resetValue>0x00000320</resetValue>
            <fields>
              <field>
                <name>A</name>
                <description>A (slope definition) register</description>
                <lsb>0</lsb>
                <msb>11</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>A1</name>
            <description>Slope definition A1</description>
            <addressOffset>0x004</addressOffset>
            <access>read-only</access>
            <resetValue>0x00000343</resetValue>
            <fields>
              <field>
                <name>A</name>
                <description>A (slope definition) register</description>
                <lsb>0</lsb>
                <msb>11</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>A2</name>
            <description>Slope definition A2</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <resetValue>0x0000035D</resetValue>
            <fields>
              <field>
                <name>A</name>
                <description>A (slope definition) register</description>
                <lsb>0</lsb>
                <msb>11</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>A3</name>
            <description>Slope definition A3</description>
            <addressOffset>0x00C</addressOffset>
            <access>read-only</access>
            <resetValue>0x00000400</resetValue>
            <fields>
              <field>
                <name>A</name>
                <description>A (slope definition) register</description>
                <lsb>0</lsb>
                <msb>11</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>A4</name>
            <description>Slope definition A4</description>
            <addressOffset>0x010</addressOffset>
            <access>read-only</access>
            <resetValue>0x00000452</resetValue>
            <fields>
              <field>
                <name>A</name>
                <description>A (slope definition) register</description>
                <lsb>0</lsb>
                <msb>11</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>A5</name>
            <description>Slope definition A5</description>
            <addressOffset>0x014</addressOffset>
            <access>read-only</access>
            <resetValue>0x0000037B</resetValue>
            <fields>
              <field>
                <name>A</name>
                <description>A (slope definition) register</description>
                <lsb>0</lsb>
                <msb>11</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>B0</name>
            <description>Y-intercept B0</description>
            <addressOffset>0x018</addressOffset>
            <access>read-only</access>
            <resetValue>0x00003FCC</resetValue>
            <fields>
              <field>
                <name>B</name>
                <description>B (y-intercept)</description>
                <lsb>0</lsb>
                <msb>13</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>B1</name>
            <description>Y-intercept B1</description>
            <addressOffset>0x01C</addressOffset>
            <access>read-only</access>
            <resetValue>0x00003F98</resetValue>
            <fields>
              <field>
                <name>B</name>
                <description>B (y-intercept)</description>
                <lsb>0</lsb>
                <msb>13</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>B2</name>
            <description>Y-intercept B2</description>
            <addressOffset>0x020</addressOffset>
            <access>read-only</access>
            <resetValue>0x00003F98</resetValue>
            <fields>
              <field>
                <name>B</name>
                <description>B (y-intercept)</description>
                <lsb>0</lsb>
                <msb>13</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>B3</name>
            <description>Y-intercept B3</description>
            <addressOffset>0x024</addressOffset>
            <access>read-only</access>
            <resetValue>0x00000012</resetValue>
            <fields>
              <field>
                <name>B</name>
                <description>B (y-intercept)</description>
                <lsb>0</lsb>
                <msb>13</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>B4</name>
            <description>Y-intercept B4</description>
            <addressOffset>0x028</addressOffset>
            <access>read-only</access>
            <resetValue>0x0000004D</resetValue>
            <fields>
              <field>
                <name>B</name>
                <description>B (y-intercept)</description>
                <lsb>0</lsb>
                <msb>13</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>B5</name>
            <description>Y-intercept B5</description>
            <addressOffset>0x02C</addressOffset>
            <access>read-only</access>
            <resetValue>0x00003E10</resetValue>
            <fields>
              <field>
                <name>B</name>
                <description>B (y-intercept)</description>
                <lsb>0</lsb>
                <msb>13</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>T0</name>
            <description>Segment end T0</description>
            <addressOffset>0x030</addressOffset>
            <access>read-only</access>
            <resetValue>0x000000E2</resetValue>
            <fields>
              <field>
                <name>T</name>
                <description>T (segment end) register</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>T1</name>
            <description>Segment end T1</description>
            <addressOffset>0x034</addressOffset>
            <access>read-only</access>
            <resetValue>0x00000000</resetValue>
            <fields>
              <field>
                <name>T</name>
                <description>T (segment end) register</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>T2</name>
            <description>Segment end T2</description>
            <addressOffset>0x038</addressOffset>
            <access>read-only</access>
            <resetValue>0x00000014</resetValue>
            <fields>
              <field>
                <name>T</name>
                <description>T (segment end) register</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>T3</name>
            <description>Segment end T3</description>
            <addressOffset>0x03C</addressOffset>
            <access>read-only</access>
            <resetValue>0x00000019</resetValue>
            <fields>
              <field>
                <name>T</name>
                <description>T (segment end) register</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>T4</name>
            <description>Segment end T4</description>
            <addressOffset>0x040</addressOffset>
            <access>read-only</access>
            <resetValue>0x00000050</resetValue>
            <fields>
              <field>
                <name>T</name>
                <description>T (segment end) register</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
        </cluster>
      </registers>
    </peripheral>
    <peripheral>
      <name>UICR</name>
      <description>User information configuration registers</description>
      <baseAddress>0x10001000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <groupName>UICR</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>UNUSED0</name>
          <description>Unspecified</description>
          <addressOffset>0x000</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>UNUSED1</name>
          <description>Unspecified</description>
          <addressOffset>0x004</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>UNUSED2</name>
          <description>Unspecified</description>
          <addressOffset>0x008</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>UNUSED3</name>
          <description>Unspecified</description>
          <addressOffset>0x010</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <dim>0xF</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>NRFFW[%s]</name>
          <description>Description collection[n]: Reserved for Nordic firmware design</description>
          <addressOffset>0x014</addressOffset>
          <access>read-write</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>NRFFW</name>
              <description>Reserved for Nordic firmware design</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>0xC</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>NRFHW[%s]</name>
          <description>Description collection[n]: Reserved for Nordic hardware design</description>
          <addressOffset>0x050</addressOffset>
          <access>read-write</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>NRFHW</name>
              <description>Reserved for Nordic hardware design</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>0x20</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>CUSTOMER[%s]</name>
          <description>Description collection[n]: Reserved for customer</description>
          <addressOffset>0x080</addressOffset>
          <access>read-write</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>CUSTOMER</name>
              <description>Reserved for customer</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>0x2</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>PSELRESET[%s]</name>
          <description>Description collection[n]: Mapping of the nRESET function (see POWER chapter for details)</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>PIN</name>
              <description>GPIO number P0.n onto which reset is exposed</description>
              <lsb>0</lsb>
              <msb>5</msb>
            </field>
            <field>
              <name>CONNECT</name>
              <description>Connection</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disconnected</name>
                  <description>Disconnect</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Connected</name>
                  <description>Connect</description>
                  <value>0</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>APPROTECT</name>
          <description>Access port protection</description>
          <addressOffset>0x208</addressOffset>
          <access>read-write</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>PALL</name>
              <description>Enable or disable access port protection.</description>
              <lsb>0</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0xFF</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>0x00</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>BPROT</name>
      <description>Block Protect</description>
      <baseAddress>0x40000000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <groupName>BPROT</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>CONFIG0</name>
          <description>Block protect configuration register 0</description>
          <addressOffset>0x600</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>REGION0</name>
              <description>Enable protection for region 0. Write '0' has no effect.</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION1</name>
              <description>Enable protection for region 1. Write '0' has no effect.</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION2</name>
              <description>Enable protection for region 2. Write '0' has no effect.</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION3</name>
              <description>Enable protection for region 3. Write '0' has no effect.</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION4</name>
              <description>Enable protection for region 4. Write '0' has no effect.</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION5</name>
              <description>Enable protection for region 5. Write '0' has no effect.</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION6</name>
              <description>Enable protection for region 6. Write '0' has no effect.</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION7</name>
              <description>Enable protection for region 7. Write '0' has no effect.</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION8</name>
              <description>Enable protection for region 8. Write '0' has no effect.</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION9</name>
              <description>Enable protection for region 9. Write '0' has no effect.</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION10</name>
              <description>Enable protection for region 10. Write '0' has no effect.</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION11</name>
              <description>Enable protection for region 11. Write '0' has no effect.</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION12</name>
              <description>Enable protection for region 12. Write '0' has no effect.</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION13</name>
              <description>Enable protection for region 13. Write '0' has no effect.</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION14</name>
              <description>Enable protection for region 14. Write '0' has no effect.</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION15</name>
              <description>Enable protection for region 15. Write '0' has no effect.</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION16</name>
              <description>Enable protection for region 16. Write '0' has no effect.</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION17</name>
              <description>Enable protection for region 17. Write '0' has no effect.</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION18</name>
              <description>Enable protection for region 18. Write '0' has no effect.</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION19</name>
              <description>Enable protection for region 19. Write '0' has no effect.</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION20</name>
              <description>Enable protection for region 20. Write '0' has no effect.</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION21</name>
              <description>Enable protection for region 21. Write '0' has no effect.</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION22</name>
              <description>Enable protection for region 22. Write '0' has no effect.</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION23</name>
              <description>Enable protection for region 23. Write '0' has no effect.</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION24</name>
              <description>Enable protection for region 24. Write '0' has no effect.</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION25</name>
              <description>Enable protection for region 25. Write '0' has no effect.</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION26</name>
              <description>Enable protection for region 26. Write '0' has no effect.</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION27</name>
              <description>Enable protection for region 27. Write '0' has no effect.</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION28</name>
              <description>Enable protection for region 28. Write '0' has no effect.</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION29</name>
              <description>Enable protection for region 29. Write '0' has no effect.</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION30</name>
              <description>Enable protection for region 30. Write '0' has no effect.</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION31</name>
              <description>Enable protection for region 31. Write '0' has no effect.</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CONFIG1</name>
          <description>Block protect configuration register 1</description>
          <addressOffset>0x604</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>REGION32</name>
              <description>Enable protection for region 32. Write '0' has no effect.</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION33</name>
              <description>Enable protection for region 33. Write '0' has no effect.</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION34</name>
              <description>Enable protection for region 34. Write '0' has no effect.</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION35</name>
              <description>Enable protection for region 35. Write '0' has no effect.</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION36</name>
              <description>Enable protection for region 36. Write '0' has no effect.</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION37</name>
              <description>Enable protection for region 37. Write '0' has no effect.</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION38</name>
              <description>Enable protection for region 38. Write '0' has no effect.</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION39</name>
              <description>Enable protection for region 39. Write '0' has no effect.</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION40</name>
              <description>Enable protection for region 40. Write '0' has no effect.</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION41</name>
              <description>Enable protection for region 41. Write '0' has no effect.</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION42</name>
              <description>Enable protection for region 42. Write '0' has no effect.</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION43</name>
              <description>Enable protection for region 43. Write '0' has no effect.</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION44</name>
              <description>Enable protection for region 44. Write '0' has no effect.</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION45</name>
              <description>Enable protection for region 45. Write '0' has no effect.</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION46</name>
              <description>Enable protection for region 46. Write '0' has no effect.</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION47</name>
              <description>Enable protection for region 47. Write '0' has no effect.</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>DISABLEINDEBUG</name>
          <description>Disable protection mechanism in debug mode</description>
          <addressOffset>0x608</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>DISABLEINDEBUG</name>
              <description>Disable the protection mechanism for NVM regions while in debug mode. This register will only disable the protection mechanism if the device is in debug mode.</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled in debug</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled in debug</description>
                  <value>0</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>UNUSED0</name>
          <description>Unspecified</description>
          <addressOffset>0x60C</addressOffset>
          <access>read-write</access>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>CLOCK</name>
      <description>Clock control</description>
      <baseAddress>0x40000000</baseAddress>
      <alternatePeripheral>BPROT</alternatePeripheral>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>POWER_CLOCK</name>
        <value>0</value>
      </interrupt>
      <groupName>CLOCK</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>TASKS_HFCLKSTART</name>
          <description>Start HFCLK crystal oscillator</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_HFCLKSTART</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_HFCLKSTOP</name>
          <description>Stop HFCLK crystal oscillator</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_HFCLKSTOP</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_LFCLKSTART</name>
          <description>Start LFCLK source</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_LFCLKSTART</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_LFCLKSTOP</name>
          <description>Stop LFCLK source</description>
          <addressOffset>0x00C</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_LFCLKSTOP</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_CAL</name>
          <description>Start calibration of LFRC oscillator</description>
          <addressOffset>0x010</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_CAL</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_CTSTART</name>
          <description>Start calibration timer</description>
          <addressOffset>0x014</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_CTSTART</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_CTSTOP</name>
          <description>Stop calibration timer</description>
          <addressOffset>0x018</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_CTSTOP</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_HFCLKSTARTED</name>
          <description>HFCLK oscillator started</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_HFCLKSTARTED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_LFCLKSTARTED</name>
          <description>LFCLK started</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_LFCLKSTARTED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_DONE</name>
          <description>Calibration of LFCLK RC oscillator complete event</description>
          <addressOffset>0x10C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_DONE</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_CTTO</name>
          <description>Calibration timer timeout</description>
          <addressOffset>0x110</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_CTTO</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>HFCLKSTARTED</name>
              <description>Write '1' to enable interrupt for HFCLKSTARTED event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LFCLKSTARTED</name>
              <description>Write '1' to enable interrupt for LFCLKSTARTED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DONE</name>
              <description>Write '1' to enable interrupt for DONE event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CTTO</name>
              <description>Write '1' to enable interrupt for CTTO event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>HFCLKSTARTED</name>
              <description>Write '1' to disable interrupt for HFCLKSTARTED event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LFCLKSTARTED</name>
              <description>Write '1' to disable interrupt for LFCLKSTARTED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DONE</name>
              <description>Write '1' to disable interrupt for DONE event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CTTO</name>
              <description>Write '1' to disable interrupt for CTTO event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>HFCLKRUN</name>
          <description>Status indicating that HFCLKSTART task has been triggered</description>
          <addressOffset>0x408</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>STATUS</name>
              <description>HFCLKSTART task triggered or not</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotTriggered</name>
                  <description>Task not triggered</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Triggered</name>
                  <description>Task triggered</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>HFCLKSTAT</name>
          <description>HFCLK status</description>
          <addressOffset>0x40C</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>SRC</name>
              <description>Source of HFCLK</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>RC</name>
                  <description>64 MHz internal oscillator (HFINT)</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Xtal</name>
                  <description>64 MHz crystal oscillator (HFXO)</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STATE</name>
              <description>HFCLK state</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotRunning</name>
                  <description>HFCLK not running</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Running</name>
                  <description>HFCLK running</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>LFCLKRUN</name>
          <description>Status indicating that LFCLKSTART task has been triggered</description>
          <addressOffset>0x414</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>STATUS</name>
              <description>LFCLKSTART task triggered or not</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotTriggered</name>
                  <description>Task not triggered</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Triggered</name>
                  <description>Task triggered</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>LFCLKSTAT</name>
          <description>LFCLK status</description>
          <addressOffset>0x418</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>SRC</name>
              <description>Source of LFCLK</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>RC</name>
                  <description>32.768 kHz RC oscillator</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Xtal</name>
                  <description>32.768 kHz crystal oscillator</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Synth</name>
                  <description>32.768 kHz synthesized from HFCLK</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STATE</name>
              <description>LFCLK state</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotRunning</name>
                  <description>LFCLK not running</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Running</name>
                  <description>LFCLK running</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>LFCLKSRCCOPY</name>
          <description>Copy of LFCLKSRC register, set when LFCLKSTART task was triggered</description>
          <addressOffset>0x41C</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>SRC</name>
              <description>Clock source</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>RC</name>
                  <description>32.768 kHz RC oscillator</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Xtal</name>
                  <description>32.768 kHz crystal oscillator</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Synth</name>
                  <description>32.768 kHz synthesized from HFCLK</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>LFCLKSRC</name>
          <description>Clock source for the LFCLK</description>
          <addressOffset>0x518</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>SRC</name>
              <description>Clock source</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>RC</name>
                  <description>32.768 kHz RC oscillator</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Xtal</name>
                  <description>32.768 kHz crystal oscillator</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Synth</name>
                  <description>32.768 kHz synthesized from HFCLK</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BYPASS</name>
              <description>Enable or disable bypass of LFCLK crystal oscillator with external clock source</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable (use with Xtal or low-swing external source)</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable (use with rail-to-rail external source)</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EXTERNAL</name>
              <description>Enable or disable external source for LFCLK</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable external source (use with Xtal)</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable use of external source instead of Xtal (SRC needs to be set to Xtal)</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CTIV</name>
          <description>Calibration timer interval</description>
          <addressOffset>0x538</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>CTIV</name>
              <description>Calibration timer interval in multiple of 0.25 seconds. Range: 0.25 seconds to 31.75 seconds.</description>
              <lsb>0</lsb>
              <msb>6</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>POWER</name>
      <description>Power control</description>
      <baseAddress>0x40000000</baseAddress>
      <alternatePeripheral>BPROT</alternatePeripheral>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>POWER_CLOCK</name>
        <value>0</value>
      </interrupt>
      <groupName>POWER</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>TASKS_CONSTLAT</name>
          <description>Enable constant latency mode</description>
          <addressOffset>0x078</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_CONSTLAT</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_LOWPWR</name>
          <description>Enable low power mode (variable latency)</description>
          <addressOffset>0x07C</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_LOWPWR</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_POFWARN</name>
          <description>Power failure warning</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_POFWARN</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_SLEEPENTER</name>
          <description>CPU entered WFI/WFE sleep</description>
          <addressOffset>0x114</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_SLEEPENTER</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_SLEEPEXIT</name>
          <description>CPU exited WFI/WFE sleep</description>
          <addressOffset>0x118</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_SLEEPEXIT</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>POFWARN</name>
              <description>Write '1' to enable interrupt for POFWARN event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SLEEPENTER</name>
              <description>Write '1' to enable interrupt for SLEEPENTER event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SLEEPEXIT</name>
              <description>Write '1' to enable interrupt for SLEEPEXIT event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>POFWARN</name>
              <description>Write '1' to disable interrupt for POFWARN event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SLEEPENTER</name>
              <description>Write '1' to disable interrupt for SLEEPENTER event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SLEEPEXIT</name>
              <description>Write '1' to disable interrupt for SLEEPEXIT event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>RESETREAS</name>
          <description>Reset reason</description>
          <addressOffset>0x400</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>RESETPIN</name>
              <description>Reset from pin-reset detected</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotDetected</name>
                  <description>Not detected</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Detected</name>
                  <description>Detected</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DOG</name>
              <description>Reset from watchdog detected</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotDetected</name>
                  <description>Not detected</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Detected</name>
                  <description>Detected</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SREQ</name>
              <description>Reset from soft reset detected</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotDetected</name>
                  <description>Not detected</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Detected</name>
                  <description>Detected</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCKUP</name>
              <description>Reset from CPU lock-up detected</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotDetected</name>
                  <description>Not detected</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Detected</name>
                  <description>Detected</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OFF</name>
              <description>Reset due to wake up from System OFF mode when wakeup is triggered from DETECT signal from GPIO</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotDetected</name>
                  <description>Not detected</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Detected</name>
                  <description>Detected</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DIF</name>
              <description>Reset due to wake up from System OFF mode when wakeup is triggered from entering into debug interface mode</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotDetected</name>
                  <description>Not detected</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Detected</name>
                  <description>Detected</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SYSTEMOFF</name>
          <description>System OFF register</description>
          <addressOffset>0x500</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>SYSTEMOFF</name>
              <description>Enable System OFF mode</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Enter</name>
                  <description>Enable System OFF mode</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>POFCON</name>
          <description>Power failure comparator configuration</description>
          <addressOffset>0x510</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>POF</name>
              <description>Enable or disable power failure comparator</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>THRESHOLD</name>
              <description>Power failure comparator threshold setting</description>
              <lsb>1</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>V17</name>
                  <description>Set threshold to 1.7 V</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>V18</name>
                  <description>Set threshold to 1.8 V</description>
                  <value>5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>V19</name>
                  <description>Set threshold to 1.9 V</description>
                  <value>6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>V20</name>
                  <description>Set threshold to 2.0 V</description>
                  <value>7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>V21</name>
                  <description>Set threshold to 2.1 V</description>
                  <value>8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>V22</name>
                  <description>Set threshold to 2.2 V</description>
                  <value>9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>V23</name>
                  <description>Set threshold to 2.3 V</description>
                  <value>10</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>V24</name>
                  <description>Set threshold to 2.4 V</description>
                  <value>11</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>V25</name>
                  <description>Set threshold to 2.5 V</description>
                  <value>12</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>V26</name>
                  <description>Set threshold to 2.6 V</description>
                  <value>13</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>V27</name>
                  <description>Set threshold to 2.7 V</description>
                  <value>14</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>V28</name>
                  <description>Set threshold to 2.8 V</description>
                  <value>15</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>GPREGRET</name>
          <description>General purpose retention register</description>
          <addressOffset>0x51C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>GPREGRET</name>
              <description>General purpose retention register</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>GPREGRET2</name>
          <description>General purpose retention register</description>
          <addressOffset>0x520</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>GPREGRET</name>
              <description>General purpose retention register</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>DCDCEN</name>
          <description>DC/DC enable register</description>
          <addressOffset>0x578</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>DCDCEN</name>
              <description>Enable or disable DC/DC converter</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <dim>8</dim>
          <dimIncrement>0x010</dimIncrement>
          <name>RAM[%s]</name>
          <description>Unspecified</description>
          <headerStructName>POWER_RAM</headerStructName>
          <addressOffset>0x900</addressOffset>
          <register>
            <name>POWER</name>
            <description>Description cluster[n]: RAMn power control register. The RAM size will vary depending on product variant, and the RAMn register will only be present if the corresponding RAM AHB slave is present on the device.</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0x0000FFFF</resetValue>
            <fields>
              <field>
                <name>S0POWER</name>
                <description>Keep RAM section S0 ON or OFF in System ON mode.</description>
                <lsb>0</lsb>
                <msb>0</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Off</name>
                    <description>Off</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>On</name>
                    <description>On</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>S1POWER</name>
                <description>Keep RAM section S1 ON or OFF in System ON mode.</description>
                <lsb>1</lsb>
                <msb>1</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Off</name>
                    <description>Off</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>On</name>
                    <description>On</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>S0RETENTION</name>
                <description>Keep retention on RAM section S0 when RAM section is in OFF</description>
                <lsb>16</lsb>
                <msb>16</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Off</name>
                    <description>Off</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>On</name>
                    <description>On</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>S1RETENTION</name>
                <description>Keep retention on RAM section S1 when RAM section is in OFF</description>
                <lsb>17</lsb>
                <msb>17</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Off</name>
                    <description>Off</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>On</name>
                    <description>On</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>POWERSET</name>
            <description>Description cluster[n]: RAMn power control set register</description>
            <addressOffset>0x004</addressOffset>
            <access>write-only</access>
            <resetValue>0x0000FFFF</resetValue>
            <fields>
              <field>
                <name>S0POWER</name>
                <description>Keep RAM section S0 of RAMn on or off in System ON mode</description>
                <lsb>0</lsb>
                <msb>0</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>On</name>
                    <description>On</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>S1POWER</name>
                <description>Keep RAM section S1 of RAMn on or off in System ON mode</description>
                <lsb>1</lsb>
                <msb>1</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>On</name>
                    <description>On</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>S0RETENTION</name>
                <description>Keep retention on RAM section S0 when RAM section is switched off</description>
                <lsb>16</lsb>
                <msb>16</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>On</name>
                    <description>On</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>S1RETENTION</name>
                <description>Keep retention on RAM section S1 when RAM section is switched off</description>
                <lsb>17</lsb>
                <msb>17</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>On</name>
                    <description>On</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>POWERCLR</name>
            <description>Description cluster[n]: RAMn power control clear register</description>
            <addressOffset>0x008</addressOffset>
            <access>write-only</access>
            <resetValue>0x0000FFFF</resetValue>
            <fields>
              <field>
                <name>S0POWER</name>
                <description>Keep RAM section S0 of RAMn on or off in System ON mode</description>
                <lsb>0</lsb>
                <msb>0</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Off</name>
                    <description>Off</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>S1POWER</name>
                <description>Keep RAM section S1 of RAMn on or off in System ON mode</description>
                <lsb>1</lsb>
                <msb>1</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Off</name>
                    <description>Off</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>S0RETENTION</name>
                <description>Keep retention on RAM section S0 when RAM section is switched off</description>
                <lsb>16</lsb>
                <msb>16</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Off</name>
                    <description>Off</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>S1RETENTION</name>
                <description>Keep retention on RAM section S1 when RAM section is switched off</description>
                <lsb>17</lsb>
                <msb>17</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Off</name>
                    <description>Off</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
      </registers>
    </peripheral>
    <peripheral>
      <name>RADIO</name>
      <description>2.4 GHz Radio</description>
