ser_conn_cmd_decoder.c 5.2 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138
  1. /**
  2. * Copyright (c) 2014 - 2018, Nordic Semiconductor ASA
  3. *
  4. * All rights reserved.
  5. *
  6. * Redistribution and use in source and binary forms, with or without modification,
  7. * are permitted provided that the following conditions are met:
  8. *
  9. * 1. Redistributions of source code must retain the above copyright notice, this
  10. * list of conditions and the following disclaimer.
  11. *
  12. * 2. Redistributions in binary form, except as embedded into a Nordic
  13. * Semiconductor ASA integrated circuit in a product or a software update for
  14. * such product, must reproduce the above copyright notice, this list of
  15. * conditions and the following disclaimer in the documentation and/or other
  16. * materials provided with the distribution.
  17. *
  18. * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
  19. * contributors may be used to endorse or promote products derived from this
  20. * software without specific prior written permission.
  21. *
  22. * 4. This software, with or without modification, must only be used with a
  23. * Nordic Semiconductor ASA integrated circuit.
  24. *
  25. * 5. Any software provided in binary form under this license must not be reverse
  26. * engineered, decompiled, modified and/or disassembled.
  27. *
  28. * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
  29. * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  30. * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
  31. * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
  32. * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  33. * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
  34. * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  35. * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  36. * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
  37. * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  38. *
  39. */
  40. #include <stdint.h>
  41. #include <string.h>
  42. #include "nordic_common.h"
  43. #include "app_error.h"
  44. #include "ble_serialization.h"
  45. #include "ser_config.h"
  46. #include "conn_mw.h"
  47. #include "ser_hal_transport.h"
  48. #include "ser_conn_cmd_decoder.h"
  49. #include "ser_conn_handlers.h"
  50. #include "nrf_log_ctrl.h"
  51. #define NRF_LOG_MODULE_NAME ser_conn_dec
  52. #include "nrf_log.h"
  53. NRF_LOG_MODULE_REGISTER();
  54. uint32_t ser_conn_command_process(uint8_t * p_command, uint16_t command_len)
  55. {
  56. SER_ASSERT_NOT_NULL(p_command);
  57. SER_ASSERT_LENGTH_LEQ(SER_OP_CODE_SIZE, command_len);
  58. uint32_t err_code = NRF_SUCCESS;
  59. uint8_t * p_tx_buf = NULL;
  60. uint32_t tx_buf_len = 0;
  61. uint8_t opcode = p_command[SER_CMD_OP_CODE_POS];
  62. uint32_t index = 0;
  63. /* Allocate a memory buffer from HAL Transport layer for transmitting the Command Response.
  64. * Loop until a buffer is available. */
  65. NRF_LOG_INFO("Command process start");
  66. do
  67. {
  68. err_code = ser_hal_transport_tx_pkt_alloc(&p_tx_buf, (uint16_t *)&tx_buf_len);
  69. if (err_code == NRF_ERROR_NO_MEM)
  70. {
  71. ser_conn_on_no_mem_handler();
  72. }
  73. }
  74. while (NRF_ERROR_NO_MEM == err_code);
  75. NRF_LOG_INFO("Tx buffer allocated");
  76. if (NRF_SUCCESS == err_code)
  77. {
  78. /* Create a new response packet. */
  79. p_tx_buf[SER_PKT_TYPE_POS] = SER_PKT_TYPE_RESP;
  80. tx_buf_len -= SER_PKT_TYPE_SIZE;
  81. /* Decode a request, pass a memory for a response command (opcode + data) and encode it. */
  82. err_code = conn_mw_handler
  83. (p_command, command_len, &p_tx_buf[SER_PKT_OP_CODE_POS], &tx_buf_len);
  84. /* Command decoder not found. */
  85. if (NRF_ERROR_NOT_SUPPORTED == err_code)
  86. {
  87. NRF_LOG_ERROR("Command not supported opcode:%d", p_tx_buf[SER_PKT_OP_CODE_POS]);
  88. APP_ERROR_CHECK(SER_WARNING_CODE);
  89. err_code = op_status_enc
  90. (opcode, NRF_ERROR_NOT_SUPPORTED,
  91. &p_tx_buf[SER_PKT_OP_CODE_POS], &tx_buf_len, &index);
  92. if (NRF_SUCCESS == err_code)
  93. {
  94. tx_buf_len += SER_PKT_TYPE_SIZE;
  95. err_code = ser_hal_transport_tx_pkt_send(p_tx_buf, (uint16_t)tx_buf_len);
  96. /* TX buffer is going to be freed automatically in the HAL Transport layer. */
  97. if (NRF_SUCCESS != err_code)
  98. {
  99. err_code = NRF_ERROR_INTERNAL;
  100. }
  101. }
  102. else
  103. {
  104. err_code = NRF_ERROR_INTERNAL;
  105. }
  106. }
  107. else if (NRF_SUCCESS == err_code) /* Send a response. */
  108. {
  109. tx_buf_len += SER_PKT_TYPE_SIZE;
  110. err_code = ser_hal_transport_tx_pkt_send(p_tx_buf, (uint16_t)tx_buf_len);
  111. /* TX buffer is going to be freed automatically in the HAL Transport layer. */
  112. if (NRF_SUCCESS != err_code)
  113. {
  114. err_code = NRF_ERROR_INTERNAL;
  115. }
  116. }
  117. else
  118. {
  119. NRF_LOG_ERROR("Internal error during command decoding.");
  120. err_code = NRF_ERROR_INTERNAL;
  121. }
  122. }
  123. else
  124. {
  125. err_code = NRF_ERROR_INTERNAL;
  126. }
  127. return err_code;
  128. }