12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697 |
- /**
- * Copyright (c) 2020, Nordic Semiconductor ASA
- *
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice, this
- * list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form, except as embedded into a Nordic
- * Semiconductor ASA integrated circuit in a product or a software update for
- * such product, must reproduce the above copyright notice, this list of
- * conditions and the following disclaimer in the documentation and/or other
- * materials provided with the distribution.
- *
- * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
- * contributors may be used to endorse or promote products derived from this
- * software without specific prior written permission.
- *
- * 4. This software, with or without modification, must only be used with a
- * Nordic Semiconductor ASA integrated circuit.
- *
- * 5. Any software provided in binary form under this license must not be reverse
- * engineered, decompiled, modified and/or disassembled.
- *
- * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
- * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
- * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
- #ifndef NRF21540_GPIO_H_
- #define NRF21540_GPIO_H_
- #include "nrf_gpio.h"
- #include "nrf21540_types.h"
- #ifdef __cplusplus
- extern "C" {
- #endif
- /**@brief Function initializes GPIO interface.
- */
- void nrf21540_gpio_init(void);
- /**@brief Function choses one of two physical antenna outputs.
- *
- * @param[in] antenna one of antenna outputs. See @ref nrf21540_antenna_t.
- * @return NRF_ERROR_INVALID_PARAM when invalid argument given.
- * NRF_SUCCESS on success.
- */
- ret_code_t nrf21540_gpio_ant_set(nrf21540_antenna_t antenna);
- #if NRF21540_USE_GPIO_MANAGEMENT
- /**@brief Function returns address of task which triggers RX_EN/TX_EN pin
- * to set nRF21540 radio trasfer direction.
- *
- * @param[in] dir Direction of the radio transmission. See @ref nrf21540_trx_t.
- * @param[in] required_state State of RX/TX transfer. See @ref nrf21540_bool_state_t.
- * @return Address of appropriate task.
- */
- uint32_t nrf21540_gpio_trx_task_start_address_get(nrf21540_trx_t dir,
- nrf21540_bool_state_t required_state);
- /**@brief Function configures the chip and peripherals for TX/RX transfer purpose.
- *
- * @details enables/disables RX/TX transfers.
- *
- * @param[in] dir direction of radio transfer. See @ref nrf21540_trx_t.
- */
- void nrf21540_gpio_trx_enable(nrf21540_trx_t dir);
- /**@brief Function choses one of two predefined power modes in nRF21540.
- *
- * @details Refer to nRF21540 Objective Product Specification, section: TX power control.
- *
- * @param[in] mode Power mode. See @ref nrf21540_pwr_mode_t.
- * @return NRF_ERROR_INVALID_PARAM when invalid argument given.
- * NRF_SUCCESS on success.
- */
- ret_code_t nrf21540_gpio_pwr_mode_set(nrf21540_pwr_mode_t mode);
- #endif /*NRF21540_USE_GPIO_MANAGEMENT*/
- #ifdef __cplusplus
- }
- #endif
- #endif // NRF21540_GPIO_H_
|