      <baseAddress>0x40001000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>RADIO</name>
        <value>1</value>
      </interrupt>
      <groupName>RADIO</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>TASKS_TXEN</name>
          <description>Enable RADIO in TX mode</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_TXEN</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_RXEN</name>
          <description>Enable RADIO in RX mode</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_RXEN</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_START</name>
          <description>Start RADIO</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_START</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stop RADIO</description>
          <addressOffset>0x00C</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_STOP</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_DISABLE</name>
          <description>Disable RADIO</description>
          <addressOffset>0x010</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_DISABLE</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_RSSISTART</name>
          <description>Start the RSSI and take one single sample of the receive signal strength.</description>
          <addressOffset>0x014</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_RSSISTART</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_RSSISTOP</name>
          <description>Stop the RSSI measurement</description>
          <addressOffset>0x018</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_RSSISTOP</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_BCSTART</name>
          <description>Start the bit counter</description>
          <addressOffset>0x01C</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_BCSTART</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_BCSTOP</name>
          <description>Stop the bit counter</description>
          <addressOffset>0x020</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_BCSTOP</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_READY</name>
          <description>RADIO has ramped up and is ready to be started</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_READY</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_ADDRESS</name>
          <description>Address sent or received</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_ADDRESS</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_PAYLOAD</name>
          <description>Packet payload sent or received</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_PAYLOAD</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_END</name>
          <description>Packet sent or received</description>
          <addressOffset>0x10C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_END</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_DISABLED</name>
          <description>RADIO has been disabled</description>
          <addressOffset>0x110</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_DISABLED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_DEVMATCH</name>
          <description>A device address match occurred on the last received packet</description>
          <addressOffset>0x114</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_DEVMATCH</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_DEVMISS</name>
          <description>No device address match occurred on the last received packet</description>
          <addressOffset>0x118</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_DEVMISS</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_RSSIEND</name>
          <description>Sampling of receive signal strength complete.</description>
          <addressOffset>0x11C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_RSSIEND</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_BCMATCH</name>
          <description>Bit counter reached bit count value.</description>
          <addressOffset>0x128</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_BCMATCH</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_CRCOK</name>
          <description>Packet received with CRC ok</description>
          <addressOffset>0x130</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_CRCOK</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_CRCERROR</name>
          <description>Packet received with CRC error</description>
          <addressOffset>0x134</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_CRCERROR</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>READY_START</name>
              <description>Shortcut between READY event and START task</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>END_DISABLE</name>
              <description>Shortcut between END event and DISABLE task</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DISABLED_TXEN</name>
              <description>Shortcut between DISABLED event and TXEN task</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DISABLED_RXEN</name>
              <description>Shortcut between DISABLED event and RXEN task</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ADDRESS_RSSISTART</name>
              <description>Shortcut between ADDRESS event and RSSISTART task</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>END_START</name>
              <description>Shortcut between END event and START task</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ADDRESS_BCSTART</name>
              <description>Shortcut between ADDRESS event and BCSTART task</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DISABLED_RSSISTOP</name>
              <description>Shortcut between DISABLED event and RSSISTOP task</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>READY</name>
              <description>Write '1' to enable interrupt for READY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ADDRESS</name>
              <description>Write '1' to enable interrupt for ADDRESS event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PAYLOAD</name>
              <description>Write '1' to enable interrupt for PAYLOAD event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>END</name>
              <description>Write '1' to enable interrupt for END event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DISABLED</name>
              <description>Write '1' to enable interrupt for DISABLED event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DEVMATCH</name>
              <description>Write '1' to enable interrupt for DEVMATCH event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DEVMISS</name>
              <description>Write '1' to enable interrupt for DEVMISS event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RSSIEND</name>
              <description>Write '1' to enable interrupt for RSSIEND event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCMATCH</name>
              <description>Write '1' to enable interrupt for BCMATCH event</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CRCOK</name>
              <description>Write '1' to enable interrupt for CRCOK event</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CRCERROR</name>
              <description>Write '1' to enable interrupt for CRCERROR event</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>READY</name>
              <description>Write '1' to disable interrupt for READY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ADDRESS</name>
              <description>Write '1' to disable interrupt for ADDRESS event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PAYLOAD</name>
              <description>Write '1' to disable interrupt for PAYLOAD event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>END</name>
              <description>Write '1' to disable interrupt for END event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DISABLED</name>
              <description>Write '1' to disable interrupt for DISABLED event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DEVMATCH</name>
              <description>Write '1' to disable interrupt for DEVMATCH event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DEVMISS</name>
              <description>Write '1' to disable interrupt for DEVMISS event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RSSIEND</name>
              <description>Write '1' to disable interrupt for RSSIEND event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCMATCH</name>
              <description>Write '1' to disable interrupt for BCMATCH event</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CRCOK</name>
              <description>Write '1' to disable interrupt for CRCOK event</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CRCERROR</name>
              <description>Write '1' to disable interrupt for CRCERROR event</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CRCSTATUS</name>
          <description>CRC status</description>
          <addressOffset>0x400</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>CRCSTATUS</name>
              <description>CRC status of packet received</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CRCError</name>
                  <description>Packet received with CRC error</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CRCOk</name>
                  <description>Packet received with CRC ok</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>RXMATCH</name>
          <description>Received address</description>
          <addressOffset>0x408</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXMATCH</name>
              <description>Received address</description>
              <lsb>0</lsb>
              <msb>2</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>RXCRC</name>
          <description>CRC field of previously received packet</description>
          <addressOffset>0x40C</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXCRC</name>
              <description>CRC field of previously received packet</description>
              <lsb>0</lsb>
              <msb>23</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>DAI</name>
          <description>Device address match index</description>
          <addressOffset>0x410</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>DAI</name>
              <description>Device address match index</description>
              <lsb>0</lsb>
              <msb>2</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>PACKETPTR</name>
          <description>Packet pointer</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>PACKETPTR</name>
              <description>Packet pointer</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>FREQUENCY</name>
          <description>Frequency</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000002</resetValue>
          <fields>
            <field>
              <name>FREQUENCY</name>
              <description>Radio channel frequency</description>
              <lsb>0</lsb>
              <msb>6</msb>
            </field>
            <field>
              <name>MAP</name>
              <description>Channel map selection.</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Default</name>
                  <description>Channel map between 2400 MHZ .. 2500 MHz</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Channel map between 2360 MHZ .. 2460 MHz</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>TXPOWER</name>
          <description>Output power</description>
          <addressOffset>0x50C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TXPOWER</name>
              <description>RADIO output power.</description>
              <lsb>0</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Pos4dBm</name>
                  <description>+4 dBm</description>
                  <value>0x04</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Pos3dBm</name>
                  <description>+3 dBm</description>
                  <value>0x03</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>0dBm</name>
                  <description>0 dBm</description>
                  <value>0x00</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Neg4dBm</name>
                  <description>-4 dBm</description>
                  <value>0xFC</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Neg8dBm</name>
                  <description>-8 dBm</description>
                  <value>0xF8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Neg12dBm</name>
                  <description>-12 dBm</description>
                  <value>0xF4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Neg16dBm</name>
                  <description>-16 dBm</description>
                  <value>0xF0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Neg20dBm</name>
                  <description>-20 dBm</description>
                  <value>0xEC</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Neg30dBm</name>
                  <description>Deprecated enumerator -  -40 dBm</description>
                  <value>0xFF</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Neg40dBm</name>
                  <description>-40 dBm</description>
                  <value>0xD8</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE</name>
          <description>Data rate and modulation</description>
          <addressOffset>0x510</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>MODE</name>
              <description>Radio data rate and modulation setting. The radio supports Frequency-shift Keying (FSK) modulation.</description>
              <lsb>0</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Nrf_1Mbit</name>
                  <description>1 Mbit/s Nordic proprietary radio mode</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Nrf_2Mbit</name>
                  <description>2 Mbit/s Nordic proprietary radio mode</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Ble_1Mbit</name>
                  <description>1 Mbit/s Bluetooth Low Energy</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Ble_2Mbit</name>
                  <description>2 Mbit/s Bluetooth Low Energy</description>
                  <value>4</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>PCNF0</name>
          <description>Packet configuration register 0</description>
          <addressOffset>0x514</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>LFLEN</name>
              <description>Length on air of LENGTH field in number of bits.</description>
              <lsb>0</lsb>
              <msb>3</msb>
            </field>
            <field>
              <name>S0LEN</name>
              <description>Length on air of S0 field in number of bytes.</description>
              <lsb>8</lsb>
              <msb>8</msb>
            </field>
            <field>
              <name>S1LEN</name>
              <description>Length on air of S1 field in number of bits.</description>
              <lsb>16</lsb>
              <msb>19</msb>
            </field>
            <field>
              <name>S1INCL</name>
              <description>Include or exclude S1 field in RAM</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Automatic</name>
                  <description>Include S1 field in RAM only if S1LEN &amp;gt; 0</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Include</name>
                  <description>Always include S1 field in RAM independent of S1LEN</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PLEN</name>
              <description>Length of preamble on air. Decision point: TASKS_START task</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>8bit</name>
                  <description>8-bit preamble</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16bit</name>
                  <description>16-bit preamble</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>PCNF1</name>
          <description>Packet configuration register 1</description>
          <addressOffset>0x518</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>MAXLEN</name>
              <description>Maximum length of packet payload. If the packet payload is larger than MAXLEN, the radio will truncate the payload to MAXLEN.</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
            <field>
              <name>STATLEN</name>
              <description>Static length in number of bytes</description>
              <lsb>8</lsb>
              <msb>15</msb>
            </field>
            <field>
              <name>BALEN</name>
              <description>Base address length in number of bytes</description>
              <lsb>16</lsb>
              <msb>18</msb>
            </field>
            <field>
              <name>ENDIAN</name>
              <description>On air endianness of packet, this applies to the S0, LENGTH, S1 and the PAYLOAD fields.</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Little</name>
                  <description>Least Significant bit on air first</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Big</name>
                  <description>Most significant bit on air first</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WHITEEN</name>
              <description>Enable or disable packet whitening</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>BASE0</name>
          <description>Base address 0</description>
          <addressOffset>0x51C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>BASE0</name>
              <description>Base address 0</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>BASE1</name>
          <description>Base address 1</description>
          <addressOffset>0x520</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>BASE1</name>
              <description>Base address 1</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>PREFIX0</name>
          <description>Prefixes bytes for logical addresses 0-3</description>
          <addressOffset>0x524</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>AP0</name>
              <description>Address prefix 0.</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
            <field>
              <name>AP1</name>
              <description>Address prefix 1.</description>
              <lsb>8</lsb>
              <msb>15</msb>
            </field>
            <field>
              <name>AP2</name>
              <description>Address prefix 2.</description>
              <lsb>16</lsb>
              <msb>23</msb>
            </field>
            <field>
              <name>AP3</name>
              <description>Address prefix 3.</description>
              <lsb>24</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>PREFIX1</name>
          <description>Prefixes bytes for logical addresses 4-7</description>
          <addressOffset>0x528</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>AP4</name>
              <description>Address prefix 4.</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
            <field>
              <name>AP5</name>
              <description>Address prefix 5.</description>
              <lsb>8</lsb>
              <msb>15</msb>
            </field>
            <field>
              <name>AP6</name>
              <description>Address prefix 6.</description>
              <lsb>16</lsb>
              <msb>23</msb>
            </field>
            <field>
              <name>AP7</name>
              <description>Address prefix 7.</description>
              <lsb>24</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TXADDRESS</name>
          <description>Transmit address select</description>
          <addressOffset>0x52C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TXADDRESS</name>
              <description>Transmit address select</description>
              <lsb>0</lsb>
              <msb>2</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>RXADDRESSES</name>
          <description>Receive address select</description>
          <addressOffset>0x530</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ADDR0</name>
              <description>Enable or disable reception on logical address 0.</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ADDR1</name>
              <description>Enable or disable reception on logical address 1.</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ADDR2</name>
              <description>Enable or disable reception on logical address 2.</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ADDR3</name>
              <description>Enable or disable reception on logical address 3.</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ADDR4</name>
              <description>Enable or disable reception on logical address 4.</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ADDR5</name>
              <description>Enable or disable reception on logical address 5.</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ADDR6</name>
              <description>Enable or disable reception on logical address 6.</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ADDR7</name>
              <description>Enable or disable reception on logical address 7.</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CRCCNF</name>
          <description>CRC configuration</description>
          <addressOffset>0x534</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>LEN</name>
              <description>CRC length in number of bytes.</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>CRC length is zero and CRC calculation is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>One</name>
                  <description>CRC length is one byte and CRC calculation is enabled</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Two</name>
                  <description>CRC length is two bytes and CRC calculation is enabled</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Three</name>
                  <description>CRC length is three bytes and CRC calculation is enabled</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SKIPADDR</name>
              <description>Include or exclude packet address field out of CRC calculation.</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Include</name>
                  <description>CRC calculation includes address field</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Skip</name>
                  <description>CRC calculation does not include address field. The CRC calculation will start at the first byte after the address.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CRCPOLY</name>
          <description>CRC polynomial</description>
          <addressOffset>0x538</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CRCPOLY</name>
              <description>CRC polynomial</description>
              <lsb>0</lsb>
              <msb>23</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>CRCINIT</name>
          <description>CRC initial value</description>
          <addressOffset>0x53C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>CRCINIT</name>
              <description>CRC initial value</description>
              <lsb>0</lsb>
              <msb>23</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>UNUSED0</name>
          <description>Unspecified</description>
          <addressOffset>0x540</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>TIFS</name>
          <description>Inter Frame Spacing in us</description>
          <addressOffset>0x544</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TIFS</name>
              <description>Inter Frame Spacing in us</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>RSSISAMPLE</name>
          <description>RSSI sample</description>
          <addressOffset>0x548</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>RSSISAMPLE</name>
              <description>RSSI sample</description>
              <lsb>0</lsb>
              <msb>6</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>STATE</name>
          <description>Current radio state</description>
          <addressOffset>0x550</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>STATE</name>
              <description>Current radio state</description>
              <lsb>0</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>RADIO is in the Disabled state</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RxRu</name>
                  <description>RADIO is in the RXRU state</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RxIdle</name>
                  <description>RADIO is in the RXIDLE state</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Rx</name>
                  <description>RADIO is in the RX state</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RxDisable</name>
                  <description>RADIO is in the RXDISABLED state</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TxRu</name>
                  <description>RADIO is in the TXRU state</description>
                  <value>9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TxIdle</name>
                  <description>RADIO is in the TXIDLE state</description>
                  <value>10</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Tx</name>
                  <description>RADIO is in the TX state</description>
                  <value>11</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TxDisable</name>
                  <description>RADIO is in the TXDISABLED state</description>
                  <value>12</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>DATAWHITEIV</name>
          <description>Data whitening initial value</description>
          <addressOffset>0x554</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000040</resetValue>
          <fields>
            <field>
              <name>DATAWHITEIV</name>
              <description>Data whitening initial value. Bit 6 is hard-wired to '1', writing '0' to it has no effect, and it will always be read back and used by the device as '1'.</description>
              <lsb>0</lsb>
              <msb>6</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>BCC</name>
          <description>Bit counter compare</description>
          <addressOffset>0x560</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>BCC</name>
              <description>Bit counter compare</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>0x8</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>DAB[%s]</name>
          <description>Description collection[n]: Device address base segment n</description>
          <addressOffset>0x600</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>DAB</name>
              <description>Device address base segment n</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>0x8</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>DAP[%s]</name>
          <description>Description collection[n]: Device address prefix n</description>
          <addressOffset>0x620</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>DAP</name>
              <description>Device address prefix n</description>
              <lsb>0</lsb>
              <msb>15</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>DACNF</name>
          <description>Device address match configuration</description>
          <addressOffset>0x640</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENA0</name>
              <description>Enable or disable device address matching using device address 0</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENA1</name>
              <description>Enable or disable device address matching using device address 1</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENA2</name>
              <description>Enable or disable device address matching using device address 2</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENA3</name>
              <description>Enable or disable device address matching using device address 3</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENA4</name>
              <description>Enable or disable device address matching using device address 4</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENA5</name>
              <description>Enable or disable device address matching using device address 5</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENA6</name>
              <description>Enable or disable device address matching using device address 6</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENA7</name>
              <description>Enable or disable device address matching using device address 7</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXADD0</name>
              <description>TxAdd for device address 0</description>
              <lsb>8</lsb>
              <msb>8</msb>
            </field>
            <field>
              <name>TXADD1</name>
              <description>TxAdd for device address 1</description>
              <lsb>9</lsb>
              <msb>9</msb>
            </field>
            <field>
              <name>TXADD2</name>
              <description>TxAdd for device address 2</description>
              <lsb>10</lsb>
              <msb>10</msb>
            </field>
            <field>
              <name>TXADD3</name>
              <description>TxAdd for device address 3</description>
              <lsb>11</lsb>
              <msb>11</msb>
            </field>
            <field>
              <name>TXADD4</name>
              <description>TxAdd for device address 4</description>
              <lsb>12</lsb>
              <msb>12</msb>
            </field>
            <field>
              <name>TXADD5</name>
              <description>TxAdd for device address 5</description>
              <lsb>13</lsb>
              <msb>13</msb>
            </field>
            <field>
              <name>TXADD6</name>
              <description>TxAdd for device address 6</description>
              <lsb>14</lsb>
              <msb>14</msb>
            </field>
            <field>
              <name>TXADD7</name>
              <description>TxAdd for device address 7</description>
              <lsb>15</lsb>
              <msb>15</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>MODECNF0</name>
          <description>Radio mode configuration register 0</description>
          <addressOffset>0x650</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000200</resetValue>
          <fields>
            <field>
              <name>RU</name>
              <description>Radio ramp-up time</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Default</name>
                  <description>Default ramp-up time (tRXEN), compatible with firmware written for nRF51</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Fast</name>
                  <description>Fast ramp-up (tRXEN,FAST), see electrical specification for more information</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DTX</name>
              <description>Default TX value</description>
              <lsb>8</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>B1</name>
                  <description>Transmit '1'</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>B0</name>
                  <description>Transmit '0'</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Center</name>
                  <description>Transmit center frequency</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>POWER</name>
          <description>Peripheral power control</description>
          <addressOffset>0xFFC</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>POWER</name>
              <description>Peripheral power control. The peripheral and its registers will be reset to its initial state by switching the peripheral off and then back on again.</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Peripheral is powered off</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Peripheral is powered on</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>UARTE0</name>
      <description>UART with EasyDMA</description>
      <baseAddress>0x40002000</baseAddress>
      <headerStructName>UARTE</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>UARTE0</name>
        <value>2</value>
      </interrupt>
      <groupName>UARTE</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>TASKS_STARTRX</name>
          <description>Start UART receiver</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_STARTRX</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_STOPRX</name>
          <description>Stop UART receiver</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_STOPRX</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_STARTTX</name>
          <description>Start UART transmitter</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_STARTTX</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_STOPTX</name>
          <description>Stop UART transmitter</description>
          <addressOffset>0x00C</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_STOPTX</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_FLUSHRX</name>
          <description>Flush RX FIFO into RX buffer</description>
          <addressOffset>0x02C</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_FLUSHRX</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_CTS</name>
          <description>CTS is activated (set low). Clear To Send.</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_CTS</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_NCTS</name>
          <description>CTS is deactivated (set high). Not Clear To Send.</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_NCTS</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_RXDRDY</name>
          <description>Data received in RXD (but potentially not yet transferred to Data RAM)</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_RXDRDY</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_ENDRX</name>
          <description>Receive buffer is filled up</description>
          <addressOffset>0x110</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_ENDRX</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_TXDRDY</name>
          <description>Data sent from TXD</description>
          <addressOffset>0x11C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_TXDRDY</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_ENDTX</name>
          <description>Last TX byte transmitted</description>
          <addressOffset>0x120</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_ENDTX</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_ERROR</name>
          <description>Error detected</description>
          <addressOffset>0x124</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_ERROR</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_RXTO</name>
          <description>Receiver timeout</description>
          <addressOffset>0x144</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_RXTO</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_RXSTARTED</name>
          <description>UART receiver has started</description>
          <addressOffset>0x14C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_RXSTARTED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_TXSTARTED</name>
          <description>UART transmitter has started</description>
          <addressOffset>0x150</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_TXSTARTED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_TXSTOPPED</name>
          <description>Transmitter stopped</description>
          <addressOffset>0x158</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_TXSTOPPED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENDRX_STARTRX</name>
              <description>Shortcut between ENDRX event and STARTRX task</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDRX_STOPRX</name>
              <description>Shortcut between ENDRX event and STOPRX task</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTEN</name>
          <description>Enable or disable interrupt</description>
          <addressOffset>0x300</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>CTS</name>
              <description>Enable or disable interrupt for CTS event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NCTS</name>
              <description>Enable or disable interrupt for NCTS event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXDRDY</name>
              <description>Enable or disable interrupt for RXDRDY event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDRX</name>
              <description>Enable or disable interrupt for ENDRX event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXDRDY</name>
              <description>Enable or disable interrupt for TXDRDY event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDTX</name>
              <description>Enable or disable interrupt for ENDTX event</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Enable or disable interrupt for ERROR event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXTO</name>
              <description>Enable or disable interrupt for RXTO event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXSTARTED</name>
              <description>Enable or disable interrupt for RXSTARTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXSTARTED</name>
              <description>Enable or disable interrupt for TXSTARTED event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXSTOPPED</name>
              <description>Enable or disable interrupt for TXSTOPPED event</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>CTS</name>
              <description>Write '1' to enable interrupt for CTS event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NCTS</name>
              <description>Write '1' to enable interrupt for NCTS event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXDRDY</name>
              <description>Write '1' to enable interrupt for RXDRDY event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDRX</name>
              <description>Write '1' to enable interrupt for ENDRX event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXDRDY</name>
              <description>Write '1' to enable interrupt for TXDRDY event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDTX</name>
              <description>Write '1' to enable interrupt for ENDTX event</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Write '1' to enable interrupt for ERROR event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXTO</name>
              <description>Write '1' to enable interrupt for RXTO event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXSTARTED</name>
              <description>Write '1' to enable interrupt for RXSTARTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXSTARTED</name>
              <description>Write '1' to enable interrupt for TXSTARTED event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXSTOPPED</name>
              <description>Write '1' to enable interrupt for TXSTOPPED event</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>CTS</name>
              <description>Write '1' to disable interrupt for CTS event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NCTS</name>
              <description>Write '1' to disable interrupt for NCTS event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXDRDY</name>
              <description>Write '1' to disable interrupt for RXDRDY event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDRX</name>
              <description>Write '1' to disable interrupt for ENDRX event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXDRDY</name>
              <description>Write '1' to disable interrupt for TXDRDY event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDTX</name>
              <description>Write '1' to disable interrupt for ENDTX event</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Write '1' to disable interrupt for ERROR event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXTO</name>
              <description>Write '1' to disable interrupt for RXTO event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXSTARTED</name>
              <description>Write '1' to disable interrupt for RXSTARTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXSTARTED</name>
              <description>Write '1' to disable interrupt for TXSTARTED event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXSTOPPED</name>
              <description>Write '1' to disable interrupt for TXSTOPPED event</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ERRORSRC</name>
          <description>Error source Note : this register is read / write one to clear.</description>
          <addressOffset>0x480</addressOffset>
          <access>read-write</access>
          <modifiedWriteValues>oneToClear</modifiedWriteValues>
          <fields>
            <field>
              <name>OVERRUN</name>
              <description>Overrun error</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>NotPresent</name>
                  <description>Read: error not present</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Present</name>
                  <description>Read: error present</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PARITY</name>
              <description>Parity error</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>NotPresent</name>
                  <description>Read: error not present</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Present</name>
                  <description>Read: error present</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FRAMING</name>
              <description>Framing error occurred</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>NotPresent</name>
                  <description>Read: error not present</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Present</name>
                  <description>Read: error present</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BREAK</name>
              <description>Break condition</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>NotPresent</name>
                  <description>Read: error not present</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Present</name>
                  <description>Read: error present</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Enable UART</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable UARTE</description>
              <lsb>0</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable UARTE</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable UARTE</description>
                  <value>8</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <name>PSEL</name>
          <description>Unspecified</description>
          <headerStructName>UARTE_PSEL</headerStructName>
          <addressOffset>0x508</addressOffset>
          <register>
            <name>RTS</name>
            <description>Pin select for RTS signal</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>TXD</name>
            <description>Pin select for TXD signal</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>CTS</name>
            <description>Pin select for CTS signal</description>
            <addressOffset>0x008</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>RXD</name>
            <description>Pin select for RXD signal</description>
            <addressOffset>0x00C</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <name>BAUDRATE</name>
          <description>Baud rate. Accuracy depends on the HFCLK source selected.</description>
          <addressOffset>0x524</addressOffset>
          <access>read-write</access>
          <resetValue>0x04000000</resetValue>
          <fields>
            <field>
              <name>BAUDRATE</name>
              <description>Baud rate</description>
              <lsb>0</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Baud1200</name>
                  <description>1200 baud (actual rate: 1205)</description>
                  <value>0x0004F000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud2400</name>
                  <description>2400 baud (actual rate: 2396)</description>
                  <value>0x0009D000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud4800</name>
                  <description>4800 baud (actual rate: 4808)</description>
                  <value>0x0013B000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud9600</name>
                  <description>9600 baud (actual rate: 9598)</description>
                  <value>0x00275000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud14400</name>
                  <description>14400 baud (actual rate: 14401)</description>
                  <value>0x003AF000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud19200</name>
                  <description>19200 baud (actual rate: 19208)</description>
                  <value>0x004EA000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud28800</name>
                  <description>28800 baud (actual rate: 28777)</description>
                  <value>0x0075C000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud31250</name>
                  <description>31250 baud</description>
                  <value>0x00800000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud38400</name>
                  <description>38400 baud (actual rate: 38369)</description>
                  <value>0x009D0000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud56000</name>
                  <description>56000 baud (actual rate: 55944)</description>
                  <value>0x00E50000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud57600</name>
                  <description>57600 baud (actual rate: 57554)</description>
                  <value>0x00EB0000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud76800</name>
                  <description>76800 baud (actual rate: 76923)</description>
                  <value>0x013A9000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud115200</name>
                  <description>115200 baud (actual rate: 115108)</description>
                  <value>0x01D60000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud230400</name>
                  <description>230400 baud (actual rate: 231884)</description>
                  <value>0x03B00000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud250000</name>
                  <description>250000 baud</description>
                  <value>0x04000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud460800</name>
                  <description>460800 baud (actual rate: 457143)</description>
                  <value>0x07400000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud921600</name>
                  <description>921600 baud (actual rate: 941176)</description>
                  <value>0x0F000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud1M</name>
                  <description>1Mega baud</description>
                  <value>0x10000000</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <name>RXD</name>
          <description>RXD EasyDMA channel</description>
          <headerStructName>UARTE_RXD</headerStructName>
          <addressOffset>0x534</addressOffset>
          <register>
            <name>PTR</name>
            <description>Data pointer</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>PTR</name>
                <description>Data pointer</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>MAXCNT</name>
            <description>Maximum number of bytes in receive buffer</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>MAXCNT</name>
                <description>Maximum number of bytes in receive buffer</description>
                <lsb>0</lsb>
                <msb>9</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>AMOUNT</name>
            <description>Number of bytes transferred in the last transaction</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>AMOUNT</name>
                <description>Number of bytes transferred in the last transaction</description>
                <lsb>0</lsb>
                <msb>9</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <name>TXD</name>
          <description>TXD EasyDMA channel</description>
          <headerStructName>UARTE_TXD</headerStructName>
          <addressOffset>0x544</addressOffset>
          <register>
            <name>PTR</name>
            <description>Data pointer</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>PTR</name>
                <description>Data pointer</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>MAXCNT</name>
            <description>Maximum number of bytes in transmit buffer</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>MAXCNT</name>
                <description>Maximum number of bytes in transmit buffer</description>
                <lsb>0</lsb>
                <msb>9</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>AMOUNT</name>
            <description>Number of bytes transferred in the last transaction</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>AMOUNT</name>
                <description>Number of bytes transferred in the last transaction</description>
                <lsb>0</lsb>
                <msb>9</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <name>CONFIG</name>
          <description>Configuration of parity and hardware flow control</description>
          <addressOffset>0x56C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>HWFC</name>
              <description>Hardware flow control</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PARITY</name>
              <description>Parity</description>
              <lsb>1</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude parity bit</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include even parity bit</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STOP</name>
              <description>Stop bits</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>One</name>
                  <description>One stop bit</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Two</name>
                  <description>Two stop bits</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>TWIM0</name>
      <description>I2C compatible Two-Wire Master Interface with EasyDMA</description>
      <baseAddress>0x40003000</baseAddress>
      <headerStructName>TWIM</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>TWIM0_TWIS0</name>
        <value>3</value>
      </interrupt>
      <groupName>TWIM</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>TASKS_STARTRX</name>
          <description>Start TWI receive sequence</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_STARTRX</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_STARTTX</name>
          <description>Start TWI transmit sequence</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_STARTTX</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stop TWI transaction. Must be issued while the TWI master is not suspended.</description>
          <addressOffset>0x014</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_STOP</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_SUSPEND</name>
          <description>Suspend TWI transaction</description>
          <addressOffset>0x01C</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_SUSPEND</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_RESUME</name>
          <description>Resume TWI transaction</description>
          <addressOffset>0x020</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_RESUME</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_STOPPED</name>
          <description>TWI stopped</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_STOPPED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_ERROR</name>
          <description>TWI error</description>
          <addressOffset>0x124</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_ERROR</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_SUSPENDED</name>
          <description>Last byte has been sent out after the SUSPEND task has been issued, TWI traffic is now suspended.</description>
          <addressOffset>0x148</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_SUSPENDED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_RXSTARTED</name>
          <description>Receive sequence started</description>
          <addressOffset>0x14C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_RXSTARTED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_TXSTARTED</name>
          <description>Transmit sequence started</description>
          <addressOffset>0x150</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_TXSTARTED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_LASTRX</name>
          <description>Byte boundary, starting to receive the last byte</description>
          <addressOffset>0x15C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_LASTRX</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_LASTTX</name>
          <description>Byte boundary, starting to transmit the last byte</description>
          <addressOffset>0x160</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_LASTTX</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>LASTTX_STARTRX</name>
              <description>Shortcut between LASTTX event and STARTRX task</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LASTTX_SUSPEND</name>
              <description>Shortcut between LASTTX event and SUSPEND task</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LASTTX_STOP</name>
              <description>Shortcut between LASTTX event and STOP task</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LASTRX_STARTTX</name>
              <description>Shortcut between LASTRX event and STARTTX task</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LASTRX_SUSPEND</name>
              <description>Shortcut between LASTRX event and SUSPEND task</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LASTRX_STOP</name>
              <description>Shortcut between LASTRX event and STOP task</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTEN</name>
          <description>Enable or disable interrupt</description>
          <addressOffset>0x300</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STOPPED</name>
              <description>Enable or disable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Enable or disable interrupt for ERROR event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SUSPENDED</name>
              <description>Enable or disable interrupt for SUSPENDED event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXSTARTED</name>
              <description>Enable or disable interrupt for RXSTARTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXSTARTED</name>
              <description>Enable or disable interrupt for TXSTARTED event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LASTRX</name>
              <description>Enable or disable interrupt for LASTRX event</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LASTTX</name>
              <description>Enable or disable interrupt for LASTTX event</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to enable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Write '1' to enable interrupt for ERROR event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SUSPENDED</name>
              <description>Write '1' to enable interrupt for SUSPENDED event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXSTARTED</name>
              <description>Write '1' to enable interrupt for RXSTARTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXSTARTED</name>
              <description>Write '1' to enable interrupt for TXSTARTED event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LASTRX</name>
              <description>Write '1' to enable interrupt for LASTRX event</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LASTTX</name>
              <description>Write '1' to enable interrupt for LASTTX event</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to disable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Write '1' to disable interrupt for ERROR event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SUSPENDED</name>
              <description>Write '1' to disable interrupt for SUSPENDED event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXSTARTED</name>
              <description>Write '1' to disable interrupt for RXSTARTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXSTARTED</name>
              <description>Write '1' to disable interrupt for TXSTARTED event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LASTRX</name>
              <description>Write '1' to disable interrupt for LASTRX event</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LASTTX</name>
              <description>Write '1' to disable interrupt for LASTTX event</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ERRORSRC</name>
          <description>Error source</description>
          <addressOffset>0x4C4</addressOffset>
          <access>read-write</access>
          <modifiedWriteValues>oneToClear</modifiedWriteValues>
          <fields>
            <field>
              <name>OVERRUN</name>
              <description>Overrun error</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotReceived</name>
                  <description>Error did not occur</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Received</name>
                  <description>Error occurred</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ANACK</name>
              <description>NACK received after sending the address (write '1' to clear)</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotReceived</name>
                  <description>Error did not occur</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Received</name>
                  <description>Error occurred</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DNACK</name>
              <description>NACK received after sending a data byte (write '1' to clear)</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotReceived</name>
                  <description>Error did not occur</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Received</name>
                  <description>Error occurred</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Enable TWIM</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable TWIM</description>
              <lsb>0</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable TWIM</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable TWIM</description>
                  <value>6</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <name>PSEL</name>
          <description>Unspecified</description>
          <headerStructName>TWIM_PSEL</headerStructName>
          <addressOffset>0x508</addressOffset>
          <register>
            <name>SCL</name>
            <description>Pin select for SCL signal</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>SDA</name>
            <description>Pin select for SDA signal</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <name>FREQUENCY</name>
          <description>TWI frequency. Accuracy depends on the HFCLK source selected.</description>
          <addressOffset>0x524</addressOffset>
          <access>read-write</access>
          <resetValue>0x04000000</resetValue>
          <fields>
            <field>
              <name>FREQUENCY</name>
              <description>TWI master clock frequency</description>
              <lsb>0</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>K100</name>
                  <description>100 kbps</description>
                  <value>0x01980000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>K250</name>
                  <description>250 kbps</description>
                  <value>0x04000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>K400</name>
                  <description>400 kbps</description>
                  <value>0x06400000</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <name>RXD</name>
          <description>RXD EasyDMA channel</description>
          <headerStructName>TWIM_RXD</headerStructName>
          <addressOffset>0x534</addressOffset>
          <register>
            <name>PTR</name>
            <description>Data pointer</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>PTR</name>
                <description>Data pointer</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>MAXCNT</name>
            <description>Maximum number of bytes in receive buffer</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>MAXCNT</name>
                <description>Maximum number of bytes in receive buffer</description>
                <lsb>0</lsb>
                <msb>9</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>AMOUNT</name>
            <description>Number of bytes transferred in the last transaction</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>AMOUNT</name>
                <description>Number of bytes transferred in the last transaction. In case of NACK error, includes the NACK'ed byte.</description>
                <lsb>0</lsb>
                <msb>9</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>LIST</name>
            <description>EasyDMA list type</description>
            <addressOffset>0x00C</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>LIST</name>
                <description>List type</description>
                <lsb>0</lsb>
                <msb>2</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disabled</name>
                    <description>Disable EasyDMA list</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>ArrayList</name>
                    <description>Use array list</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <name>TXD</name>
          <description>TXD EasyDMA channel</description>
          <headerStructName>TWIM_TXD</headerStructName>
          <addressOffset>0x544</addressOffset>
          <register>
            <name>PTR</name>
            <description>Data pointer</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>PTR</name>
                <description>Data pointer</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>MAXCNT</name>
            <description>Maximum number of bytes in transmit buffer</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>MAXCNT</name>
                <description>Maximum number of bytes in transmit buffer</description>
                <lsb>0</lsb>
                <msb>9</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>AMOUNT</name>
            <description>Number of bytes transferred in the last transaction</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>AMOUNT</name>
                <description>Number of bytes transferred in the last transaction. In case of NACK error, includes the NACK'ed byte.</description>
                <lsb>0</lsb>
                <msb>9</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>LIST</name>
            <description>EasyDMA list type</description>
            <addressOffset>0x00C</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>LIST</name>
                <description>List type</description>
                <lsb>0</lsb>
                <msb>2</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disabled</name>
                    <description>Disable EasyDMA list</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>ArrayList</name>
                    <description>Use array list</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <name>ADDRESS</name>
          <description>Address used in the TWI transfer</description>
          <addressOffset>0x588</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ADDRESS</name>
              <description>Address used in the TWI transfer</description>
              <lsb>0</lsb>
              <msb>6</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>TWIS0</name>
      <description>I2C compatible Two-Wire Slave Interface with EasyDMA</description>
      <baseAddress>0x40003000</baseAddress>
      <alternatePeripheral>TWIM0</alternatePeripheral>
      <headerStructName>TWIS</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>TWIM0_TWIS0</name>
        <value>3</value>
      </interrupt>
      <groupName>TWIS</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>TASKS_STOP</name>
          <description>Stop TWI transaction</description>
          <addressOffset>0x014</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_STOP</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_SUSPEND</name>
          <description>Suspend TWI transaction</description>
          <addressOffset>0x01C</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_SUSPEND</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_RESUME</name>
          <description>Resume TWI transaction</description>
          <addressOffset>0x020</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_RESUME</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_PREPARERX</name>
          <description>Prepare the TWI slave to respond to a write command</description>
          <addressOffset>0x030</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_PREPARERX</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_PREPARETX</name>
          <description>Prepare the TWI slave to respond to a read command</description>
          <addressOffset>0x034</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_PREPARETX</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_STOPPED</name>
          <description>TWI stopped</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_STOPPED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_ERROR</name>
          <description>TWI error</description>
          <addressOffset>0x124</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_ERROR</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_RXSTARTED</name>
          <description>Receive sequence started</description>
          <addressOffset>0x14C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_RXSTARTED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_TXSTARTED</name>
          <description>Transmit sequence started</description>
          <addressOffset>0x150</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_TXSTARTED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_WRITE</name>
          <description>Write command received</description>
          <addressOffset>0x164</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_WRITE</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_READ</name>
          <description>Read command received</description>
          <addressOffset>0x168</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_READ</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>WRITE_SUSPEND</name>
              <description>Shortcut between WRITE event and SUSPEND task</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>READ_SUSPEND</name>
              <description>Shortcut between READ event and SUSPEND task</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTEN</name>
          <description>Enable or disable interrupt</description>
          <addressOffset>0x300</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STOPPED</name>
              <description>Enable or disable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Enable or disable interrupt for ERROR event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXSTARTED</name>
              <description>Enable or disable interrupt for RXSTARTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXSTARTED</name>
              <description>Enable or disable interrupt for TXSTARTED event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WRITE</name>
              <description>Enable or disable interrupt for WRITE event</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>READ</name>
              <description>Enable or disable interrupt for READ event</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to enable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Write '1' to enable interrupt for ERROR event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXSTARTED</name>
              <description>Write '1' to enable interrupt for RXSTARTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXSTARTED</name>
              <description>Write '1' to enable interrupt for TXSTARTED event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WRITE</name>
              <description>Write '1' to enable interrupt for WRITE event</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>READ</name>
              <description>Write '1' to enable interrupt for READ event</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to disable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Write '1' to disable interrupt for ERROR event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXSTARTED</name>
              <description>Write '1' to disable interrupt for RXSTARTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXSTARTED</name>
              <description>Write '1' to disable interrupt for TXSTARTED event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WRITE</name>
              <description>Write '1' to disable interrupt for WRITE event</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>READ</name>
              <description>Write '1' to disable interrupt for READ event</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ERRORSRC</name>
          <description>Error source</description>
          <addressOffset>0x4D0</addressOffset>
          <access>read-write</access>
          <modifiedWriteValues>oneToClear</modifiedWriteValues>
          <fields>
            <field>
              <name>OVERFLOW</name>
              <description>RX buffer overflow detected, and prevented</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotDetected</name>
                  <description>Error did not occur</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Detected</name>
                  <description>Error occurred</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DNACK</name>
              <description>NACK sent after receiving a data byte</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotReceived</name>
                  <description>Error did not occur</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Received</name>
                  <description>Error occurred</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OVERREAD</name>
              <description>TX buffer over-read detected, and prevented</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotDetected</name>
                  <description>Error did not occur</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Detected</name>
                  <description>Error occurred</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MATCH</name>
          <description>Status register indicating which address had a match</description>
          <addressOffset>0x4D4</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>MATCH</name>
              <description>Which of the addresses in {ADDRESS} matched the incoming address</description>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Enable TWIS</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable TWIS</description>
              <lsb>0</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable TWIS</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable TWIS</description>
                  <value>9</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <name>PSEL</name>
          <description>Unspecified</description>
          <headerStructName>TWIS_PSEL</headerStructName>
          <addressOffset>0x508</addressOffset>
          <register>
            <name>SCL</name>
            <description>Pin select for SCL signal</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>SDA</name>
            <description>Pin select for SDA signal</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <name>RXD</name>
          <description>RXD EasyDMA channel</description>
          <headerStructName>TWIS_RXD</headerStructName>
          <addressOffset>0x534</addressOffset>
          <register>
            <name>PTR</name>
            <description>RXD Data pointer</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>PTR</name>
                <description>RXD Data pointer</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>MAXCNT</name>
            <description>Maximum number of bytes in RXD buffer</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>MAXCNT</name>
                <description>Maximum number of bytes in RXD buffer</description>
                <lsb>0</lsb>
                <msb>9</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>AMOUNT</name>
            <description>Number of bytes transferred in the last RXD transaction</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>AMOUNT</name>
                <description>Number of bytes transferred in the last RXD transaction</description>
                <lsb>0</lsb>
                <msb>9</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <name>TXD</name>
          <description>TXD EasyDMA channel</description>
          <headerStructName>TWIS_TXD</headerStructName>
          <addressOffset>0x544</addressOffset>
          <register>
            <name>PTR</name>
            <description>TXD Data pointer</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>PTR</name>
                <description>TXD Data pointer</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>MAXCNT</name>
            <description>Maximum number of bytes in TXD buffer</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>MAXCNT</name>
                <description>Maximum number of bytes in TXD buffer</description>
                <lsb>0</lsb>
                <msb>9</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>AMOUNT</name>
            <description>Number of bytes transferred in the last TXD transaction</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>AMOUNT</name>
                <description>Number of bytes transferred in the last TXD transaction</description>
                <lsb>0</lsb>
                <msb>9</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <dim>0x2</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>ADDRESS[%s]</name>
          <description>Description collection[n]: TWI slave address n</description>
          <addressOffset>0x588</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ADDRESS</name>
              <description>TWI slave address</description>
              <lsb>0</lsb>
              <msb>6</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>CONFIG</name>
          <description>Configuration register for the address match mechanism</description>
          <addressOffset>0x594</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>ADDRESS0</name>
              <description>Enable or disable address matching on ADDRESS[0]</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ADDRESS1</name>
              <description>Enable or disable address matching on ADDRESS[1]</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ORC</name>
          <description>Over-read character. Character sent out in case of an over-read of the transmit buffer.</description>
          <addressOffset>0x5C0</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ORC</name>
              <description>Over-read character. Character sent out in case of an over-read of the transmit buffer.</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>SPIM0</name>
      <description>Serial Peripheral Interface Master with EasyDMA</description>
      <baseAddress>0x40004000</baseAddress>
      <headerStructName>SPIM</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>SPIM0_SPIS0</name>
        <value>4</value>
      </interrupt>
      <groupName>SPIM</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>TASKS_START</name>
          <description>Start SPI transaction</description>
          <addressOffset>0x010</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_START</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stop SPI transaction</description>
          <addressOffset>0x014</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_STOP</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_SUSPEND</name>
          <description>Suspend SPI transaction</description>
          <addressOffset>0x01C</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_SUSPEND</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_RESUME</name>
          <description>Resume SPI transaction</description>
          <addressOffset>0x020</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_RESUME</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_STOPPED</name>
          <description>SPI transaction has stopped</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_STOPPED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_ENDRX</name>
          <description>End of RXD buffer reached</description>
          <addressOffset>0x110</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_ENDRX</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_END</name>
          <description>End of RXD buffer and TXD buffer reached</description>
          <addressOffset>0x118</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_END</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_ENDTX</name>
          <description>End of TXD buffer reached</description>
          <addressOffset>0x120</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_ENDTX</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_STARTED</name>
          <description>Transaction started</description>
          <addressOffset>0x14C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_STARTED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>END_START</name>
              <description>Shortcut between END event and START task</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to enable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDRX</name>
              <description>Write '1' to enable interrupt for ENDRX event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>END</name>
              <description>Write '1' to enable interrupt for END event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDTX</name>
              <description>Write '1' to enable interrupt for ENDTX event</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STARTED</name>
              <description>Write '1' to enable interrupt for STARTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to disable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDRX</name>
              <description>Write '1' to disable interrupt for ENDRX event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>END</name>
              <description>Write '1' to disable interrupt for END event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDTX</name>
              <description>Write '1' to disable interrupt for ENDTX event</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STARTED</name>
              <description>Write '1' to disable interrupt for STARTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Enable SPIM</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable SPIM</description>
              <lsb>0</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable SPIM</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable SPIM</description>
                  <value>7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <name>PSEL</name>
          <description>Unspecified</description>
          <headerStructName>SPIM_PSEL</headerStructName>
          <addressOffset>0x508</addressOffset>
          <register>
            <name>SCK</name>
            <description>Pin select for SCK</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>MOSI</name>
            <description>Pin select for MOSI signal</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>MISO</name>
            <description>Pin select for MISO signal</description>
            <addressOffset>0x008</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <name>FREQUENCY</name>
          <description>SPI frequency. Accuracy depends on the HFCLK source selected.</description>
          <addressOffset>0x524</addressOffset>
          <access>read-write</access>
          <resetValue>0x04000000</resetValue>
          <fields>
            <field>
              <name>FREQUENCY</name>
              <description>SPI master data rate</description>
              <lsb>0</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>K125</name>
                  <description>125 kbps</description>
                  <value>0x02000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>K250</name>
                  <description>250 kbps</description>
                  <value>0x04000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>K500</name>
                  <description>500 kbps</description>
                  <value>0x08000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>M1</name>
                  <description>1 Mbps</description>
                  <value>0x10000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>M2</name>
                  <description>2 Mbps</description>
                  <value>0x20000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>M4</name>
                  <description>4 Mbps</description>
                  <value>0x40000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>M8</name>
                  <description>8 Mbps</description>
                  <value>0x80000000</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <name>RXD</name>
          <description>RXD EasyDMA channel</description>
          <headerStructName>SPIM_RXD</headerStructName>
          <addressOffset>0x534</addressOffset>
          <register>
            <name>PTR</name>
            <description>Data pointer</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>PTR</name>
                <description>Data pointer</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>MAXCNT</name>
            <description>Maximum number of bytes in receive buffer</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>MAXCNT</name>
                <description>Maximum number of bytes in receive buffer</description>
                <lsb>0</lsb>
                <msb>9</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>AMOUNT</name>
            <description>Number of bytes transferred in the last transaction</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>AMOUNT</name>
                <description>Number of bytes transferred in the last transaction</description>
                <lsb>0</lsb>
                <msb>9</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>LIST</name>
            <description>EasyDMA list type</description>
            <addressOffset>0x00C</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>LIST</name>
                <description>List type</description>
                <lsb>0</lsb>
                <msb>2</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disabled</name>
                    <description>Disable EasyDMA list</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>ArrayList</name>
                    <description>Use array list</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <name>TXD</name>
          <description>TXD EasyDMA channel</description>
          <headerStructName>SPIM_TXD</headerStructName>
          <addressOffset>0x544</addressOffset>
          <register>
            <name>PTR</name>
            <description>Data pointer</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>PTR</name>
                <description>Data pointer</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>MAXCNT</name>
            <description>Maximum number of bytes in transmit buffer</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>MAXCNT</name>
                <description>Maximum number of bytes in transmit buffer</description>
                <lsb>0</lsb>
                <msb>9</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>AMOUNT</name>
            <description>Number of bytes transferred in the last transaction</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>AMOUNT</name>
                <description>Number of bytes transferred in the last transaction</description>
                <lsb>0</lsb>
                <msb>9</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>LIST</name>
            <description>EasyDMA list type</description>
            <addressOffset>0x00C</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>LIST</name>
                <description>List type</description>
                <lsb>0</lsb>
                <msb>2</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disabled</name>
                    <description>Disable EasyDMA list</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>ArrayList</name>
                    <description>Use array list</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <name>CONFIG</name>
          <description>Configuration register</description>
          <addressOffset>0x554</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ORDER</name>
              <description>Bit order</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MsbFirst</name>
                  <description>Most significant bit shifted out first</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LsbFirst</name>
                  <description>Least significant bit shifted out first</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPHA</name>
              <description>Serial clock (SCK) phase</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Leading</name>
                  <description>Sample on leading edge of clock, shift serial data on trailing edge</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Trailing</name>
                  <description>Sample on trailing edge of clock, shift serial data on leading edge</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPOL</name>
              <description>Serial clock (SCK) polarity</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ActiveHigh</name>
                  <description>Active high</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ActiveLow</name>
                  <description>Active low</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ORC</name>
          <description>Over-read character. Character clocked out in case and over-read of the TXD buffer.</description>
          <addressOffset>0x5C0</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ORC</name>
              <description>Over-read character. Character clocked out in case and over-read of the TXD buffer.</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>SPIS0</name>
      <description>SPI Slave</description>
      <baseAddress>0x40004000</baseAddress>
      <alternatePeripheral>SPIM0</alternatePeripheral>
      <headerStructName>SPIS</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>SPIM0_SPIS0</name>
        <value>4</value>
      </interrupt>
      <groupName>SPIS</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>TASKS_ACQUIRE</name>
          <description>Acquire SPI semaphore</description>
          <addressOffset>0x024</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_ACQUIRE</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_RELEASE</name>
          <description>Release SPI semaphore, enabling the SPI slave to acquire it</description>
          <addressOffset>0x028</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_RELEASE</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_END</name>
          <description>Granted transaction completed</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_END</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_ENDRX</name>
          <description>End of RXD buffer reached</description>
          <addressOffset>0x110</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_ENDRX</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_ACQUIRED</name>
          <description>Semaphore acquired</description>
          <addressOffset>0x128</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_ACQUIRED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>END_ACQUIRE</name>
              <description>Shortcut between END event and ACQUIRE task</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>END</name>
              <description>Write '1' to enable interrupt for END event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDRX</name>
              <description>Write '1' to enable interrupt for ENDRX event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ACQUIRED</name>
              <description>Write '1' to enable interrupt for ACQUIRED event</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>END</name>
              <description>Write '1' to disable interrupt for END event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDRX</name>
              <description>Write '1' to disable interrupt for ENDRX event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ACQUIRED</name>
              <description>Write '1' to disable interrupt for ACQUIRED event</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SEMSTAT</name>
          <description>Semaphore status register</description>
          <addressOffset>0x400</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>SEMSTAT</name>
              <description>Semaphore status</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Free</name>
                  <description>Semaphore is free</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CPU</name>
                  <description>Semaphore is assigned to CPU</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPIS</name>
                  <description>Semaphore is assigned to SPI slave</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CPUPending</name>
                  <description>Semaphore is assigned to SPI but a handover to the CPU is pending</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>STATUS</name>
          <description>Status from last transaction</description>
          <addressOffset>0x440</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>OVERREAD</name>
              <description>TX buffer over-read detected, and prevented</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>NotPresent</name>
                  <description>Read: error not present</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Present</name>
                  <description>Read: error present</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: clear error on writing '1'</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OVERFLOW</name>
              <description>RX buffer overflow detected, and prevented</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>NotPresent</name>
                  <description>Read: error not present</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Present</name>
                  <description>Read: error present</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: clear error on writing '1'</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Enable SPI slave</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable SPI slave</description>
              <lsb>0</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable SPI slave</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable SPI slave</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <name>PSEL</name>
          <description>Unspecified</description>
          <headerStructName>SPIS_PSEL</headerStructName>
          <addressOffset>0x508</addressOffset>
          <register>
            <name>SCK</name>
            <description>Pin select for SCK</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>MISO</name>
            <description>Pin select for MISO signal</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>MOSI</name>
            <description>Pin select for MOSI signal</description>
            <addressOffset>0x008</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>CSN</name>
            <description>Pin select for CSN signal</description>
            <addressOffset>0x00C</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <name>RXD</name>
          <description>Unspecified</description>
          <headerStructName>SPIS_RXD</headerStructName>
          <addressOffset>0x534</addressOffset>
          <register>
            <name>PTR</name>
            <description>RXD data pointer</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>PTR</name>
                <description>RXD data pointer</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>MAXCNT</name>
            <description>Maximum number of bytes in receive buffer</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>MAXCNT</name>
                <description>Maximum number of bytes in receive buffer</description>
                <lsb>0</lsb>
                <msb>9</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>AMOUNT</name>
            <description>Number of bytes received in last granted transaction</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>AMOUNT</name>
                <description>Number of bytes received in the last granted transaction</description>
                <lsb>0</lsb>
                <msb>9</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <name>TXD</name>
          <description>Unspecified</description>
          <headerStructName>SPIS_TXD</headerStructName>
          <addressOffset>0x544</addressOffset>
          <register>
            <name>PTR</name>
            <description>TXD data pointer</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>PTR</name>
                <description>TXD data pointer</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>MAXCNT</name>
            <description>Maximum number of bytes in transmit buffer</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>MAXCNT</name>
                <description>Maximum number of bytes in transmit buffer</description>
                <lsb>0</lsb>
                <msb>9</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>AMOUNT</name>
            <description>Number of bytes transmitted in last granted transaction</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>AMOUNT</name>
                <description>Number of bytes transmitted in last granted transaction</description>
                <lsb>0</lsb>
                <msb>9</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <name>CONFIG</name>
          <description>Configuration register</description>
          <addressOffset>0x554</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ORDER</name>
              <description>Bit order</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MsbFirst</name>
                  <description>Most significant bit shifted out first</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LsbFirst</name>
                  <description>Least significant bit shifted out first</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPHA</name>
              <description>Serial clock (SCK) phase</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Leading</name>
                  <description>Sample on leading edge of clock, shift serial data on trailing edge</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Trailing</name>
                  <description>Sample on trailing edge of clock, shift serial data on leading edge</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPOL</name>
              <description>Serial clock (SCK) polarity</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ActiveHigh</name>
                  <description>Active high</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ActiveLow</name>
                  <description>Active low</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>DEF</name>
          <description>Default character. Character clocked out in case of an ignored transaction.</description>
          <addressOffset>0x55C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>DEF</name>
              <description>Default character. Character clocked out in case of an ignored transaction.</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>ORC</name>
          <description>Over-read character</description>
          <addressOffset>0x5C0</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ORC</name>
              <description>Over-read character. Character clocked out after an over-read of the transmit buffer.</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>GPIOTE</name>
      <description>GPIO Tasks and Events</description>
      <baseAddress>0x40006000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>GPIOTE</name>
        <value>6</value>
      </interrupt>
      <groupName>GPIOTE</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <dim>0x8</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>TASKS_OUT[%s]</name>
          <description>Description collection[n]: Task for writing to pin specified in CONFIG[n].PSEL. Action on pin is configured in CONFIG[n].POLARITY.</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_OUT</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>0x8</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>TASKS_SET[%s]</name>
          <description>Description collection[n]: Task for writing to pin specified in CONFIG[n].PSEL. Action on pin is to set it high.</description>
          <addressOffset>0x030</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_SET</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>0x8</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>TASKS_CLR[%s]</name>
          <description>Description collection[n]: Task for writing to pin specified in CONFIG[n].PSEL. Action on pin is to set it low.</description>
          <addressOffset>0x060</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_CLR</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>0x8</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>EVENTS_IN[%s]</name>
          <description>Description collection[n]: Event generated from pin specified in CONFIG[n].PSEL</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_IN</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_PORT</name>
          <description>Event generated from multiple input GPIO pins with SENSE mechanism enabled</description>
          <addressOffset>0x17C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_PORT</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>IN0</name>
              <description>Write '1' to enable interrupt for IN[0] event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN1</name>
              <description>Write '1' to enable interrupt for IN[1] event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN2</name>
              <description>Write '1' to enable interrupt for IN[2] event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN3</name>
              <description>Write '1' to enable interrupt for IN[3] event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN4</name>
              <description>Write '1' to enable interrupt for IN[4] event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN5</name>
              <description>Write '1' to enable interrupt for IN[5] event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN6</name>
              <description>Write '1' to enable interrupt for IN[6] event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN7</name>
              <description>Write '1' to enable interrupt for IN[7] event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PORT</name>
              <description>Write '1' to enable interrupt for PORT event</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>IN0</name>
              <description>Write '1' to disable interrupt for IN[0] event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN1</name>
              <description>Write '1' to disable interrupt for IN[1] event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN2</name>
              <description>Write '1' to disable interrupt for IN[2] event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN3</name>
              <description>Write '1' to disable interrupt for IN[3] event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN4</name>
              <description>Write '1' to disable interrupt for IN[4] event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN5</name>
              <description>Write '1' to disable interrupt for IN[5] event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN6</name>
              <description>Write '1' to disable interrupt for IN[6] event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN7</name>
              <description>Write '1' to disable interrupt for IN[7] event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PORT</name>
              <description>Write '1' to disable interrupt for PORT event</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <dim>0x8</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>CONFIG[%s]</name>
          <description>Description collection[n]: Configuration for OUT[n], SET[n] and CLR[n] tasks and IN[n] event</description>
          <addressOffset>0x510</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>MODE</name>
              <description>Mode</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled. Pin specified by PSEL will not be acquired by the GPIOTE module.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Event</name>
                  <description>Event mode</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Task</name>
                  <description>Task mode</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PSEL</name>
              <description>GPIO number associated with SET[n], CLR[n] and OUT[n] tasks and IN[n] event</description>
              <lsb>8</lsb>
              <msb>12</msb>
            </field>
            <field>
              <name>POLARITY</name>
              <description>When In task mode: Operation to be performed on output when OUT[n] task is triggered. When In event mode: Operation on input that shall trigger IN[n] event.</description>
              <lsb>16</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>None</name>
                  <description>Task mode: No effect on pin from OUT[n] task. Event mode: no IN[n] event generated on pin activity.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LoToHi</name>
                  <description>Task mode: Set pin from OUT[n] task. Event mode: Generate IN[n] event when rising edge on pin.</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HiToLo</name>
                  <description>Task mode: Clear pin from OUT[n] task. Event mode: Generate IN[n] event when falling edge on pin.</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Toggle</name>
                  <description>Task mode: Toggle pin from OUT[n]. Event mode: Generate IN[n] when any change on pin.</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OUTINIT</name>
              <description>When in task mode: Initial value of the output when the GPIOTE channel is configured. When in event mode: No effect.</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Task mode: Initial value of pin before task triggering is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Task mode: Initial value of pin before task triggering is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>SAADC</name>
      <description>Analog to Digital Converter</description>
      <baseAddress>0x40007000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>SAADC</name>
        <value>7</value>
      </interrupt>
      <groupName>SAADC</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>TASKS_START</name>
          <description>Start the ADC and prepare the result buffer in RAM</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_START</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_SAMPLE</name>
          <description>Take one ADC sample, if scan is enabled all channels are sampled</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_SAMPLE</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stop the ADC and terminate any on-going conversion</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_STOP</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_CALIBRATEOFFSET</name>
          <description>Starts offset auto-calibration</description>
          <addressOffset>0x00C</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_CALIBRATEOFFSET</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_STARTED</name>
          <description>The ADC has started</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_STARTED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_END</name>
          <description>The ADC has filled up the Result buffer</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_END</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_DONE</name>
          <description>A conversion task has been completed. Depending on the mode, multiple conversions might be needed for a result to be transferred to RAM.</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_DONE</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_RESULTDONE</name>
          <description>A result is ready to get transferred to RAM.</description>
          <addressOffset>0x10C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_RESULTDONE</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_CALIBRATEDONE</name>
          <description>Calibration is complete</description>
          <addressOffset>0x110</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_CALIBRATEDONE</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_STOPPED</name>
          <description>The ADC has stopped</description>
          <addressOffset>0x114</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_STOPPED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <cluster>
          <dim>8</dim>
          <dimIncrement>0x008</dimIncrement>
          <name>EVENTS_CH[%s]</name>
          <description>Unspecified</description>
          <headerStructName>SAADC_EVENTS_CH</headerStructName>
          <addressOffset>0x118</addressOffset>
          <register>
            <name>LIMITH</name>
            <description>Description cluster[n]: Last results is equal or above CH[n].LIMIT.HIGH</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>LIMITH</name>
                <lsb>0</lsb>
                <msb>0</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>LIMITL</name>
            <description>Description cluster[n]: Last results is equal or below CH[n].LIMIT.LOW</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>LIMITL</name>
                <lsb>0</lsb>
                <msb>0</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <name>INTEN</name>
          <description>Enable or disable interrupt</description>
          <addressOffset>0x300</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STARTED</name>
              <description>Enable or disable interrupt for STARTED event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>END</name>
              <description>Enable or disable interrupt for END event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DONE</name>
              <description>Enable or disable interrupt for DONE event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RESULTDONE</name>
              <description>Enable or disable interrupt for RESULTDONE event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CALIBRATEDONE</name>
              <description>Enable or disable interrupt for CALIBRATEDONE event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STOPPED</name>
              <description>Enable or disable interrupt for STOPPED event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH0LIMITH</name>
              <description>Enable or disable interrupt for CH[0].LIMITH event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH0LIMITL</name>
              <description>Enable or disable interrupt for CH[0].LIMITL event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH1LIMITH</name>
              <description>Enable or disable interrupt for CH[1].LIMITH event</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH1LIMITL</name>
              <description>Enable or disable interrupt for CH[1].LIMITL event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH2LIMITH</name>
              <description>Enable or disable interrupt for CH[2].LIMITH event</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH2LIMITL</name>
              <description>Enable or disable interrupt for CH[2].LIMITL event</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH3LIMITH</name>
              <description>Enable or disable interrupt for CH[3].LIMITH event</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH3LIMITL</name>
              <description>Enable or disable interrupt for CH[3].LIMITL event</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH4LIMITH</name>
              <description>Enable or disable interrupt for CH[4].LIMITH event</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH4LIMITL</name>
              <description>Enable or disable interrupt for CH[4].LIMITL event</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH5LIMITH</name>
              <description>Enable or disable interrupt for CH[5].LIMITH event</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH5LIMITL</name>
              <description>Enable or disable interrupt for CH[5].LIMITL event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH6LIMITH</name>
              <description>Enable or disable interrupt for CH[6].LIMITH event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH6LIMITL</name>
              <description>Enable or disable interrupt for CH[6].LIMITL event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH7LIMITH</name>
              <description>Enable or disable interrupt for CH[7].LIMITH event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH7LIMITL</name>
              <description>Enable or disable interrupt for CH[7].LIMITL event</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STARTED</name>
              <description>Write '1' to enable interrupt for STARTED event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>END</name>
              <description>Write '1' to enable interrupt for END event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DONE</name>
              <description>Write '1' to enable interrupt for DONE event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RESULTDONE</name>
              <description>Write '1' to enable interrupt for RESULTDONE event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CALIBRATEDONE</name>
              <description>Write '1' to enable interrupt for CALIBRATEDONE event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to enable interrupt for STOPPED event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH0LIMITH</name>
              <description>Write '1' to enable interrupt for CH[0].LIMITH event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH0LIMITL</name>
              <description>Write '1' to enable interrupt for CH[0].LIMITL event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH1LIMITH</name>
              <description>Write '1' to enable interrupt for CH[1].LIMITH event</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH1LIMITL</name>
              <description>Write '1' to enable interrupt for CH[1].LIMITL event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH2LIMITH</name>
              <description>Write '1' to enable interrupt for CH[2].LIMITH event</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH2LIMITL</name>
              <description>Write '1' to enable interrupt for CH[2].LIMITL event</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH3LIMITH</name>
              <description>Write '1' to enable interrupt for CH[3].LIMITH event</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH3LIMITL</name>
              <description>Write '1' to enable interrupt for CH[3].LIMITL event</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH4LIMITH</name>
              <description>Write '1' to enable interrupt for CH[4].LIMITH event</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH4LIMITL</name>
              <description>Write '1' to enable interrupt for CH[4].LIMITL event</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH5LIMITH</name>
              <description>Write '1' to enable interrupt for CH[5].LIMITH event</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH5LIMITL</name>
              <description>Write '1' to enable interrupt for CH[5].LIMITL event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH6LIMITH</name>
              <description>Write '1' to enable interrupt for CH[6].LIMITH event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH6LIMITL</name>
              <description>Write '1' to enable interrupt for CH[6].LIMITL event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH7LIMITH</name>
              <description>Write '1' to enable interrupt for CH[7].LIMITH event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH7LIMITL</name>
              <description>Write '1' to enable interrupt for CH[7].LIMITL event</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STARTED</name>
              <description>Write '1' to disable interrupt for STARTED event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>END</name>
              <description>Write '1' to disable interrupt for END event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DONE</name>
              <description>Write '1' to disable interrupt for DONE event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RESULTDONE</name>
              <description>Write '1' to disable interrupt for RESULTDONE event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CALIBRATEDONE</name>
              <description>Write '1' to disable interrupt for CALIBRATEDONE event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to disable interrupt for STOPPED event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH0LIMITH</name>
              <description>Write '1' to disable interrupt for CH[0].LIMITH event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH0LIMITL</name>
              <description>Write '1' to disable interrupt for CH[0].LIMITL event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH1LIMITH</name>
              <description>Write '1' to disable interrupt for CH[1].LIMITH event</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH1LIMITL</name>
              <description>Write '1' to disable interrupt for CH[1].LIMITL event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH2LIMITH</name>
              <description>Write '1' to disable interrupt for CH[2].LIMITH event</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH2LIMITL</name>
              <description>Write '1' to disable interrupt for CH[2].LIMITL event</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH3LIMITH</name>
              <description>Write '1' to disable interrupt for CH[3].LIMITH event</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH3LIMITL</name>
              <description>Write '1' to disable interrupt for CH[3].LIMITL event</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH4LIMITH</name>
              <description>Write '1' to disable interrupt for CH[4].LIMITH event</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH4LIMITL</name>
              <description>Write '1' to disable interrupt for CH[4].LIMITL event</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH5LIMITH</name>
              <description>Write '1' to disable interrupt for CH[5].LIMITH event</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH5LIMITL</name>
              <description>Write '1' to disable interrupt for CH[5].LIMITL event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH6LIMITH</name>
              <description>Write '1' to disable interrupt for CH[6].LIMITH event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH6LIMITL</name>
              <description>Write '1' to disable interrupt for CH[6].LIMITL event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH7LIMITH</name>
              <description>Write '1' to disable interrupt for CH[7].LIMITH event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH7LIMITL</name>
              <description>Write '1' to disable interrupt for CH[7].LIMITL event</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>STATUS</name>
          <description>Status</description>
          <addressOffset>0x400</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>STATUS</name>
              <description>Status</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Ready</name>
                  <description>ADC is ready. No on-going conversion.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Busy</name>
                  <description>ADC is busy. Conversion in progress.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Enable or disable ADC</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable ADC</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable ADC</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable ADC</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <dim>8</dim>
          <dimIncrement>0x010</dimIncrement>
          <name>CH[%s]</name>
          <description>Unspecified</description>
          <headerStructName>SAADC_CH</headerStructName>
          <addressOffset>0x510</addressOffset>
          <register>
            <name>PSELP</name>
            <description>Description cluster[n]: Input positive pin selection for CH[n]</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000000</resetValue>
            <fields>
              <field>
                <name>PSELP</name>
                <description>Analog positive input channel</description>
                <lsb>0</lsb>
                <msb>4</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NC</name>
                    <description>Not connected</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput0</name>
                    <description>AIN0</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput1</name>
                    <description>AIN1</description>
                    <value>2</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput2</name>
                    <description>AIN2</description>
                    <value>3</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput3</name>
                    <description>AIN3</description>
                    <value>4</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput4</name>
                    <description>AIN4</description>
                    <value>5</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput5</name>
                    <description>AIN5</description>
                    <value>6</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput6</name>
                    <description>AIN6</description>
                    <value>7</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput7</name>
                    <description>AIN7</description>
                    <value>8</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>VDD</name>
                    <description>VDD</description>
                    <value>9</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>PSELN</name>
            <description>Description cluster[n]: Input negative pin selection for CH[n]</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000000</resetValue>
            <fields>
              <field>
                <name>PSELN</name>
                <description>Analog negative input, enables differential channel</description>
                <lsb>0</lsb>
                <msb>4</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NC</name>
                    <description>Not connected</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput0</name>
                    <description>AIN0</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput1</name>
                    <description>AIN1</description>
                    <value>2</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput2</name>
                    <description>AIN2</description>
                    <value>3</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput3</name>
                    <description>AIN3</description>
                    <value>4</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput4</name>
                    <description>AIN4</description>
                    <value>5</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput5</name>
                    <description>AIN5</description>
                    <value>6</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput6</name>
                    <description>AIN6</description>
                    <value>7</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput7</name>
                    <description>AIN7</description>
                    <value>8</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>VDD</name>
                    <description>VDD</description>
                    <value>9</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>CONFIG</name>
            <description>Description cluster[n]: Input configuration for CH[n]</description>
            <addressOffset>0x008</addressOffset>
            <access>read-write</access>
            <resetValue>0x00020000</resetValue>
            <fields>
              <field>
                <name>RESP</name>
                <description>Positive channel resistor control</description>
                <lsb>0</lsb>
                <msb>1</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Bypass</name>
                    <description>Bypass resistor ladder</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Pulldown</name>
                    <description>Pull-down to GND</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Pullup</name>
                    <description>Pull-up to VDD</description>
                    <value>2</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>VDD1_2</name>
                    <description>Set input at VDD/2</description>
                    <value>3</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>RESN</name>
                <description>Negative channel resistor control</description>
                <lsb>4</lsb>
                <msb>5</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Bypass</name>
                    <description>Bypass resistor ladder</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Pulldown</name>
                    <description>Pull-down to GND</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Pullup</name>
                    <description>Pull-up to VDD</description>
                    <value>2</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>VDD1_2</name>
                    <description>Set input at VDD/2</description>
                    <value>3</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>GAIN</name>
                <description>Gain control</description>
                <lsb>8</lsb>
                <msb>10</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Gain1_6</name>
                    <description>1/6</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Gain1_5</name>
                    <description>1/5</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Gain1_4</name>
                    <description>1/4</description>
                    <value>2</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Gain1_3</name>
                    <description>1/3</description>
                    <value>3</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Gain1_2</name>
                    <description>1/2</description>
                    <value>4</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Gain1</name>
                    <description>1</description>
                    <value>5</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Gain2</name>
                    <description>2</description>
                    <value>6</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Gain4</name>
                    <description>4</description>
                    <value>7</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>REFSEL</name>
                <description>Reference control</description>
                <lsb>12</lsb>
                <msb>12</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Internal</name>
                    <description>Internal reference (0.6 V)</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>VDD1_4</name>
                    <description>VDD/4 as reference</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>TACQ</name>
                <description>Acquisition time, the time the ADC uses to sample the input voltage</description>
                <lsb>16</lsb>
                <msb>18</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>3us</name>
                    <description>3 us</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>5us</name>
                    <description>5 us</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>10us</name>
                    <description>10 us</description>
                    <value>2</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>15us</name>
                    <description>15 us</description>
                    <value>3</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>20us</name>
                    <description>20 us</description>
                    <value>4</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>40us</name>
                    <description>40 us</description>
                    <value>5</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>MODE</name>
                <description>Enable differential mode</description>
                <lsb>20</lsb>
                <msb>20</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>SE</name>
                    <description>Single ended, PSELN will be ignored, negative input to ADC shorted to GND</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Diff</name>
                    <description>Differential</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>BURST</name>
                <description>Enable burst mode</description>
                <lsb>24</lsb>
                <msb>24</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disabled</name>
                    <description>Burst mode is disabled (normal operation)</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Enabled</name>
                    <description>Burst mode is enabled. SAADC takes 2^OVERSAMPLE number of samples as fast as it can, and sends the average to Data RAM.</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>LIMIT</name>
            <description>Description cluster[n]: High/low limits for event monitoring a channel</description>
            <addressOffset>0x00C</addressOffset>
            <access>read-write</access>
            <resetValue>0x7FFF8000</resetValue>
            <fields>
              <field>
                <name>LOW</name>
                <description>Low level limit</description>
                <lsb>0</lsb>
                <msb>15</msb>
              </field>
              <field>
                <name>HIGH</name>
                <description>High level limit</description>
                <lsb>16</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <name>RESOLUTION</name>
          <description>Resolution configuration</description>
          <addressOffset>0x5F0</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>VAL</name>
              <description>Set the resolution</description>
              <lsb>0</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>8bit</name>
                  <description>8 bit</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>10bit</name>
                  <description>10 bit</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>12bit</name>
                  <description>12 bit</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>14bit</name>
                  <description>14 bit</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>OVERSAMPLE</name>
          <description>Oversampling configuration. OVERSAMPLE should not be combined with SCAN. The RESOLUTION is applied before averaging, thus for high OVERSAMPLE a higher RESOLUTION should be used.</description>
          <addressOffset>0x5F4</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>OVERSAMPLE</name>
              <description>Oversample control</description>
              <lsb>0</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Bypass</name>
                  <description>Bypass oversampling</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Over2x</name>
                  <description>Oversample 2x</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Over4x</name>
                  <description>Oversample 4x</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Over8x</name>
                  <description>Oversample 8x</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Over16x</name>
                  <description>Oversample 16x</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Over32x</name>
                  <description>Oversample 32x</description>
                  <value>5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Over64x</name>
                  <description>Oversample 64x</description>
                  <value>6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Over128x</name>
                  <description>Oversample 128x</description>
                  <value>7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Over256x</name>
                  <description>Oversample 256x</description>
                  <value>8</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SAMPLERATE</name>
          <description>Controls normal or continuous sample rate</description>
          <addressOffset>0x5F8</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>CC</name>
              <description>Capture and compare value. Sample rate is 16 MHz/CC</description>
              <lsb>0</lsb>
              <msb>10</msb>
            </field>
            <field>
              <name>MODE</name>
              <description>Select mode for sample rate control</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Task</name>
                  <description>Rate is controlled from SAMPLE task</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Timers</name>
                  <description>Rate is controlled from local timer (use CC to control the rate)</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <name>RESULT</name>
          <description>RESULT EasyDMA channel</description>
          <headerStructName>SAADC_RESULT</headerStructName>
          <addressOffset>0x62C</addressOffset>
          <register>
            <name>PTR</name>
            <description>Data pointer</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>PTR</name>
                <description>Data pointer</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>MAXCNT</name>
            <description>Maximum number of buffer words to transfer</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>MAXCNT</name>
                <description>Maximum number of buffer words to transfer</description>
                <lsb>0</lsb>
                <msb>14</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>AMOUNT</name>
            <description>Number of buffer words transferred since last START</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>AMOUNT</name>
                <description>Number of buffer words transferred since last START. This register can be read after an END or STOPPED event.</description>
                <lsb>0</lsb>
                <msb>14</msb>
              </field>
            </fields>
          </register>
        </cluster>
      </registers>
    </peripheral>
    <peripheral>
      <name>TIMER0</name>
      <description>Timer/Counter 0</description>
      <baseAddress>0x40008000</baseAddress>
      <headerStructName>TIMER</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>TIMER0</name>
        <value>8</value>
      </interrupt>
      <groupName>TIMER</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>TASKS_START</name>
          <description>Start Timer</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_START</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stop Timer</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_STOP</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_COUNT</name>
          <description>Increment Timer (Counter mode only)</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_COUNT</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_CLEAR</name>
          <description>Clear time</description>
          <addressOffset>0x00C</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_CLEAR</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_SHUTDOWN</name>
          <description>Deprecated register - Shut down timer</description>
          <addressOffset>0x010</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_SHUTDOWN</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>0x6</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>TASKS_CAPTURE[%s]</name>
          <description>Description collection[n]: Capture Timer value to CC[n] register</description>
          <addressOffset>0x040</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_CAPTURE</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>0x6</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>EVENTS_COMPARE[%s]</name>
          <description>Description collection[n]: Compare event on CC[n] match</description>
          <addressOffset>0x140</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_COMPARE</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>COMPARE0_CLEAR</name>
              <description>Shortcut between COMPARE[0] event and CLEAR task</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE1_CLEAR</name>
              <description>Shortcut between COMPARE[1] event and CLEAR task</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE2_CLEAR</name>
              <description>Shortcut between COMPARE[2] event and CLEAR task</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE3_CLEAR</name>
              <description>Shortcut between COMPARE[3] event and CLEAR task</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE4_CLEAR</name>
              <description>Shortcut between COMPARE[4] event and CLEAR task</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE5_CLEAR</name>
              <description>Shortcut between COMPARE[5] event and CLEAR task</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE0_STOP</name>
              <description>Shortcut between COMPARE[0] event and STOP task</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE1_STOP</name>
              <description>Shortcut between COMPARE[1] event and STOP task</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE2_STOP</name>
              <description>Shortcut between COMPARE[2] event and STOP task</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE3_STOP</name>
              <description>Shortcut between COMPARE[3] event and STOP task</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE4_STOP</name>
              <description>Shortcut between COMPARE[4] event and STOP task</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE5_STOP</name>
              <description>Shortcut between COMPARE[5] event and STOP task</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>COMPARE0</name>
              <description>Write '1' to enable interrupt for COMPARE[0] event</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE1</name>
              <description>Write '1' to enable interrupt for COMPARE[1] event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE2</name>
              <description>Write '1' to enable interrupt for COMPARE[2] event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE3</name>
              <description>Write '1' to enable interrupt for COMPARE[3] event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE4</name>
              <description>Write '1' to enable interrupt for COMPARE[4] event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE5</name>
              <description>Write '1' to enable interrupt for COMPARE[5] event</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>COMPARE0</name>
              <description>Write '1' to disable interrupt for COMPARE[0] event</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE1</name>
              <description>Write '1' to disable interrupt for COMPARE[1] event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE2</name>
              <description>Write '1' to disable interrupt for COMPARE[2] event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE3</name>
              <description>Write '1' to disable interrupt for COMPARE[3] event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE4</name>
              <description>Write '1' to disable interrupt for COMPARE[4] event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE5</name>
              <description>Write '1' to disable interrupt for COMPARE[5] event</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE</name>
          <description>Timer mode selection</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>MODE</name>
              <description>Timer mode</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Timer</name>
                  <description>Select Timer mode</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Counter</name>
                  <description>Deprecated enumerator -  Select Counter mode</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LowPowerCounter</name>
                  <description>Select Low Power Counter mode</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>BITMODE</name>
          <description>Configure the number of bits used by the TIMER</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>BITMODE</name>
              <description>Timer bit width</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>16Bit</name>
                  <description>16 bit timer bit width</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>08Bit</name>
                  <description>8 bit timer bit width</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>24Bit</name>
                  <description>24 bit timer bit width</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>32Bit</name>
                  <description>32 bit timer bit width</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>PRESCALER</name>
          <description>Timer prescaler register</description>
          <addressOffset>0x510</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000004</resetValue>
          <fields>
            <field>
              <name>PRESCALER</name>
              <description>Prescaler value</description>
              <lsb>0</lsb>
              <msb>3</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>0x6</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>CC[%s]</name>
          <description>Description collection[n]: Capture/Compare register n</description>
          <addressOffset>0x540</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>CC</name>
              <description>Capture/Compare value</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral derivedFrom="TIMER0">
      <name>TIMER1</name>
      <description>Timer/Counter 1</description>
      <baseAddress>0x40009000</baseAddress>
      <interrupt>
        <name>TIMER1</name>
        <value>9</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="TIMER0">
      <name>TIMER2</name>
      <description>Timer/Counter 2</description>
      <baseAddress>0x4000A000</baseAddress>
      <interrupt>
        <name>TIMER2</name>
        <value>10</value>
      </interrupt>
    </peripheral>
    <peripheral>
      <name>RTC0</name>
      <description>Real time counter 0</description>
      <baseAddress>0x4000B000</baseAddress>
      <headerStructName>RTC</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>RTC0</name>
        <value>11</value>
      </interrupt>
      <groupName>RTC</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>TASKS_START</name>
          <description>Start RTC COUNTER</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_START</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stop RTC COUNTER</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_STOP</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_CLEAR</name>
          <description>Clear RTC COUNTER</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_CLEAR</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_TRIGOVRFLW</name>
          <description>Set COUNTER to 0xFFFFF0</description>
          <addressOffset>0x00C</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_TRIGOVRFLW</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_TICK</name>
          <description>Event on COUNTER increment</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_TICK</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_OVRFLW</name>
          <description>Event on COUNTER overflow</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_OVRFLW</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>0x4</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>EVENTS_COMPARE[%s]</name>
          <description>Description collection[n]: Compare event on CC[n] match</description>
          <addressOffset>0x140</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_COMPARE</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TICK</name>
              <description>Write '1' to enable interrupt for TICK event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OVRFLW</name>
              <description>Write '1' to enable interrupt for OVRFLW event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE0</name>
              <description>Write '1' to enable interrupt for COMPARE[0] event</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE1</name>
              <description>Write '1' to enable interrupt for COMPARE[1] event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE2</name>
              <description>Write '1' to enable interrupt for COMPARE[2] event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE3</name>
              <description>Write '1' to enable interrupt for COMPARE[3] event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TICK</name>
              <description>Write '1' to disable interrupt for TICK event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OVRFLW</name>
              <description>Write '1' to disable interrupt for OVRFLW event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE0</name>
              <description>Write '1' to disable interrupt for COMPARE[0] event</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE1</name>
              <description>Write '1' to disable interrupt for COMPARE[1] event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE2</name>
              <description>Write '1' to disable interrupt for COMPARE[2] event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE3</name>
              <description>Write '1' to disable interrupt for COMPARE[3] event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>EVTEN</name>
          <description>Enable or disable event routing</description>
          <addressOffset>0x340</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TICK</name>
              <description>Enable or disable event routing for TICK event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OVRFLW</name>
              <description>Enable or disable event routing for OVRFLW event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE0</name>
              <description>Enable or disable event routing for COMPARE[0] event</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE1</name>
              <description>Enable or disable event routing for COMPARE[1] event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE2</name>
              <description>Enable or disable event routing for COMPARE[2] event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE3</name>
              <description>Enable or disable event routing for COMPARE[3] event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>EVTENSET</name>
          <description>Enable event routing</description>
          <addressOffset>0x344</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TICK</name>
              <description>Write '1' to enable event routing for TICK event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OVRFLW</name>
              <description>Write '1' to enable event routing for OVRFLW event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE0</name>
              <description>Write '1' to enable event routing for COMPARE[0] event</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE1</name>
              <description>Write '1' to enable event routing for COMPARE[1] event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE2</name>
              <description>Write '1' to enable event routing for COMPARE[2] event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE3</name>
              <description>Write '1' to enable event routing for COMPARE[3] event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>EVTENCLR</name>
          <description>Disable event routing</description>
          <addressOffset>0x348</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TICK</name>
              <description>Write '1' to disable event routing for TICK event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OVRFLW</name>
              <description>Write '1' to disable event routing for OVRFLW event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE0</name>
              <description>Write '1' to disable event routing for COMPARE[0] event</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE1</name>
              <description>Write '1' to disable event routing for COMPARE[1] event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE2</name>
              <description>Write '1' to disable event routing for COMPARE[2] event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE3</name>
              <description>Write '1' to disable event routing for COMPARE[3] event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>COUNTER</name>
          <description>Current COUNTER value</description>
          <addressOffset>0x504</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>COUNTER</name>
              <description>Counter value</description>
              <lsb>0</lsb>
              <msb>23</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>PRESCALER</name>
          <description>12 bit prescaler for COUNTER frequency (32768/(PRESCALER+1)).Must be written when RTC is stopped</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>PRESCALER</name>
              <description>Prescaler value</description>
              <lsb>0</lsb>
              <msb>11</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>0x4</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>CC[%s]</name>
          <description>Description collection[n]: Compare register n</description>
          <addressOffset>0x540</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>COMPARE</name>
              <description>Compare value</description>
              <lsb>0</lsb>
              <msb>23</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>TEMP</name>
      <description>Temperature Sensor</description>
      <baseAddress>0x4000C000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>TEMP</name>
        <value>12</value>
      </interrupt>
      <groupName>TEMP</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>TASKS_START</name>
          <description>Start temperature measurement</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_START</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stop temperature measurement</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_STOP</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_DATARDY</name>
          <description>Temperature measurement complete, data ready</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_DATARDY</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>DATARDY</name>
              <description>Write '1' to enable interrupt for DATARDY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>DATARDY</name>
              <description>Write '1' to disable interrupt for DATARDY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>TEMP</name>
          <description>Temperature in degC (0.25deg steps)</description>
          <addressOffset>0x508</addressOffset>
          <access>read-only</access>
          <dataType>int32_t</dataType>
          <fields>
            <field>
              <name>TEMP</name>
              <description>Temperature in degC (0.25deg steps)</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>A0</name>
          <description>Slope of 1st piece wise linear function</description>
          <addressOffset>0x520</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000326</resetValue>
          <fields>
            <field>
              <name>A0</name>
              <description>Slope of 1st piece wise linear function</description>
              <lsb>0</lsb>
              <msb>11</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>A1</name>
          <description>Slope of 2nd piece wise linear function</description>
          <addressOffset>0x524</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000348</resetValue>
          <fields>
            <field>
              <name>A1</name>
              <description>Slope of 2nd piece wise linear function</description>
              <lsb>0</lsb>
              <msb>11</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>A2</name>
          <description>Slope of 3rd piece wise linear function</description>
          <addressOffset>0x528</addressOffset>
          <access>read-write</access>
          <resetValue>0x000003AA</resetValue>
          <fields>
            <field>
              <name>A2</name>
              <description>Slope of 3rd piece wise linear function</description>
              <lsb>0</lsb>
              <msb>11</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>A3</name>
          <description>Slope of 4th piece wise linear function</description>
          <addressOffset>0x52C</addressOffset>
          <access>read-write</access>
          <resetValue>0x0000040E</resetValue>
          <fields>
            <field>
              <name>A3</name>
              <description>Slope of 4th piece wise linear function</description>
              <lsb>0</lsb>
              <msb>11</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>A4</name>
          <description>Slope of 5th piece wise linear function</description>
          <addressOffset>0x530</addressOffset>
          <access>read-write</access>
          <resetValue>0x000004BD</resetValue>
          <fields>
            <field>
              <name>A4</name>
              <description>Slope of 5th piece wise linear function</description>
              <lsb>0</lsb>
              <msb>11</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>A5</name>
          <description>Slope of 6th piece wise linear function</description>
          <addressOffset>0x534</addressOffset>
          <access>read-write</access>
          <resetValue>0x000005A3</resetValue>
          <fields>
            <field>
              <name>A5</name>
              <description>Slope of 6th piece wise linear function</description>
              <lsb>0</lsb>
              <msb>11</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>B0</name>
          <description>y-intercept of 1st piece wise linear function</description>
          <addressOffset>0x540</addressOffset>
          <access>read-write</access>
          <resetValue>0x00003FEF</resetValue>
          <fields>
            <field>
              <name>B0</name>
              <description>y-intercept of 1st piece wise linear function</description>
              <lsb>0</lsb>
              <msb>13</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>B1</name>
          <description>y-intercept of 2nd piece wise linear function</description>
          <addressOffset>0x544</addressOffset>
          <access>read-write</access>
          <resetValue>0x00003FBE</resetValue>
          <fields>
            <field>
              <name>B1</name>
              <description>y-intercept of 2nd piece wise linear function</description>
              <lsb>0</lsb>
              <msb>13</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>B2</name>
          <description>y-intercept of 3rd piece wise linear function</description>
          <addressOffset>0x548</addressOffset>
          <access>read-write</access>
          <resetValue>0x00003FBE</resetValue>
          <fields>
            <field>
              <name>B2</name>
              <description>y-intercept of 3rd piece wise linear function</description>
              <lsb>0</lsb>
              <msb>13</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>B3</name>
          <description>y-intercept of 4th piece wise linear function</description>
          <addressOffset>0x54C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000012</resetValue>
          <fields>
            <field>
              <name>B3</name>
              <description>y-intercept of 4th piece wise linear function</description>
              <lsb>0</lsb>
              <msb>13</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>B4</name>
          <description>y-intercept of 5th piece wise linear function</description>
          <addressOffset>0x550</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000124</resetValue>
          <fields>
            <field>
              <name>B4</name>
              <description>y-intercept of 5th piece wise linear function</description>
              <lsb>0</lsb>
              <msb>13</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>B5</name>
          <description>y-intercept of 6th piece wise linear function</description>
          <addressOffset>0x554</addressOffset>
          <access>read-write</access>
          <resetValue>0x0000027C</resetValue>
          <fields>
            <field>
              <name>B5</name>
              <description>y-intercept of 6th piece wise linear function</description>
              <lsb>0</lsb>
              <msb>13</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>T0</name>
          <description>End point of 1st piece wise linear function</description>
          <addressOffset>0x560</addressOffset>
          <access>read-write</access>
          <resetValue>0x000000E2</resetValue>
          <fields>
            <field>
              <name>T0</name>
              <description>End point of 1st piece wise linear function</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>T1</name>
          <description>End point of 2nd piece wise linear function</description>
          <addressOffset>0x564</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>T1</name>
              <description>End point of 2nd piece wise linear function</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>T2</name>
          <description>End point of 3rd piece wise linear function</description>
          <addressOffset>0x568</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000019</resetValue>
          <fields>
            <field>
              <name>T2</name>
              <description>End point of 3rd piece wise linear function</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>T3</name>
          <description>End point of 4th piece wise linear function</description>
          <addressOffset>0x56C</addressOffset>
          <access>read-write</access>
          <resetValue>0x0000003C</resetValue>
          <fields>
            <field>
              <name>T3</name>
              <description>End point of 4th piece wise linear function</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>T4</name>
          <description>End point of 5th piece wise linear function</description>
          <addressOffset>0x570</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000050</resetValue>
          <fields>
            <field>
              <name>T4</name>
              <description>End point of 5th piece wise linear function</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>RNG</name>
      <description>Random Number Generator</description>
      <baseAddress>0x4000D000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>RNG</name>
        <value>13</value>
      </interrupt>
      <groupName>RNG</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>TASKS_START</name>
          <description>Task starting the random number generator</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_START</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Task stopping the random number generator</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_STOP</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_VALRDY</name>
          <description>Event being generated for every new random number written to the VALUE register</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_VALRDY</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>VALRDY_STOP</name>
              <description>Shortcut between VALRDY event and STOP task</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>VALRDY</name>
              <description>Write '1' to enable interrupt for VALRDY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>VALRDY</name>
              <description>Write '1' to disable interrupt for VALRDY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CONFIG</name>
          <description>Configuration register</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>DERCEN</name>
              <description>Bias correction</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>VALUE</name>
          <description>Output random number</description>
          <addressOffset>0x508</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>VALUE</name>
              <description>Generated random number</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>ECB</name>
      <description>AES ECB Mode Encryption</description>
      <baseAddress>0x4000E000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ECB</name>
        <value>14</value>
      </interrupt>
      <groupName>ECB</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>TASKS_STARTECB</name>
          <description>Start ECB block encrypt</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_STARTECB</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_STOPECB</name>
          <description>Abort a possible executing ECB operation</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_STOPECB</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_ENDECB</name>
          <description>ECB block encrypt complete</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_ENDECB</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_ERRORECB</name>
          <description>ECB block encrypt aborted because of a STOPECB task or due to an error</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_ERRORECB</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENDECB</name>
              <description>Write '1' to enable interrupt for ENDECB event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERRORECB</name>
              <description>Write '1' to enable interrupt for ERRORECB event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENDECB</name>
              <description>Write '1' to disable interrupt for ENDECB event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERRORECB</name>
              <description>Write '1' to disable interrupt for ERRORECB event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ECBDATAPTR</name>
          <description>ECB block encrypt memory pointers</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ECBDATAPTR</name>
              <description>Pointer to the ECB data structure (see Table 1 ECB data structure overview)</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>AAR</name>
      <description>Accelerated Address Resolver</description>
      <baseAddress>0x4000F000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>CCM_AAR</name>
        <value>15</value>
      </interrupt>
      <groupName>AAR</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>TASKS_START</name>
          <description>Start resolving addresses based on IRKs specified in the IRK data structure</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_START</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stop resolving addresses</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_STOP</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_END</name>
          <description>Address resolution procedure complete</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_END</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_RESOLVED</name>
          <description>Address resolved</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_RESOLVED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_NOTRESOLVED</name>
          <description>Address not resolved</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_NOTRESOLVED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>END</name>
              <description>Write '1' to enable interrupt for END event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RESOLVED</name>
              <description>Write '1' to enable interrupt for RESOLVED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NOTRESOLVED</name>
              <description>Write '1' to enable interrupt for NOTRESOLVED event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>END</name>
              <description>Write '1' to disable interrupt for END event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RESOLVED</name>
              <description>Write '1' to disable interrupt for RESOLVED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NOTRESOLVED</name>
              <description>Write '1' to disable interrupt for NOTRESOLVED event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>STATUS</name>
          <description>Resolution status</description>
          <addressOffset>0x400</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>STATUS</name>
              <description>The IRK that was used last time an address was resolved</description>
              <lsb>0</lsb>
              <msb>3</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Enable AAR</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable AAR</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>NIRK</name>
          <description>Number of IRKs</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>NIRK</name>
              <description>Number of Identity root keys available in the IRK data structure</description>
              <lsb>0</lsb>
              <msb>4</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>IRKPTR</name>
          <description>Pointer to IRK data structure</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>IRKPTR</name>
              <description>Pointer to the IRK data structure</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>ADDRPTR</name>
          <description>Pointer to the resolvable address</description>
          <addressOffset>0x510</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ADDRPTR</name>
              <description>Pointer to the resolvable address (6-bytes)</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>SCRATCHPTR</name>
          <description>Pointer to data area used for temporary storage</description>
          <addressOffset>0x514</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>SCRATCHPTR</name>
              <description>Pointer to a scratch data area used for temporary storage during resolution.A space of minimum 3 bytes must be reserved.</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>CCM</name>
      <description>AES CCM Mode Encryption</description>
      <baseAddress>0x4000F000</baseAddress>
      <alternatePeripheral>AAR</alternatePeripheral>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>CCM_AAR</name>
        <value>15</value>
      </interrupt>
      <groupName>CCM</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>TASKS_KSGEN</name>
          <description>Start generation of key-stream. This operation will stop by itself when completed.</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_KSGEN</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_CRYPT</name>
          <description>Start encryption/decryption. This operation will stop by itself when completed.</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_CRYPT</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stop encryption/decryption</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_STOP</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_RATEOVERRIDE</name>
          <description>Override DATARATE setting in MODE register with the contents of the RATEOVERRIDE register for any ongoing encryption/decryption</description>
          <addressOffset>0x00C</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_RATEOVERRIDE</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_ENDKSGEN</name>
          <description>Key-stream generation complete</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_ENDKSGEN</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_ENDCRYPT</name>
          <description>Encrypt/decrypt complete</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_ENDCRYPT</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_ERROR</name>
          <description>Deprecated register - CCM error event</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_ERROR</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENDKSGEN_CRYPT</name>
              <description>Shortcut between ENDKSGEN event and CRYPT task</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENDKSGEN</name>
              <description>Write '1' to enable interrupt for ENDKSGEN event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDCRYPT</name>
              <description>Write '1' to enable interrupt for ENDCRYPT event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Write '1' to enable interrupt for ERROR event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENDKSGEN</name>
              <description>Write '1' to disable interrupt for ENDKSGEN event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDCRYPT</name>
              <description>Write '1' to disable interrupt for ENDCRYPT event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Write '1' to disable interrupt for ERROR event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MICSTATUS</name>
          <description>MIC check result</description>
          <addressOffset>0x400</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>MICSTATUS</name>
              <description>The result of the MIC check performed during the previous decryption operation</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CheckFailed</name>
                  <description>MIC check failed</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CheckPassed</name>
                  <description>MIC check passed</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Enable</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable CCM</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE</name>
          <description>Operation mode</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>MODE</name>
              <description>The mode of operation to be used. The settings in this register apply whenever either the KSGEN or CRYPT tasks are triggered.</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Encryption</name>
                  <description>AES CCM packet encryption mode</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Decryption</name>
                  <description>AES CCM packet decryption mode</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DATARATE</name>
              <description>Radio data rate that the CCM shall run synchronous with</description>
              <lsb>16</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1Mbit</name>
                  <description>1 Mbps</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2Mbit</name>
                  <description>2 Mbps</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>125Kbps</name>
                  <description>125 Kbps</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>500Kbps</name>
                  <description>500 Kbps</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LENGTH</name>
              <description>Packet length configuration</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Default</name>
                  <description>Default length. Effective length of LENGTH field in encrypted/decrypted packet is 5 bits. A key-stream for packet payloads up to 27 bytes will be generated.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Extended</name>
                  <description>Extended length. Effective length of LENGTH field in encrypted/decrypted packet is 8 bits. A key-stream for packet payloads up to MAXPACKETSIZE bytes will be generated.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CNFPTR</name>
          <description>Pointer to data structure holding AES key and NONCE vector</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>CNFPTR</name>
              <description>Pointer to the data structure holding the AES key and the CCM NONCE vector (see Table 1 CCM data structure overview)</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>INPTR</name>
          <description>Input pointer</description>
          <addressOffset>0x50C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>INPTR</name>
              <description>Input pointer</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>OUTPTR</name>
          <description>Output pointer</description>
          <addressOffset>0x510</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>OUTPTR</name>
              <description>Output pointer</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>SCRATCHPTR</name>
          <description>Pointer to data area used for temporary storage</description>
          <addressOffset>0x514</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>SCRATCHPTR</name>
              <description>Pointer to a scratch data area used for temporary storage during key-stream generation,
        MIC generation and encryption/decryption.</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>MAXPACKETSIZE</name>
          <description>Length of key-stream generated when MODE.LENGTH = Extended.</description>
          <addressOffset>0x518</addressOffset>
          <access>read-write</access>
          <resetValue>0x000000FB</resetValue>
          <fields>
            <field>
              <name>MAXPACKETSIZE</name>
              <description>Length of key-stream generated when MODE.LENGTH = Extended. This value must be greater or equal to the subsequent packet payload to be encrypted/decrypted.</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>RATEOVERRIDE</name>
          <description>Data rate override setting.</description>
          <addressOffset>0x51C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RATEOVERRIDE</name>
              <description>Data rate override setting.</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1Mbit</name>
                  <description>1 Mbps</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2Mbit</name>
                  <description>2 Mbps</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>125Kbps</name>
                  <description>125 Kbps</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>500Kbps</name>
                  <description>500 Kbps</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>WDT</name>
      <description>Watchdog Timer</description>
      <baseAddress>0x40010000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>WDT</name>
        <value>16</value>
      </interrupt>
      <groupName>WDT</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>TASKS_START</name>
          <description>Start the watchdog</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_START</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_TIMEOUT</name>
          <description>Watchdog timeout</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_TIMEOUT</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TIMEOUT</name>
              <description>Write '1' to enable interrupt for TIMEOUT event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TIMEOUT</name>
              <description>Write '1' to disable interrupt for TIMEOUT event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>RUNSTATUS</name>
          <description>Run status</description>
          <addressOffset>0x400</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>RUNSTATUS</name>
              <description>Indicates whether or not the watchdog is running</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotRunning</name>
                  <description>Watchdog not running</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Running</name>
                  <description>Watchdog is running</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>REQSTATUS</name>
          <description>Request status</description>
          <addressOffset>0x404</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>RR0</name>
              <description>Request status for RR[0] register</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DisabledOrRequested</name>
                  <description>RR[0] register is not enabled, or are already requesting reload</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EnabledAndUnrequested</name>
                  <description>RR[0] register is enabled, and are not yet requesting reload</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR1</name>
              <description>Request status for RR[1] register</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DisabledOrRequested</name>
                  <description>RR[1] register is not enabled, or are already requesting reload</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EnabledAndUnrequested</name>
                  <description>RR[1] register is enabled, and are not yet requesting reload</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR2</name>
              <description>Request status for RR[2] register</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DisabledOrRequested</name>
                  <description>RR[2] register is not enabled, or are already requesting reload</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EnabledAndUnrequested</name>
                  <description>RR[2] register is enabled, and are not yet requesting reload</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR3</name>
              <description>Request status for RR[3] register</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DisabledOrRequested</name>
                  <description>RR[3] register is not enabled, or are already requesting reload</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EnabledAndUnrequested</name>
                  <description>RR[3] register is enabled, and are not yet requesting reload</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR4</name>
              <description>Request status for RR[4] register</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DisabledOrRequested</name>
                  <description>RR[4] register is not enabled, or are already requesting reload</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EnabledAndUnrequested</name>
                  <description>RR[4] register is enabled, and are not yet requesting reload</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR5</name>
              <description>Request status for RR[5] register</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DisabledOrRequested</name>
                  <description>RR[5] register is not enabled, or are already requesting reload</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EnabledAndUnrequested</name>
                  <description>RR[5] register is enabled, and are not yet requesting reload</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR6</name>
              <description>Request status for RR[6] register</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DisabledOrRequested</name>
                  <description>RR[6] register is not enabled, or are already requesting reload</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EnabledAndUnrequested</name>
                  <description>RR[6] register is enabled, and are not yet requesting reload</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR7</name>
              <description>Request status for RR[7] register</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DisabledOrRequested</name>
                  <description>RR[7] register is not enabled, or are already requesting reload</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EnabledAndUnrequested</name>
                  <description>RR[7] register is enabled, and are not yet requesting reload</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CRV</name>
          <description>Counter reload value</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>CRV</name>
              <description>Counter reload value in number of cycles of the 32.768 kHz clock</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>RREN</name>
          <description>Enable register for reload request registers</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>RR0</name>
              <description>Enable or disable RR[0] register</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable RR[0] register</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable RR[0] register</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR1</name>
              <description>Enable or disable RR[1] register</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable RR[1] register</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable RR[1] register</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR2</name>
              <description>Enable or disable RR[2] register</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable RR[2] register</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable RR[2] register</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR3</name>
              <description>Enable or disable RR[3] register</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable RR[3] register</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable RR[3] register</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR4</name>
              <description>Enable or disable RR[4] register</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable RR[4] register</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable RR[4] register</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR5</name>
              <description>Enable or disable RR[5] register</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable RR[5] register</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable RR[5] register</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR6</name>
              <description>Enable or disable RR[6] register</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable RR[6] register</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable RR[6] register</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR7</name>
              <description>Enable or disable RR[7] register</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable RR[7] register</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable RR[7] register</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CONFIG</name>
          <description>Configuration register</description>
          <addressOffset>0x50C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>SLEEP</name>
              <description>Configure the watchdog to either be paused, or kept running, while the CPU is sleeping</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Pause</name>
                  <description>Pause watchdog while the CPU is sleeping</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Run</name>
                  <description>Keep the watchdog running while the CPU is sleeping</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>HALT</name>
              <description>Configure the watchdog to either be paused, or kept running, while the CPU is halted by the debugger</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Pause</name>
                  <description>Pause watchdog while the CPU is halted by the debugger</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Run</name>
                  <description>Keep the watchdog running while the CPU is halted by the debugger</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <dim>0x8</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>RR[%s]</name>
          <description>Description collection[n]: Reload request n</description>
          <addressOffset>0x600</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>RR</name>
              <description>Reload request register</description>
              <lsb>0</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Reload</name>
                  <description>Value to request a reload of the watchdog timer</description>
                  <value>0x6E524635</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral derivedFrom="RTC0">
      <name>RTC1</name>
      <description>Real time counter 1</description>
      <baseAddress>0x40011000</baseAddress>
      <interrupt>
        <name>RTC1</name>
        <value>17</value>
      </interrupt>
    </peripheral>
    <peripheral>
      <name>QDEC</name>
      <description>Quadrature Decoder</description>
      <baseAddress>0x40012000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>QDEC</name>
        <value>18</value>
      </interrupt>
      <groupName>QDEC</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>TASKS_START</name>
          <description>Task starting the quadrature decoder</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_START</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Task stopping the quadrature decoder</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_STOP</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_READCLRACC</name>
          <description>Read and clear ACC and ACCDBL</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_READCLRACC</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_RDCLRACC</name>
          <description>Read and clear ACC</description>
          <addressOffset>0x00C</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_RDCLRACC</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_RDCLRDBL</name>
          <description>Read and clear ACCDBL</description>
          <addressOffset>0x010</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_RDCLRDBL</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_SAMPLERDY</name>
          <description>Event being generated for every new sample value written to the SAMPLE register</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_SAMPLERDY</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_REPORTRDY</name>
          <description>Non-null report ready</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_REPORTRDY</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_ACCOF</name>
          <description>ACC or ACCDBL register overflow</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_ACCOF</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_DBLRDY</name>
          <description>Double displacement(s) detected</description>
          <addressOffset>0x10C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_DBLRDY</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_STOPPED</name>
          <description>QDEC has been stopped</description>
          <addressOffset>0x110</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_STOPPED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>REPORTRDY_READCLRACC</name>
              <description>Shortcut between REPORTRDY event and READCLRACC task</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SAMPLERDY_STOP</name>
              <description>Shortcut between SAMPLERDY event and STOP task</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REPORTRDY_RDCLRACC</name>
              <description>Shortcut between REPORTRDY event and RDCLRACC task</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REPORTRDY_STOP</name>
              <description>Shortcut between REPORTRDY event and STOP task</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DBLRDY_RDCLRDBL</name>
              <description>Shortcut between DBLRDY event and RDCLRDBL task</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DBLRDY_STOP</name>
              <description>Shortcut between DBLRDY event and STOP task</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SAMPLERDY_READCLRACC</name>
              <description>Shortcut between SAMPLERDY event and READCLRACC task</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>SAMPLERDY</name>
              <description>Write '1' to enable interrupt for SAMPLERDY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REPORTRDY</name>
              <description>Write '1' to enable interrupt for REPORTRDY event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ACCOF</name>
              <description>Write '1' to enable interrupt for ACCOF event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DBLRDY</name>
              <description>Write '1' to enable interrupt for DBLRDY event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to enable interrupt for STOPPED event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>SAMPLERDY</name>
              <description>Write '1' to disable interrupt for SAMPLERDY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REPORTRDY</name>
              <description>Write '1' to disable interrupt for REPORTRDY event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ACCOF</name>
              <description>Write '1' to disable interrupt for ACCOF event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DBLRDY</name>
              <description>Write '1' to disable interrupt for DBLRDY event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to disable interrupt for STOPPED event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Enable the quadrature decoder</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable the quadrature decoder</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>LEDPOL</name>
          <description>LED output pin polarity</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>LEDPOL</name>
              <description>LED output pin polarity</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ActiveLow</name>
                  <description>Led active on output pin low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ActiveHigh</name>
                  <description>Led active on output pin high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SAMPLEPER</name>
          <description>Sample period</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>SAMPLEPER</name>
              <description>Sample period. The SAMPLE register will be updated for every new sample</description>
              <lsb>0</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>128us</name>
                  <description>128 us</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>256us</name>
                  <description>256 us</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>512us</name>
                  <description>512 us</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1024us</name>
                  <description>1024 us</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2048us</name>
                  <description>2048 us</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>4096us</name>
                  <description>4096 us</description>
                  <value>5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>8192us</name>
                  <description>8192 us</description>
                  <value>6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16384us</name>
                  <description>16384 us</description>
                  <value>7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>32ms</name>
                  <description>32768 us</description>
                  <value>8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>65ms</name>
                  <description>65536 us</description>
                  <value>9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>131ms</name>
                  <description>131072 us</description>
                  <value>10</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SAMPLE</name>
          <description>Motion sample value</description>
          <addressOffset>0x50C</addressOffset>
          <access>read-only</access>
          <dataType>int32_t</dataType>
          <fields>
            <field>
              <name>SAMPLE</name>
              <description>Last motion sample</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>REPORTPER</name>
          <description>Number of samples to be taken before REPORTRDY and DBLRDY events can be generated</description>
          <addressOffset>0x510</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>REPORTPER</name>
              <description>Specifies the number of samples to be accumulated in the ACC register before the REPORTRDY and DBLRDY events can be generated</description>
              <lsb>0</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>10Smpl</name>
                  <description>10 samples / report</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>40Smpl</name>
                  <description>40 samples / report</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>80Smpl</name>
                  <description>80 samples / report</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>120Smpl</name>
                  <description>120 samples / report</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>160Smpl</name>
                  <description>160 samples / report</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>200Smpl</name>
                  <description>200 samples / report</description>
                  <value>5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>240Smpl</name>
                  <description>240 samples / report</description>
                  <value>6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>280Smpl</name>
                  <description>280 samples / report</description>
                  <value>7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1Smpl</name>
                  <description>1 sample / report</description>
                  <value>8</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ACC</name>
          <description>Register accumulating the valid transitions</description>
          <addressOffset>0x514</addressOffset>
          <access>read-only</access>
          <dataType>int32_t</dataType>
          <fields>
            <field>
              <name>ACC</name>
              <description>Register accumulating all valid samples (not double transition) read from the SAMPLE register</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>ACCREAD</name>
          <description>Snapshot of the ACC register, updated by the READCLRACC or RDCLRACC task</description>
          <addressOffset>0x518</addressOffset>
          <access>read-only</access>
          <dataType>int32_t</dataType>
          <fields>
            <field>
              <name>ACCREAD</name>
              <description>Snapshot of the ACC register.</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <cluster>
          <name>PSEL</name>
          <description>Unspecified</description>
          <headerStructName>QDEC_PSEL</headerStructName>
          <addressOffset>0x51C</addressOffset>
          <register>
            <name>LED</name>
            <description>Pin select for LED signal</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>A</name>
            <description>Pin select for A signal</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>B</name>
            <description>Pin select for B signal</description>
            <addressOffset>0x008</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <name>DBFEN</name>
          <description>Enable input debounce filters</description>
          <addressOffset>0x528</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>DBFEN</name>
              <description>Enable input debounce filters</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Debounce input filters disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Debounce input filters enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>LEDPRE</name>
          <description>Time period the LED is switched ON prior to sampling</description>
          <addressOffset>0x540</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000010</resetValue>
          <fields>
            <field>
              <name>LEDPRE</name>
              <description>Period in us the LED is switched on prior to sampling</description>
              <lsb>0</lsb>
              <msb>8</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>ACCDBL</name>
          <description>Register accumulating the number of detected double transitions</description>
          <addressOffset>0x544</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>ACCDBL</name>
              <description>Register accumulating the number of detected double or illegal transitions. ( SAMPLE = 2 ).</description>
              <lsb>0</lsb>
              <msb>3</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>ACCDBLREAD</name>
          <description>Snapshot of the ACCDBL, updated by the READCLRACC or RDCLRDBL task</description>
          <addressOffset>0x548</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>ACCDBLREAD</name>
              <description>Snapshot of the ACCDBL register. This field is updated when the READCLRACC or RDCLRDBL task is triggered.</description>
              <lsb>0</lsb>
              <msb>3</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>COMP</name>
      <description>Comparator</description>
      <baseAddress>0x40013000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>COMP</name>
        <value>19</value>
      </interrupt>
      <groupName>COMP</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>TASKS_START</name>
          <description>Start comparator</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_START</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stop comparator</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_STOP</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_SAMPLE</name>
          <description>Sample comparator value</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_SAMPLE</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_READY</name>
          <description>COMP is ready and output is valid</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_READY</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_DOWN</name>
          <description>Downward crossing</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_DOWN</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_UP</name>
          <description>Upward crossing</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_UP</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_CROSS</name>
          <description>Downward or upward crossing</description>
          <addressOffset>0x10C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_CROSS</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>READY_SAMPLE</name>
              <description>Shortcut between READY event and SAMPLE task</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>READY_STOP</name>
              <description>Shortcut between READY event and STOP task</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DOWN_STOP</name>
              <description>Shortcut between DOWN event and STOP task</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>UP_STOP</name>
              <description>Shortcut between UP event and STOP task</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CROSS_STOP</name>
              <description>Shortcut between CROSS event and STOP task</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTEN</name>
          <description>Enable or disable interrupt</description>
          <addressOffset>0x300</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>READY</name>
              <description>Enable or disable interrupt for READY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DOWN</name>
              <description>Enable or disable interrupt for DOWN event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>UP</name>
              <description>Enable or disable interrupt for UP event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CROSS</name>
              <description>Enable or disable interrupt for CROSS event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>READY</name>
              <description>Write '1' to enable interrupt for READY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DOWN</name>
              <description>Write '1' to enable interrupt for DOWN event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>UP</name>
              <description>Write '1' to enable interrupt for UP event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CROSS</name>
              <description>Write '1' to enable interrupt for CROSS event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>READY</name>
              <description>Write '1' to disable interrupt for READY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DOWN</name>
              <description>Write '1' to disable interrupt for DOWN event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>UP</name>
              <description>Write '1' to disable interrupt for UP event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CROSS</name>
              <description>Write '1' to disable interrupt for CROSS event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>RESULT</name>
          <description>Compare result</description>
          <addressOffset>0x400</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>RESULT</name>
              <description>Result of last compare. Decision point SAMPLE task.</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Below</name>
                  <description>Input voltage is below the threshold (VIN+ &amp;lt; VIN-)</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Above</name>
                  <description>Input voltage is above the threshold (VIN+ &amp;gt; VIN-)</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>COMP enable</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable COMP</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>PSEL</name>
          <description>Pin select</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>PSEL</name>
              <description>Analog pin select</description>
              <lsb>0</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AnalogInput0</name>
                  <description>AIN0 selected as analog input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogInput1</name>
                  <description>AIN1 selected as analog input</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogInput2</name>
                  <description>AIN2 selected as analog input</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogInput3</name>
                  <description>AIN3 selected as analog input</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogInput4</name>
                  <description>AIN4 selected as analog input</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogInput5</name>
                  <description>AIN5 selected as analog input</description>
                  <value>5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogInput6</name>
                  <description>AIN6 selected as analog input</description>
                  <value>6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>VddDiv2</name>
                  <description>VDD/2 selected as analog input</description>
                  <value>7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>REFSEL</name>
          <description>Reference source select for single-ended mode</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000004</resetValue>
          <fields>
            <field>
              <name>REFSEL</name>
              <description>Reference select</description>
              <lsb>0</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Int1V2</name>
                  <description>VREF = internal 1.2 V reference (VDD &amp;gt;= 1.7 V)</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Int1V8</name>
                  <description>VREF = internal 1.8 V reference (VDD &amp;gt;= VREF + 0.2 V)</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Int2V4</name>
                  <description>VREF = internal 2.4 V reference (VDD &amp;gt;= VREF + 0.2 V)</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>VDD</name>
                  <description>VREF = VDD</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ARef</name>
                  <description>VREF = AREF (VDD &amp;gt;= VREF &amp;gt;= AREFMIN)</description>
                  <value>5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>EXTREFSEL</name>
          <description>External reference select</description>
          <addressOffset>0x50C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EXTREFSEL</name>
              <description>External analog reference select</description>
              <lsb>0</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AnalogReference0</name>
                  <description>Use AIN0 as external analog reference</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogReference1</name>
                  <description>Use AIN1 as external analog reference</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogReference2</name>
                  <description>Use AIN2 as external analog reference</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogReference3</name>
                  <description>Use AIN3 as external analog reference</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogReference4</name>
                  <description>Use AIN4 as external analog reference</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogReference5</name>
                  <description>Use AIN5 as external analog reference</description>
                  <value>5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogReference6</name>
                  <description>Use AIN6 as external analog reference</description>
                  <value>6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogReference7</name>
                  <description>Use AIN7 as external analog reference</description>
                  <value>7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>TH</name>
          <description>Threshold configuration for hysteresis unit</description>
          <addressOffset>0x530</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>THDOWN</name>
              <description>VDOWN = (THDOWN+1)/64*VREF</description>
              <lsb>0</lsb>
              <msb>5</msb>
            </field>
            <field>
              <name>THUP</name>
              <description>VUP = (THUP+1)/64*VREF</description>
              <lsb>8</lsb>
              <msb>13</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE</name>
          <description>Mode configuration</description>
          <addressOffset>0x534</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>SP</name>
              <description>Speed and power modes</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Low-power mode</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Normal</name>
                  <description>Normal mode</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>High-speed mode</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>MAIN</name>
              <description>Main operation modes</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SE</name>
                  <description>Single-ended mode</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Diff</name>
                  <description>Differential mode</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>HYST</name>
          <description>Comparator hysteresis enable</description>
          <addressOffset>0x538</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>HYST</name>
              <description>Comparator hysteresis</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NoHyst</name>
                  <description>Comparator hysteresis disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Hyst50mV</name>
                  <description>Comparator hysteresis enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>EGU0</name>
      <description>Event Generator Unit 0</description>
      <baseAddress>0x40014000</baseAddress>
      <headerStructName>EGU</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>SWI0_EGU0</name>
        <value>20</value>
      </interrupt>
      <groupName>EGU</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <dim>0x10</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>TASKS_TRIGGER[%s]</name>
          <description>Description collection[n]: Trigger n for triggering the corresponding TRIGGERED[n] event</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_TRIGGER</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>0x10</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>EVENTS_TRIGGERED[%s]</name>
          <description>Description collection[n]: Event number n generated by triggering the corresponding TRIGGER[n] task</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_TRIGGERED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>INTEN</name>
          <description>Enable or disable interrupt</description>
          <addressOffset>0x300</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TRIGGERED0</name>
              <description>Enable or disable interrupt for TRIGGERED[0] event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED1</name>
              <description>Enable or disable interrupt for TRIGGERED[1] event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED2</name>
              <description>Enable or disable interrupt for TRIGGERED[2] event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED3</name>
              <description>Enable or disable interrupt for TRIGGERED[3] event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED4</name>
              <description>Enable or disable interrupt for TRIGGERED[4] event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED5</name>
              <description>Enable or disable interrupt for TRIGGERED[5] event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED6</name>
              <description>Enable or disable interrupt for TRIGGERED[6] event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED7</name>
              <description>Enable or disable interrupt for TRIGGERED[7] event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED8</name>
              <description>Enable or disable interrupt for TRIGGERED[8] event</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED9</name>
              <description>Enable or disable interrupt for TRIGGERED[9] event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED10</name>
              <description>Enable or disable interrupt for TRIGGERED[10] event</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED11</name>
              <description>Enable or disable interrupt for TRIGGERED[11] event</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED12</name>
              <description>Enable or disable interrupt for TRIGGERED[12] event</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED13</name>
              <description>Enable or disable interrupt for TRIGGERED[13] event</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED14</name>
              <description>Enable or disable interrupt for TRIGGERED[14] event</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED15</name>
              <description>Enable or disable interrupt for TRIGGERED[15] event</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TRIGGERED0</name>
              <description>Write '1' to enable interrupt for TRIGGERED[0] event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED1</name>
              <description>Write '1' to enable interrupt for TRIGGERED[1] event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED2</name>
              <description>Write '1' to enable interrupt for TRIGGERED[2] event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED3</name>
              <description>Write '1' to enable interrupt for TRIGGERED[3] event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED4</name>
              <description>Write '1' to enable interrupt for TRIGGERED[4] event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED5</name>
              <description>Write '1' to enable interrupt for TRIGGERED[5] event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED6</name>
              <description>Write '1' to enable interrupt for TRIGGERED[6] event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED7</name>
              <description>Write '1' to enable interrupt for TRIGGERED[7] event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED8</name>
              <description>Write '1' to enable interrupt for TRIGGERED[8] event</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED9</name>
              <description>Write '1' to enable interrupt for TRIGGERED[9] event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED10</name>
              <description>Write '1' to enable interrupt for TRIGGERED[10] event</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED11</name>
              <description>Write '1' to enable interrupt for TRIGGERED[11] event</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED12</name>
              <description>Write '1' to enable interrupt for TRIGGERED[12] event</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED13</name>
              <description>Write '1' to enable interrupt for TRIGGERED[13] event</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED14</name>
              <description>Write '1' to enable interrupt for TRIGGERED[14] event</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED15</name>
              <description>Write '1' to enable interrupt for TRIGGERED[15] event</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TRIGGERED0</name>
              <description>Write '1' to disable interrupt for TRIGGERED[0] event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED1</name>
              <description>Write '1' to disable interrupt for TRIGGERED[1] event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED2</name>
              <description>Write '1' to disable interrupt for TRIGGERED[2] event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED3</name>
              <description>Write '1' to disable interrupt for TRIGGERED[3] event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED4</name>
              <description>Write '1' to disable interrupt for TRIGGERED[4] event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED5</name>
              <description>Write '1' to disable interrupt for TRIGGERED[5] event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED6</name>
              <description>Write '1' to disable interrupt for TRIGGERED[6] event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED7</name>
              <description>Write '1' to disable interrupt for TRIGGERED[7] event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED8</name>
              <description>Write '1' to disable interrupt for TRIGGERED[8] event</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED9</name>
              <description>Write '1' to disable interrupt for TRIGGERED[9] event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED10</name>
              <description>Write '1' to disable interrupt for TRIGGERED[10] event</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED11</name>
              <description>Write '1' to disable interrupt for TRIGGERED[11] event</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED12</name>
              <description>Write '1' to disable interrupt for TRIGGERED[12] event</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED13</name>
              <description>Write '1' to disable interrupt for TRIGGERED[13] event</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED14</name>
              <description>Write '1' to disable interrupt for TRIGGERED[14] event</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED15</name>
              <description>Write '1' to disable interrupt for TRIGGERED[15] event</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>SWI0</name>
      <description>Software interrupt 0</description>
      <baseAddress>0x40014000</baseAddress>
      <alternatePeripheral>EGU0</alternatePeripheral>
      <headerStructName>SWI</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>SWI0_EGU0</name>
        <value>20</value>
      </interrupt>
      <groupName>SWI</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>UNUSED</name>
          <description>Unused.</description>
          <addressOffset>0x000</addressOffset>
          <resetValue>0x00000000</resetValue>
          <access>read-only</access>
        </register>
      </registers>
    </peripheral>
    <peripheral derivedFrom="EGU0">
      <name>EGU1</name>
      <description>Event Generator Unit 1</description>
      <baseAddress>0x40015000</baseAddress>
      <interrupt>
        <name>SWI1_EGU1</name>
        <value>21</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="SWI0">
      <name>SWI1</name>
      <description>Software interrupt 1</description>
      <baseAddress>0x40015000</baseAddress>
      <alternatePeripheral>EGU1</alternatePeripheral>
      <interrupt>
        <name>SWI1_EGU1</name>
        <value>21</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="SWI0">
      <name>SWI2</name>
      <description>Software interrupt 2</description>
      <baseAddress>0x40016000</baseAddress>
      <interrupt>
        <name>SWI2</name>
        <value>22</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="SWI0">
      <name>SWI3</name>
      <description>Software interrupt 3</description>
      <baseAddress>0x40017000</baseAddress>
      <interrupt>
        <name>SWI3</name>
        <value>23</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="SWI0">
      <name>SWI4</name>
      <description>Software interrupt 4</description>
      <baseAddress>0x40018000</baseAddress>
      <interrupt>
        <name>SWI4</name>
        <value>24</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="SWI0">
      <name>SWI5</name>
      <description>Software interrupt 5</description>
      <baseAddress>0x40019000</baseAddress>
      <interrupt>
        <name>SWI5</name>
        <value>25</value>
      </interrupt>
    </peripheral>
    <peripheral>
      <name>PWM0</name>
      <description>Pulse width modulation unit</description>
      <baseAddress>0x4001C000</baseAddress>
      <headerStructName>PWM</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>PWM0</name>
        <value>28</value>
      </interrupt>
      <groupName>PWM</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>TASKS_STOP</name>
          <description>Stops PWM pulse generation on all channels at the end of current PWM period, and stops sequence playback</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_STOP</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>0x2</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>TASKS_SEQSTART[%s]</name>
          <description>Description collection[n]: Loads the first PWM value on all enabled channels from sequence n, and starts playing that sequence at the rate defined in SEQ[n]REFRESH and/or DECODER.MODE. Causes PWM generation to start if not running.</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_SEQSTART</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_NEXTSTEP</name>
          <description>Steps by one value in the current sequence on all enabled channels if DECODER.MODE=NextStep. Does not cause PWM generation to start if not running.</description>
          <addressOffset>0x010</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_NEXTSTEP</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_STOPPED</name>
          <description>Response to STOP task, emitted when PWM pulses are no longer generated</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_STOPPED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>0x2</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>EVENTS_SEQSTARTED[%s]</name>
          <description>Description collection[n]: First PWM period started on sequence n</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_SEQSTARTED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>0x2</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>EVENTS_SEQEND[%s]</name>
          <description>Description collection[n]: Emitted at end of every sequence n, when last value from RAM has been applied to wave counter</description>
          <addressOffset>0x110</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_SEQEND</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_PWMPERIODEND</name>
          <description>Emitted at the end of each PWM period</description>
          <addressOffset>0x118</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_PWMPERIODEND</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_LOOPSDONE</name>
          <description>Concatenated sequences have been played the amount of times defined in LOOP.CNT</description>
          <addressOffset>0x11C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_LOOPSDONE</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>SEQEND0_STOP</name>
              <description>Shortcut between SEQEND[0] event and STOP task</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQEND1_STOP</name>
              <description>Shortcut between SEQEND[1] event and STOP task</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOOPSDONE_SEQSTART0</name>
              <description>Shortcut between LOOPSDONE event and SEQSTART[0] task</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOOPSDONE_SEQSTART1</name>
              <description>Shortcut between LOOPSDONE event and SEQSTART[1] task</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOOPSDONE_STOP</name>
              <description>Shortcut between LOOPSDONE event and STOP task</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTEN</name>
          <description>Enable or disable interrupt</description>
          <addressOffset>0x300</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STOPPED</name>
              <description>Enable or disable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQSTARTED0</name>
              <description>Enable or disable interrupt for SEQSTARTED[0] event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQSTARTED1</name>
              <description>Enable or disable interrupt for SEQSTARTED[1] event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQEND0</name>
              <description>Enable or disable interrupt for SEQEND[0] event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQEND1</name>
              <description>Enable or disable interrupt for SEQEND[1] event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PWMPERIODEND</name>
              <description>Enable or disable interrupt for PWMPERIODEND event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOOPSDONE</name>
              <description>Enable or disable interrupt for LOOPSDONE event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to enable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQSTARTED0</name>
              <description>Write '1' to enable interrupt for SEQSTARTED[0] event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQSTARTED1</name>
              <description>Write '1' to enable interrupt for SEQSTARTED[1] event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQEND0</name>
              <description>Write '1' to enable interrupt for SEQEND[0] event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQEND1</name>
              <description>Write '1' to enable interrupt for SEQEND[1] event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PWMPERIODEND</name>
              <description>Write '1' to enable interrupt for PWMPERIODEND event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOOPSDONE</name>
              <description>Write '1' to enable interrupt for LOOPSDONE event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to disable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQSTARTED0</name>
              <description>Write '1' to disable interrupt for SEQSTARTED[0] event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQSTARTED1</name>
              <description>Write '1' to disable interrupt for SEQSTARTED[1] event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQEND0</name>
              <description>Write '1' to disable interrupt for SEQEND[0] event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQEND1</name>
              <description>Write '1' to disable interrupt for SEQEND[1] event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PWMPERIODEND</name>
              <description>Write '1' to disable interrupt for PWMPERIODEND event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOOPSDONE</name>
              <description>Write '1' to disable interrupt for LOOPSDONE event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>PWM module enable register</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable PWM module</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE</name>
          <description>Selects operating mode of the wave counter</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>UPDOWN</name>
              <description>Selects up mode or up-and-down mode for the counter</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Up</name>
                  <description>Up counter, edge-aligned PWM duty cycle</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UpAndDown</name>
                  <description>Up and down counter, center-aligned PWM duty cycle</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>COUNTERTOP</name>
          <description>Value up to which the pulse generator counter counts</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <resetValue>0x000003FF</resetValue>
          <fields>
            <field>
              <name>COUNTERTOP</name>
              <description>Value up to which the pulse generator counter counts. This register is ignored when DECODER.MODE=WaveForm and only values from RAM are used.</description>
              <lsb>0</lsb>
              <msb>14</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>PRESCALER</name>
          <description>Configuration for PWM_CLK</description>
          <addressOffset>0x50C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PRESCALER</name>
              <description>Prescaler of PWM_CLK</description>
              <lsb>0</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DIV_1</name>
                  <description>Divide by 1 (16 MHz)</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV_2</name>
                  <description>Divide by 2 (8 MHz)</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV_4</name>
                  <description>Divide by 4 (4 MHz)</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV_8</name>
                  <description>Divide by 8 (2 MHz)</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV_16</name>
                  <description>Divide by 16 (1 MHz)</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV_32</name>
                  <description>Divide by 32 (500 kHz)</description>
                  <value>5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV_64</name>
                  <description>Divide by 64 (250 kHz)</description>
                  <value>6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV_128</name>
                  <description>Divide by 128 (125 kHz)</description>
                  <value>7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>DECODER</name>
          <description>Configuration of the decoder</description>
          <addressOffset>0x510</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>LOAD</name>
              <description>How a sequence is read from RAM and spread to the compare register</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Common</name>
                  <description>1st half word (16-bit) used in all PWM channels 0..3</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Grouped</name>
                  <description>1st half word (16-bit) used in channel 0..1; 2nd word in channel 2..3</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Individual</name>
                  <description>1st half word (16-bit) in ch.0; 2nd in ch.1; ...; 4th in ch.3</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WaveForm</name>
                  <description>1st half word (16-bit) in ch.0; 2nd in ch.1; ...; 4th in COUNTERTOP</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>MODE</name>
              <description>Selects source for advancing the active sequence</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>RefreshCount</name>
                  <description>SEQ[n].REFRESH is used to determine loading internal compare registers</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NextStep</name>
                  <description>NEXTSTEP task causes a new value to be loaded to internal compare registers</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>LOOP</name>
          <description>Number of playbacks of a loop</description>
          <addressOffset>0x514</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CNT</name>
              <description>Number of playbacks of pattern cycles</description>
              <lsb>0</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Looping disabled (stop at the end of the sequence)</description>
                  <value>0</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <dim>2</dim>
          <dimIncrement>0x020</dimIncrement>
          <name>SEQ[%s]</name>
          <description>Unspecified</description>
          <headerStructName>PWM_SEQ</headerStructName>
          <addressOffset>0x520</addressOffset>
          <register>
            <name>PTR</name>
            <description>Description cluster[n]: Beginning address in RAM of this sequence</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000000</resetValue>
            <fields>
              <field>
                <name>PTR</name>
                <description>Beginning address in RAM of this sequence</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>CNT</name>
            <description>Description cluster[n]: Number of values (duty cycles) in this sequence</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000000</resetValue>
            <fields>
              <field>
                <name>CNT</name>
                <description>Number of values (duty cycles) in this sequence</description>
                <lsb>0</lsb>
                <msb>14</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disabled</name>
                    <description>Sequence is disabled, and shall not be started as it is empty</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>REFRESH</name>
            <description>Description cluster[n]: Number of additional PWM periods between samples loaded into compare register</description>
            <addressOffset>0x008</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000001</resetValue>
            <fields>
              <field>
                <name>CNT</name>
                <description>Number of additional PWM periods between samples loaded into compare register (load every REFRESH.CNT+1 PWM periods)</description>
                <lsb>0</lsb>
                <msb>23</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Continuous</name>
                    <description>Update every PWM period</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>ENDDELAY</name>
            <description>Description cluster[n]: Time added after the sequence</description>
            <addressOffset>0x00C</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000000</resetValue>
            <fields>
              <field>
                <name>CNT</name>
                <description>Time added after the sequence in PWM periods</description>
                <lsb>0</lsb>
                <msb>23</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <name>PSEL</name>
          <description>Unspecified</description>
          <headerStructName>PWM_PSEL</headerStructName>
          <addressOffset>0x560</addressOffset>
          <register>
            <dim>0x4</dim>
            <dimIncrement>0x4</dimIncrement>
            <name>OUT[%s]</name>
            <description>Description collection[n]: Output pin select for PWM channel n</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
      </registers>
    </peripheral>
    <peripheral>
      <name>PDM</name>
      <description>Pulse Density Modulation (Digital Microphone) Interface</description>
      <baseAddress>0x4001D000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>PDM</name>
        <value>29</value>
      </interrupt>
      <groupName>PDM</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>TASKS_START</name>
          <description>Starts continuous PDM transfer</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_START</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stops PDM transfer</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TASKS_STOP</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_STARTED</name>
          <description>PDM transfer has started</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_STARTED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_STOPPED</name>
          <description>PDM transfer has finished</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_STOPPED</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>EVENTS_END</name>
          <description>The PDM has written the last sample specified by SAMPLE.MAXCNT (or the last sample after a STOP task has been received) to Data RAM</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EVENTS_END</name>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>INTEN</name>
          <description>Enable or disable interrupt</description>
          <addressOffset>0x300</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STARTED</name>
              <description>Enable or disable interrupt for STARTED event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STOPPED</name>
              <description>Enable or disable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>END</name>
              <description>Enable or disable interrupt for END event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STARTED</name>
              <description>Write '1' to enable interrupt for STARTED event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to enable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>END</name>
              <description>Write '1' to enable interrupt for END event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STARTED</name>
              <description>Write '1' to disable interrupt for STARTED event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to disable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>END</name>
              <description>Write '1' to disable interrupt for END event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>PDM module enable register</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable PDM module</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>PDMCLKCTRL</name>
          <description>PDM clock generator control</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <resetValue>0x08400000</resetValue>
          <fields>
            <field>
              <name>FREQ</name>
              <description>PDM_CLK frequency</description>
              <lsb>0</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1000K</name>
                  <description>PDM_CLK = 32 MHz / 32 = 1.000 MHz</description>
                  <value>0x08000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Default</name>
                  <description>PDM_CLK = 32 MHz / 31 = 1.032 MHz</description>
                  <value>0x08400000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1067K</name>
                  <description>PDM_CLK = 32 MHz / 30 = 1.067 MHz</description>
                  <value>0x08800000</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE</name>
          <description>Defines the routing of the connected PDM microphones' signals</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>OPERATION</name>
              <description>Mono or stereo operation</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Stereo</name>
                  <description>Sample and store one pair (Left + Right) of 16bit samples per RAM word R=[31:16]; L=[15:0]</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Mono</name>
                  <description>Sample and store two successive Left samples (16 bit each) per RAM word L1=[31:16]; L0=[15:0]</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EDGE</name>
              <description>Defines on which PDM_CLK edge Left (or mono) is sampled</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>LeftFalling</name>
                  <description>Left (or mono) is sampled on falling edge of PDM_CLK</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LeftRising</name>
                  <description>Left (or mono) is sampled on rising edge of PDM_CLK</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>GAINL</name>
          <description>Left output gain adjustment</description>
          <addressOffset>0x518</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000028</resetValue>
          <fields>
            <field>
              <name>GAINL</name>
              <description>Left output gain adjustment, in 0.5 dB steps, around the default module gain (see electrical parameters) 0x00    -20 dB gain adjust 0x01  -19.5 dB gain adjust (...) 0x27   -0.5 dB gain adjust 0x28      0 dB gain adjust 0x29   +0.5 dB gain adjust (...) 0x4F  +19.5 dB gain adjust 0x50    +20 dB gain adjust</description>
              <lsb>0</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MinGain</name>
                  <description>-20dB gain adjustment (minimum)</description>
                  <value>0x00</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DefaultGain</name>
                  <description>0dB gain adjustment ('2500 RMS' requirement)</description>
                  <value>0x28</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MaxGain</name>
                  <description>+20dB gain adjustment (maximum)</description>
                  <value>0x50</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>GAINR</name>
          <description>Right output gain adjustment</description>
          <addressOffset>0x51C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000028</resetValue>
          <fields>
            <field>
              <name>GAINR</name>
              <description>Right output gain adjustment, in 0.5 dB steps, around the default module gain (see electrical parameters)</description>
              <lsb>0</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MinGain</name>
                  <description>-20dB gain adjustment (minimum)</description>
                  <value>0x00</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DefaultGain</name>
                  <description>0dB gain adjustment ('2500 RMS' requirement)</description>
                  <value>0x28</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MaxGain</name>
                  <description>+20dB gain adjustment (maximum)</description>
                  <value>0x50</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <name>PSEL</name>
          <description>Unspecified</description>
          <headerStructName>PDM_PSEL</headerStructName>
          <addressOffset>0x540</addressOffset>
          <register>
            <name>CLK</name>
            <description>Pin number configuration for PDM CLK signal</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>DIN</name>
            <description>Pin number configuration for PDM DIN signal</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <name>SAMPLE</name>
          <description>Unspecified</description>
          <headerStructName>PDM_SAMPLE</headerStructName>
          <addressOffset>0x560</addressOffset>
          <register>
            <name>PTR</name>
            <description>RAM address pointer to write samples to with EasyDMA</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>SAMPLEPTR</name>
                <description>Address to write PDM samples to over DMA</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>MAXCNT</name>
            <description>Number of samples to allocate memory for in EasyDMA mode</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>BUFFSIZE</name>
                <description>Length of DMA RAM allocation in number of samples</description>
                <lsb>0</lsb>
                <msb>14</msb>
              </field>
            </fields>
          </register>
        </cluster>
      </registers>
    </peripheral>
    <peripheral>
      <name>NVMC</name>
      <description>Non-volatile memory controller</description>
      <baseAddress>0x4001E000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <groupName>NVMC</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>READY</name>
          <description>Ready flag</description>
          <addressOffset>0x400</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>READY</name>
              <description>NVMC is ready or busy</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Busy</name>
                  <description>NVMC is busy (ongoing write or erase operation)</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Ready</name>
                  <description>NVMC is ready</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CONFIG</name>
          <description>Configuration register</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>WEN</name>
              <description>Program memory access mode. It is strongly recommended to activate erase and write modes only when they are actively used.</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Ren</name>
                  <description>Read only access</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Wen</name>
                  <description>Write enabled</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Een</name>
                  <description>Erase enabled</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ERASEPAGE</name>
          <description>Register for erasing a page in code area</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ERASEPAGE</name>
              <description>Register for starting erase of a page in code area.</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>ERASEPCR1</name>
          <description>Deprecated register - Register for erasing a page in code area. Equivalent to ERASEPAGE.</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <alternateRegister>ERASEPAGE</alternateRegister>
          <fields>
            <field>
              <name>ERASEPCR1</name>
              <description>Register for erasing a page in code area. Equivalent to ERASEPAGE.</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>ERASEALL</name>
          <description>Register for erasing all non-volatile user memory</description>
          <addressOffset>0x50C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ERASEALL</name>
              <description>Erase all non-volatile memory including UICR registers. Note that the erase must be enabled using CONFIG.WEN before the non-volatile memory can be erased.</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NoOperation</name>
                  <description>No operation</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Erase</name>
                  <description>Start erase of chip</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ERASEPCR0</name>
          <description>Deprecated register - Register for erasing a page in code area. Equivalent to ERASEPAGE.</description>
          <addressOffset>0x510</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ERASEPCR0</name>
              <description>Register for starting erase of a page in code area. Equivalent to ERASEPAGE.</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>ERASEUICR</name>
          <description>Register for erasing user information configuration registers</description>
          <addressOffset>0x514</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ERASEUICR</name>
              <description>Register starting erase of all user information configuration registers. Note that the erase must be enabled using CONFIG.WEN before the UICR can be erased.</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NoOperation</name>
                  <description>No operation</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Erase</name>
                  <description>Start erase of UICR</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ERASEPAGEPARTIAL</name>
          <description>Register for partial erase of a page in code area</description>
          <addressOffset>0x518</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ERASEPAGEPARTIAL</name>
              <description>Register for starting partial erase of a page in code area</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>ERASEPAGEPARTIALCFG</name>
          <description>Register for partial erase configuration</description>
          <addressOffset>0x51C</addressOffset>
          <access>read-write</access>
          <resetValue>0x0000000A</resetValue>
          <fields>
            <field>
              <name>DURATION</name>
              <description>Duration of the partial erase in milliseconds</description>
              <lsb>0</lsb>
              <msb>6</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>PPI</name>
      <description>Programmable Peripheral Interconnect</description>
      <baseAddress>0x4001F000</baseAddress>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <groupName>PPI</groupName>
      <size>0x20</size>
      <registers>
        <cluster>
          <dim>6</dim>
          <dimIncrement>0x008</dimIncrement>
          <name>TASKS_CHG[%s]</name>
          <description>Channel group tasks</description>
          <headerStructName>PPI_TASKS_CHG</headerStructName>
          <addressOffset>0x000</addressOffset>
          <register>
            <name>EN</name>
            <description>Description cluster[n]: Enable channel group n</description>
            <addressOffset>0x000</addressOffset>
            <access>write-only</access>
            <fields>
              <field>
                <name>EN</name>
                <lsb>0</lsb>
                <msb>0</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>DIS</name>
            <description>Description cluster[n]: Disable channel group n</description>
            <addressOffset>0x004</addressOffset>
            <access>write-only</access>
            <fields>
              <field>
                <name>DIS</name>
                <lsb>0</lsb>
                <msb>0</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <name>CHEN</name>
          <description>Channel enable register</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>CH0</name>
              <description>Enable or disable channel 0</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH1</name>
              <description>Enable or disable channel 1</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH2</name>
              <description>Enable or disable channel 2</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH3</name>
              <description>Enable or disable channel 3</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH4</name>
              <description>Enable or disable channel 4</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH5</name>
              <description>Enable or disable channel 5</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH6</name>
              <description>Enable or disable channel 6</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH7</name>
              <description>Enable or disable channel 7</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH8</name>
              <description>Enable or disable channel 8</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH9</name>
              <description>Enable or disable channel 9</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH10</name>
              <description>Enable or disable channel 10</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH11</name>
              <description>Enable or disable channel 11</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH12</name>
              <description>Enable or disable channel 12</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH13</name>
              <description>Enable or disable channel 13</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH14</name>
              <description>Enable or disable channel 14</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH15</name>
              <description>Enable or disable channel 15</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH16</name>
              <description>Enable or disable channel 16</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH17</name>
              <description>Enable or disable channel 17</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH18</name>
              <description>Enable or disable channel 18</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH19</name>
              <description>Enable or disable channel 19</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH20</name>
              <description>Enable or disable channel 20</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH21</name>
              <description>Enable or disable channel 21</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH22</name>
              <description>Enable or disable channel 22</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH23</name>
              <description>Enable or disable channel 23</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH24</name>
              <description>Enable or disable channel 24</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH25</name>
              <description>Enable or disable channel 25</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH26</name>
              <description>Enable or disable channel 26</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH27</name>
              <description>Enable or disable channel 27</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH28</name>
              <description>Enable or disable channel 28</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH29</name>
              <description>Enable or disable channel 29</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH30</name>
              <description>Enable or disable channel 30</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH31</name>
              <description>Enable or disable channel 31</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CHENSET</name>
          <description>Channel enable set register</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <modifiedWriteValues>oneToSet</modifiedWriteValues>
          <fields>
            <field>
              <name>CH0</name>
              <description>Channel 0 enable set register.  Writing '0' has no effect</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH1</name>
              <description>Channel 1 enable set register.  Writing '0' has no effect</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH2</name>
              <description>Channel 2 enable set register.  Writing '0' has no effect</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH3</name>
              <description>Channel 3 enable set register.  Writing '0' has no effect</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH4</name>
              <description>Channel 4 enable set register.  Writing '0' has no effect</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH5</name>
              <description>Channel 5 enable set register.  Writing '0' has no effect</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH6</name>
              <description>Channel 6 enable set register.  Writing '0' has no effect</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH7</name>
              <description>Channel 7 enable set register.  Writing '0' has no effect</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH8</name>
              <description>Channel 8 enable set register.  Writing '0' has no effect</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH9</name>
              <description>Channel 9 enable set register.  Writing '0' has no effect</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH10</name>
              <description>Channel 10 enable set register.  Writing '0' has no effect</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH11</name>
              <description>Channel 11 enable set register.  Writing '0' has no effect</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH12</name>
              <description>Channel 12 enable set register.  Writing '0' has no effect</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH13</name>
              <description>Channel 13 enable set register.  Writing '0' has no effect</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH14</name>
              <description>Channel 14 enable set register.  Writing '0' has no effect</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH15</name>
              <description>Channel 15 enable set register.  Writing '0' has no effect</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH16</name>
              <description>Channel 16 enable set register.  Writing '0' has no effect</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH17</name>
              <description>Channel 17 enable set register.  Writing '0' has no effect</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH18</name>
              <description>Channel 18 enable set register.  Writing '0' has no effect</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH19</name>
              <description>Channel 19 enable set register.  Writing '0' has no effect</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH20</name>
              <description>Channel 20 enable set register.  Writing '0' has no effect</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH21</name>
              <description>Channel 21 enable set register.  Writing '0' has no effect</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH22</name>
              <description>Channel 22 enable set register.  Writing '0' has no effect</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH23</name>
              <description>Channel 23 enable set register.  Writing '0' has no effect</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH24</name>
              <description>Channel 24 enable set register.  Writing '0' has no effect</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH25</name>
              <description>Channel 25 enable set register.  Writing '0' has no effect</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH26</name>
              <description>Channel 26 enable set register.  Writing '0' has no effect</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH27</name>
              <description>Channel 27 enable set register.  Writing '0' has no effect</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH28</name>
              <description>Channel 28 enable set register.  Writing '0' has no effect</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH29</name>
              <description>Channel 29 enable set register.  Writing '0' has no effect</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH30</name>
              <description>Channel 30 enable set register.  Writing '0' has no effect</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH31</name>
              <description>Channel 31 enable set register.  Writing '0' has no effect</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CHENCLR</name>
          <description>Channel enable clear register</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <modifiedWriteValues>oneToClear</modifiedWriteValues>
          <fields>
            <field>
              <name>CH0</name>
              <description>Channel 0 enable clear register.  Writing '0' has no effect</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH1</name>
              <description>Channel 1 enable clear register.  Writing '0' has no effect</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH2</name>
              <description>Channel 2 enable clear register.  Writing '0' has no effect</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH3</name>
              <description>Channel 3 enable clear register.  Writing '0' has no effect</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH4</name>
              <description>Channel 4 enable clear register.  Writing '0' has no effect</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH5</name>
              <description>Channel 5 enable clear register.  Writing '0' has no effect</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH6</name>
              <description>Channel 6 enable clear register.  Writing '0' has no effect</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH7</name>
              <description>Channel 7 enable clear register.  Writing '0' has no effect</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH8</name>
              <description>Channel 8 enable clear register.  Writing '0' has no effect</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH9</name>
              <description>Channel 9 enable clear register.  Writing '0' has no effect</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH10</name>
              <description>Channel 10 enable clear register.  Writing '0' has no effect</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH11</name>
              <description>Channel 11 enable clear register.  Writing '0' has no effect</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH12</name>
              <description>Channel 12 enable clear register.  Writing '0' has no effect</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH13</name>
              <description>Channel 13 enable clear register.  Writing '0' has no effect</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH14</name>
              <description>Channel 14 enable clear register.  Writing '0' has no effect</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH15</name>
              <description>Channel 15 enable clear register.  Writing '0' has no effect</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH16</name>
              <description>Channel 16 enable clear register.  Writing '0' has no effect</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH17</name>
              <description>Channel 17 enable clear register.  Writing '0' has no effect</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH18</name>
              <description>Channel 18 enable clear register.  Writing '0' has no effect</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH19</name>
              <description>Channel 19 enable clear register.  Writing '0' has no effect</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH20</name>
              <description>Channel 20 enable clear register.  Writing '0' has no effect</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH21</name>
              <description>Channel 21 enable clear register.  Writing '0' has no effect</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH22</name>
              <description>Channel 22 enable clear register.  Writing '0' has no effect</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH23</name>
              <description>Channel 23 enable clear register.  Writing '0' has no effect</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH24</name>
              <description>Channel 24 enable clear register.  Writing '0' has no effect</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH25</name>
              <description>Channel 25 enable clear register.  Writing '0' has no effect</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH26</name>
              <description>Channel 26 enable clear register.  Writing '0' has no effect</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH27</name>
              <description>Channel 27 enable clear register.  Writing '0' has no effect</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH28</name>
              <description>Channel 28 enable clear register.  Writing '0' has no effect</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH29</name>
              <description>Channel 29 enable clear register.  Writing '0' has no effect</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH30</name>
              <description>Channel 30 enable clear register.  Writing '0' has no effect</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH31</name>
              <description>Channel 31 enable clear register.  Writing '0' has no effect</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <dim>20</dim>
          <dimIncrement>0x008</dimIncrement>
          <name>CH[%s]</name>
          <description>PPI Channel</description>
          <headerStructName>PPI_CH</headerStructName>
          <addressOffset>0x510</addressOffset>
          <register>
            <name>EEP</name>
            <description>Description cluster[n]: Channel n event end-point</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>EEP</name>
                <description>Pointer to event register. Accepts only addresses to registers from the Event group.</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>TEP</name>
            <description>Description cluster[n]: Channel n task end-point</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>TEP</name>
                <description>Pointer to task register. Accepts only addresses to registers from the Task group.</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <dim>0x6</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>CHG[%s]</name>
          <description>Description collection[n]: Channel group n</description>
          <addressOffset>0x800</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>CH0</name>
              <description>Include or exclude channel 0</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH1</name>
              <description>Include or exclude channel 1</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH2</name>
              <description>Include or exclude channel 2</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH3</name>
              <description>Include or exclude channel 3</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH4</name>
              <description>Include or exclude channel 4</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH5</name>
              <description>Include or exclude channel 5</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH6</name>
              <description>Include or exclude channel 6</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH7</name>
              <description>Include or exclude channel 7</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH8</name>
              <description>Include or exclude channel 8</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH9</name>
              <description>Include or exclude channel 9</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH10</name>
              <description>Include or exclude channel 10</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH11</name>
              <description>Include or exclude channel 11</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH12</name>
              <description>Include or exclude channel 12</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH13</name>
              <description>Include or exclude channel 13</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH14</name>
              <description>Include or exclude channel 14</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH15</name>
              <description>Include or exclude channel 15</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH16</name>
              <description>Include or exclude channel 16</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH17</name>
              <description>Include or exclude channel 17</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH18</name>
              <description>Include or exclude channel 18</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH19</name>
              <description>Include or exclude channel 19</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH20</name>
              <description>Include or exclude channel 20</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH21</name>
              <description>Include or exclude channel 21</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH22</name>
              <description>Include or exclude channel 22</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH23</name>
              <description>Include or exclude channel 23</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH24</name>
              <description>Include or exclude channel 24</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH25</name>
              <description>Include or exclude channel 25</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH26</name>
              <description>Include or exclude channel 26</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH27</name>
              <description>Include or exclude channel 27</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH28</name>
              <description>Include or exclude channel 28</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH29</name>
              <description>Include or exclude channel 29</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH30</name>
              <description>Include or exclude channel 30</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH31</name>
              <description>Include or exclude channel 31</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <dim>32</dim>
          <dimIncrement>0x004</dimIncrement>
          <name>FORK[%s]</name>
          <description>Fork</description>
          <headerStructName>PPI_FORK</headerStructName>
          <addressOffset>0x910</addressOffset>
          <register>
            <name>TEP</name>
            <description>Description cluster[n]: Channel n task end-point</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>TEP</name>
                <description>Pointer to task register</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
        </cluster>
      </registers>
    </peripheral>
    <peripheral>
      <name>P0</name>
      <description>GPIO Port</description>
      <baseAddress>0x50000000</baseAddress>
      <headerStructName>GPIO</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <groupName>GPIO</groupName>
      <size>0x20</size>
      <registers>
        <register>
          <name>OUT</name>
          <description>Write GPIO port</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>PIN0</name>
              <description>Pin 0</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN1</name>
              <description>Pin 1</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN2</name>
              <description>Pin 2</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN3</name>
              <description>Pin 3</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN4</name>
              <description>Pin 4</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN5</name>
              <description>Pin 5</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN6</name>
              <description>Pin 6</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN7</name>
              <description>Pin 7</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN8</name>
              <description>Pin 8</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN9</name>
              <description>Pin 9</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN10</name>
              <description>Pin 10</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN11</name>
              <description>Pin 11</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN12</name>
              <description>Pin 12</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN13</name>
              <description>Pin 13</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN14</name>
              <description>Pin 14</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN15</name>
              <description>Pin 15</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN16</name>
              <description>Pin 16</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN17</name>
              <description>Pin 17</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN18</name>
              <description>Pin 18</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN19</name>
              <description>Pin 19</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN20</name>
              <description>Pin 20</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN21</name>
              <description>Pin 21</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN22</name>
              <description>Pin 22</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN23</name>
              <description>Pin 23</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN24</name>
              <description>Pin 24</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN25</name>
              <description>Pin 25</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN26</name>
              <description>Pin 26</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN27</name>
              <description>Pin 27</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN28</name>
              <description>Pin 28</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN29</name>
              <description>Pin 29</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN30</name>
              <description>Pin 30</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN31</name>
              <description>Pin 31</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>OUTSET</name>
          <description>Set individual bits in GPIO port</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <modifiedWriteValues>oneToSet</modifiedWriteValues>
          <fields>
            <field>
              <name>PIN0</name>
              <description>Pin 0</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN1</name>
              <description>Pin 1</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN2</name>
              <description>Pin 2</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN3</name>
              <description>Pin 3</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN4</name>
              <description>Pin 4</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN5</name>
              <description>Pin 5</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN6</name>
              <description>Pin 6</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN7</name>
              <description>Pin 7</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN8</name>
              <description>Pin 8</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN9</name>
              <description>Pin 9</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN10</name>
              <description>Pin 10</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN11</name>
              <description>Pin 11</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN12</name>
              <description>Pin 12</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN13</name>
              <description>Pin 13</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN14</name>
              <description>Pin 14</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN15</name>
              <description>Pin 15</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN16</name>
              <description>Pin 16</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN17</name>
              <description>Pin 17</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN18</name>
              <description>Pin 18</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN19</name>
              <description>Pin 19</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN20</name>
              <description>Pin 20</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN21</name>
              <description>Pin 21</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN22</name>
              <description>Pin 22</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN23</name>
              <description>Pin 23</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN24</name>
              <description>Pin 24</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN25</name>
              <description>Pin 25</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN26</name>
              <description>Pin 26</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN27</name>
              <description>Pin 27</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN28</name>
              <description>Pin 28</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN29</name>
              <description>Pin 29</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN30</name>
              <description>Pin 30</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN31</name>
              <description>Pin 31</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>OUTCLR</name>
          <description>Clear individual bits in GPIO port</description>
          <addressOffset>0x50C</addressOffset>
          <access>read-write</access>
          <modifiedWriteValues>oneToClear</modifiedWriteValues>
          <fields>
            <field>
              <name>PIN0</name>
              <description>Pin 0</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN1</name>
              <description>Pin 1</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN2</name>
              <description>Pin 2</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN3</name>
              <description>Pin 3</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN4</name>
              <description>Pin 4</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN5</name>
              <description>Pin 5</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN6</name>
              <description>Pin 6</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN7</name>
              <description>Pin 7</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN8</name>
              <description>Pin 8</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN9</name>
              <description>Pin 9</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN10</name>
              <description>Pin 10</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN11</name>
              <description>Pin 11</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN12</name>
              <description>Pin 12</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN13</name>
              <description>Pin 13</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN14</name>
              <description>Pin 14</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN15</name>
              <description>Pin 15</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN16</name>
              <description>Pin 16</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN17</name>
              <description>Pin 17</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN18</name>
              <description>Pin 18</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN19</name>
              <description>Pin 19</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN20</name>
              <description>Pin 20</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN21</name>
              <description>Pin 21</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN22</name>
              <description>Pin 22</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN23</name>
              <description>Pin 23</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN24</name>
              <description>Pin 24</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN25</name>
              <description>Pin 25</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN26</name>
              <description>Pin 26</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN27</name>
              <description>Pin 27</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN28</name>
              <description>Pin 28</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN29</name>
              <description>Pin 29</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN30</name>
              <description>Pin 30</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN31</name>
              <description>Pin 31</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>IN</name>
          <description>Read GPIO port</description>
          <addressOffset>0x510</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>PIN0</name>
              <description>Pin 0</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN1</name>
              <description>Pin 1</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN2</name>
              <description>Pin 2</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN3</name>
              <description>Pin 3</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN4</name>
              <description>Pin 4</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN5</name>
              <description>Pin 5</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN6</name>
              <description>Pin 6</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN7</name>
              <description>Pin 7</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN8</name>
              <description>Pin 8</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN9</name>
              <description>Pin 9</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN10</name>
              <description>Pin 10</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN11</name>
              <description>Pin 11</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN12</name>
              <description>Pin 12</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN13</name>
              <description>Pin 13</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN14</name>
              <description>Pin 14</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN15</name>
              <description>Pin 15</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN16</name>
              <description>Pin 16</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN17</name>
              <description>Pin 17</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN18</name>
              <description>Pin 18</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN19</name>
              <description>Pin 19</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN20</name>
              <description>Pin 20</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN21</name>
              <description>Pin 21</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN22</name>
              <description>Pin 22</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN23</name>
              <description>Pin 23</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN24</name>
              <description>Pin 24</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN25</name>
              <description>Pin 25</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN26</name>
              <description>Pin 26</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN27</name>
              <description>Pin 27</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN28</name>
              <description>Pin 28</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN29</name>
              <description>Pin 29</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN30</name>
              <description>Pin 30</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN31</name>
              <description>Pin 31</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>DIR</name>
          <description>Direction of GPIO pins</description>
          <addressOffset>0x514</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>PIN0</name>
              <description>Pin 0</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN1</name>
              <description>Pin 1</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN2</name>
              <description>Pin 2</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN3</name>
              <description>Pin 3</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN4</name>
              <description>Pin 4</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN5</name>
              <description>Pin 5</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN6</name>
              <description>Pin 6</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN7</name>
              <description>Pin 7</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN8</name>
              <description>Pin 8</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN9</name>
              <description>Pin 9</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN10</name>
              <description>Pin 10</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN11</name>
              <description>Pin 11</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN12</name>
              <description>Pin 12</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN13</name>
              <description>Pin 13</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN14</name>
              <description>Pin 14</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN15</name>
              <description>Pin 15</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN16</name>
              <description>Pin 16</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN17</name>
              <description>Pin 17</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN18</name>
              <description>Pin 18</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN19</name>
              <description>Pin 19</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN20</name>
              <description>Pin 20</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN21</name>
              <description>Pin 21</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN22</name>
              <description>Pin 22</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN23</name>
              <description>Pin 23</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN24</name>
              <description>Pin 24</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN25</name>
              <description>Pin 25</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN26</name>
              <description>Pin 26</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN27</name>
              <description>Pin 27</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN28</name>
              <description>Pin 28</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN29</name>
              <description>Pin 29</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN30</name>
              <description>Pin 30</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN31</name>
              <description>Pin 31</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>DIRSET</name>
          <description>DIR set register</description>
          <addressOffset>0x518</addressOffset>
          <access>read-write</access>
          <modifiedWriteValues>oneToSet</modifiedWriteValues>
          <fields>
            <field>
              <name>PIN0</name>
              <description>Set as output pin 0</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN1</name>
              <description>Set as output pin 1</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN2</name>
              <description>Set as output pin 2</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN3</name>
              <description>Set as output pin 3</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN4</name>
              <description>Set as output pin 4</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN5</name>
              <description>Set as output pin 5</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN6</name>
              <description>Set as output pin 6</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN7</name>
              <description>Set as output pin 7</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN8</name>
              <description>Set as output pin 8</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN9</name>
              <description>Set as output pin 9</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN10</name>
              <description>Set as output pin 10</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN11</name>
              <description>Set as output pin 11</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN12</name>
              <description>Set as output pin 12</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN13</name>
              <description>Set as output pin 13</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN14</name>
              <description>Set as output pin 14</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN15</name>
              <description>Set as output pin 15</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN16</name>
              <description>Set as output pin 16</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN17</name>
              <description>Set as output pin 17</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN18</name>
              <description>Set as output pin 18</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN19</name>
              <description>Set as output pin 19</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN20</name>
              <description>Set as output pin 20</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN21</name>
              <description>Set as output pin 21</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN22</name>
              <description>Set as output pin 22</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN23</name>
              <description>Set as output pin 23</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN24</name>
              <description>Set as output pin 24</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN25</name>
              <description>Set as output pin 25</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN26</name>
              <description>Set as output pin 26</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN27</name>
              <description>Set as output pin 27</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN28</name>
              <description>Set as output pin 28</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN29</name>
              <description>Set as output pin 29</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN30</name>
              <description>Set as output pin 30</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN31</name>
              <description>Set as output pin 31</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>DIRCLR</name>
          <description>DIR clear register</description>
          <addressOffset>0x51C</addressOffset>
          <access>read-write</access>
          <modifiedWriteValues>oneToClear</modifiedWriteValues>
          <fields>
            <field>
              <name>PIN0</name>
              <description>Set as input pin 0</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN1</name>
              <description>Set as input pin 1</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN2</name>
              <description>Set as input pin 2</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN3</name>
              <description>Set as input pin 3</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN4</name>
              <description>Set as input pin 4</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN5</name>
              <description>Set as input pin 5</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN6</name>
              <description>Set as input pin 6</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN7</name>
              <description>Set as input pin 7</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN8</name>
              <description>Set as input pin 8</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN9</name>
              <description>Set as input pin 9</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN10</name>
              <description>Set as input pin 10</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN11</name>
              <description>Set as input pin 11</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN12</name>
              <description>Set as input pin 12</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN13</name>
              <description>Set as input pin 13</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN14</name>
              <description>Set as input pin 14</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN15</name>
              <description>Set as input pin 15</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN16</name>
              <description>Set as input pin 16</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN17</name>
              <description>Set as input pin 17</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN18</name>
              <description>Set as input pin 18</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN19</name>
              <description>Set as input pin 19</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN20</name>
              <description>Set as input pin 20</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN21</name>
              <description>Set as input pin 21</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN22</name>
              <description>Set as input pin 22</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN23</name>
              <description>Set as input pin 23</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN24</name>
              <description>Set as input pin 24</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN25</name>
              <description>Set as input pin 25</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN26</name>
              <description>Set as input pin 26</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN27</name>
              <description>Set as input pin 27</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN28</name>
              <description>Set as input pin 28</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN29</name>
              <description>Set as input pin 29</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN30</name>
              <description>Set as input pin 30</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN31</name>
              <description>Set as input pin 31</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>LATCH</name>
          <description>Latch register indicating what GPIO pins that have met the criteria set in the PIN_CNF[n].SENSE registers</description>
          <addressOffset>0x520</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>PIN0</name>
              <description>Status on whether PIN0 has met criteria set in PIN_CNF0.SENSE register. Write '1' to clear.</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN1</name>
              <description>Status on whether PIN1 has met criteria set in PIN_CNF1.SENSE register. Write '1' to clear.</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN2</name>
              <description>Status on whether PIN2 has met criteria set in PIN_CNF2.SENSE register. Write '1' to clear.</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN3</name>
              <description>Status on whether PIN3 has met criteria set in PIN_CNF3.SENSE register. Write '1' to clear.</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN4</name>
              <description>Status on whether PIN4 has met criteria set in PIN_CNF4.SENSE register. Write '1' to clear.</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN5</name>
              <description>Status on whether PIN5 has met criteria set in PIN_CNF5.SENSE register. Write '1' to clear.</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN6</name>
              <description>Status on whether PIN6 has met criteria set in PIN_CNF6.SENSE register. Write '1' to clear.</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN7</name>
              <description>Status on whether PIN7 has met criteria set in PIN_CNF7.SENSE register. Write '1' to clear.</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN8</name>
              <description>Status on whether PIN8 has met criteria set in PIN_CNF8.SENSE register. Write '1' to clear.</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN9</name>
              <description>Status on whether PIN9 has met criteria set in PIN_CNF9.SENSE register. Write '1' to clear.</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN10</name>
              <description>Status on whether PIN10 has met criteria set in PIN_CNF10.SENSE register. Write '1' to clear.</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN11</name>
              <description>Status on whether PIN11 has met criteria set in PIN_CNF11.SENSE register. Write '1' to clear.</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN12</name>
              <description>Status on whether PIN12 has met criteria set in PIN_CNF12.SENSE register. Write '1' to clear.</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN13</name>
              <description>Status on whether PIN13 has met criteria set in PIN_CNF13.SENSE register. Write '1' to clear.</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN14</name>
              <description>Status on whether PIN14 has met criteria set in PIN_CNF14.SENSE register. Write '1' to clear.</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN15</name>
              <description>Status on whether PIN15 has met criteria set in PIN_CNF15.SENSE register. Write '1' to clear.</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN16</name>
              <description>Status on whether PIN16 has met criteria set in PIN_CNF16.SENSE register. Write '1' to clear.</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN17</name>
              <description>Status on whether PIN17 has met criteria set in PIN_CNF17.SENSE register. Write '1' to clear.</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN18</name>
              <description>Status on whether PIN18 has met criteria set in PIN_CNF18.SENSE register. Write '1' to clear.</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN19</name>
              <description>Status on whether PIN19 has met criteria set in PIN_CNF19.SENSE register. Write '1' to clear.</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN20</name>
              <description>Status on whether PIN20 has met criteria set in PIN_CNF20.SENSE register. Write '1' to clear.</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN21</name>
              <description>Status on whether PIN21 has met criteria set in PIN_CNF21.SENSE register. Write '1' to clear.</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN22</name>
              <description>Status on whether PIN22 has met criteria set in PIN_CNF22.SENSE register. Write '1' to clear.</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN23</name>
              <description>Status on whether PIN23 has met criteria set in PIN_CNF23.SENSE register. Write '1' to clear.</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN24</name>
              <description>Status on whether PIN24 has met criteria set in PIN_CNF24.SENSE register. Write '1' to clear.</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN25</name>
              <description>Status on whether PIN25 has met criteria set in PIN_CNF25.SENSE register. Write '1' to clear.</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN26</name>
              <description>Status on whether PIN26 has met criteria set in PIN_CNF26.SENSE register. Write '1' to clear.</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN27</name>
              <description>Status on whether PIN27 has met criteria set in PIN_CNF27.SENSE register. Write '1' to clear.</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN28</name>
              <description>Status on whether PIN28 has met criteria set in PIN_CNF28.SENSE register. Write '1' to clear.</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN29</name>
              <description>Status on whether PIN29 has met criteria set in PIN_CNF29.SENSE register. Write '1' to clear.</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN30</name>
              <description>Status on whether PIN30 has met criteria set in PIN_CNF30.SENSE register. Write '1' to clear.</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN31</name>
              <description>Status on whether PIN31 has met criteria set in PIN_CNF31.SENSE register. Write '1' to clear.</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>DETECTMODE</name>
          <description>Select between default DETECT signal behaviour and LDETECT mode</description>
          <addressOffset>0x524</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>DETECTMODE</name>
              <description>Select between default DETECT signal behaviour and LDETECT mode</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Default</name>
                  <description>DETECT directly connected to PIN DETECT signals</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LDETECT</name>
                  <description>Use the latched LDETECT behaviour</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <dim>0x20</dim>
          <dimIncrement>0x4</dimIncrement>
          <name>PIN_CNF[%s]</name>
          <description>Description collection[n]: Configuration of GPIO pins</description>
          <addressOffset>0x700</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000002</resetValue>
          <fields>
            <field>
              <name>DIR</name>
              <description>Pin direction. Same physical register as DIR register</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Configure pin as an input pin</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Configure pin as an output pin</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>INPUT</name>
              <description>Connect or disconnect input buffer</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Connect</name>
                  <description>Connect input buffer</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Disconnect</name>
                  <description>Disconnect input buffer</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PULL</name>
              <description>Pull configuration</description>
              <lsb>2</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>No pull</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Pulldown</name>
                  <description>Pull down on pin</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Pullup</name>
                  <description>Pull up on pin</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DRIVE</name>
              <description>Drive configuration</description>
              <lsb>8</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>S0S1</name>
                  <description>Standard '0', standard '1'</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>H0S1</name>
                  <description>High drive '0', standard '1'</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>S0H1</name>
                  <description>Standard '0', high drive '1'</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>H0H1</name>
                  <description>High drive '0', high 'drive '1''</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>D0S1</name>
                  <description>Disconnect '0' standard '1' (normally used for wired-or connections)</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>D0H1</name>
                  <description>Disconnect '0', high drive '1' (normally used for wired-or connections)</description>
                  <value>5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>S0D1</name>
                  <description>Standard '0'. disconnect '1' (normally used for wired-and connections)</description>
                  <value>6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>H0D1</name>
                  <description>High drive '0', disconnect '1' (normally used for wired-and connections)</description>
                  <value>7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SENSE</name>
              <description>Pin sensing mechanism</description>
              <lsb>16</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Sense for high level</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Sense for low level</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
  </peripherals>
</device>