123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401 |
- /**
- * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
- *
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice, this
- * list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form, except as embedded into a Nordic
- * Semiconductor ASA integrated circuit in a product or a software update for
- * such product, must reproduce the above copyright notice, this list of
- * conditions and the following disclaimer in the documentation and/or other
- * materials provided with the distribution.
- *
- * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
- * contributors may be used to endorse or promote products derived from this
- * software without specific prior written permission.
- *
- * 4. This software, with or without modification, must only be used with a
- * Nordic Semiconductor ASA integrated circuit.
- *
- * 5. Any software provided in binary form under this license must not be reverse
- * engineered, decompiled, modified and/or disassembled.
- *
- * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
- * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
- * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
- #include "sdk_common.h"
- #if NRF_MODULE_ENABLED(ILI9341)
- #include "nrf_lcd.h"
- #include "nrf_drv_spi.h"
- #include "nrf_delay.h"
- #include "nrf_gpio.h"
- #include "boards.h"
- // Set of commands described in ILI9341 datasheet.
- #define ILI9341_NOP 0x00
- #define ILI9341_SWRESET 0x01
- #define ILI9341_RDDID 0x04
- #define ILI9341_RDDST 0x09
- #define ILI9341_SLPIN 0x10
- #define ILI9341_SLPOUT 0x11
- #define ILI9341_PTLON 0x12
- #define ILI9341_NORON 0x13
- #define ILI9341_RDMODE 0x0A
- #define ILI9341_RDMADCTL 0x0B
- #define ILI9341_RDPIXFMT 0x0C
- #define ILI9341_RDIMGFMT 0x0D
- #define ILI9341_RDSELFDIAG 0x0F
- #define ILI9341_INVOFF 0x20
- #define ILI9341_INVON 0x21
- #define ILI9341_GAMMASET 0x26
- #define ILI9341_DISPOFF 0x28
- #define ILI9341_DISPON 0x29
- #define ILI9341_CASET 0x2A
- #define ILI9341_PASET 0x2B
- #define ILI9341_RAMWR 0x2C
- #define ILI9341_RAMRD 0x2E
- #define ILI9341_PTLAR 0x30
- #define ILI9341_MADCTL 0x36
- #define ILI9341_PIXFMT 0x3A
- #define ILI9341_FRMCTR1 0xB1
- #define ILI9341_FRMCTR2 0xB2
- #define ILI9341_FRMCTR3 0xB3
- #define ILI9341_INVCTR 0xB4
- #define ILI9341_DFUNCTR 0xB6
- #define ILI9341_PWCTR1 0xC0
- #define ILI9341_PWCTR2 0xC1
- #define ILI9341_PWCTR3 0xC2
- #define ILI9341_PWCTR4 0xC3
- #define ILI9341_PWCTR5 0xC4
- #define ILI9341_VMCTR1 0xC5
- #define ILI9341_VMCTR2 0xC7
- #define ILI9341_PWCTRSEQ 0xCB
- #define ILI9341_PWCTRA 0xCD
- #define ILI9341_PWCTRB 0xCF
- #define ILI9341_RDID1 0xDA
- #define ILI9341_RDID2 0xDB
- #define ILI9341_RDID3 0xDC
- #define ILI9341_RDID4 0xDD
- #define ILI9341_GMCTRP1 0xE0
- #define ILI9341_GMCTRN1 0xE1
- #define ILI9341_DGMCTR1 0xE2
- #define ILI9341_DGMCTR2 0xE3
- #define ILI9341_TIMCTRA 0xE8
- #define ILI9341_TIMCTRB 0xEA
- #define ILI9341_ENGMCTR 0xF2
- #define ILI9341_INCTR 0xF6
- #define ILI9341_PUMP 0xF7
- #define ILI9341_MADCTL_MY 0x80
- #define ILI9341_MADCTL_MX 0x40
- #define ILI9341_MADCTL_MV 0x20
- #define ILI9341_MADCTL_ML 0x10
- #define ILI9341_MADCTL_RGB 0x00
- #define ILI9341_MADCTL_BGR 0x08
- #define ILI9341_MADCTL_MH 0x04
- static const nrf_drv_spi_t spi = NRF_DRV_SPI_INSTANCE(ILI9341_SPI_INSTANCE);
- static inline void spi_write(const void * data, size_t size)
- {
- APP_ERROR_CHECK(nrf_drv_spi_transfer(&spi, data, size, NULL, 0));
- }
- static inline void write_command(uint8_t c)
- {
- nrf_gpio_pin_clear(ILI9341_DC_PIN);
- spi_write(&c, sizeof(c));
- }
- static inline void write_data(uint8_t c)
- {
- nrf_gpio_pin_set(ILI9341_DC_PIN);
- spi_write(&c, sizeof(c));
- }
- static void set_addr_window(uint16_t x_0, uint16_t y_0, uint16_t x_1, uint16_t y_1)
- {
- ASSERT(x_0 <= x_1);
- ASSERT(y_0 <= y_1);
- write_command(ILI9341_CASET);
- write_data(x_0 >> 8);
- write_data(x_0);
- write_data(x_1 >> 8);
- write_data(x_1);
- write_command(ILI9341_PASET);
- write_data(y_0 >> 8);
- write_data(y_0);
- write_data(y_1 >> 8);
- write_data(y_1);
- write_command(ILI9341_RAMWR);
- }
- static void command_list(void)
- {
- write_command(ILI9341_SWRESET);
- nrf_delay_ms(120);
- write_command(ILI9341_DISPOFF);
- nrf_delay_ms(120);
- write_command(ILI9341_PWCTRB);
- write_data(0x00);
- write_data(0XC1);
- write_data(0X30);
- write_command(ILI9341_TIMCTRA);
- write_data(0x85);
- write_data(0x00);
- write_data(0x78);
- write_command(ILI9341_PWCTRSEQ);
- write_data(0x39);
- write_data(0x2C);
- write_data(0x00);
- write_data(0x34);
- write_data(0x02);
- write_command(ILI9341_PUMP);
- write_data(0x20);
- write_command(ILI9341_TIMCTRB);
- write_data(0x00);
- write_data(0x00);
- write_command(ILI9341_PWCTR1);
- write_data(0x23);
- write_command(ILI9341_PWCTR2);
- write_data(0x10);
- write_command(ILI9341_VMCTR1);
- write_data(0x3e);
- write_data(0x28);
- write_command(ILI9341_VMCTR2);
- write_data(0x86);
- write_command(ILI9341_MADCTL);
- write_data(0x48);
- write_command(ILI9341_PIXFMT);
- write_data(0x55);
- write_command(ILI9341_FRMCTR1);
- write_data(0x00);
- write_data(0x18);
- write_command(ILI9341_DFUNCTR);
- write_data(0x08);
- write_data(0x82);
- write_data(0x27);
- write_command(ILI9341_ENGMCTR);
- write_data(0x00);
- write_command(ILI9341_GAMMASET);
- write_data(0x01);
- write_command(ILI9341_GMCTRP1);
- write_data(0x0F);
- write_data(0x31);
- write_data(0x2B);
- write_data(0x0C);
- write_data(0x0E);
- write_data(0x08);
- write_data(0x4E);
- write_data(0xF1);
- write_data(0x37);
- write_data(0x07);
- write_data(0x10);
- write_data(0x03);
- write_data(0x0E);
- write_data(0x09);
- write_data(0x00);
- write_command(ILI9341_GMCTRN1);
- write_data(0x00);
- write_data(0x0E);
- write_data(0x14);
- write_data(0x03);
- write_data(0x11);
- write_data(0x07);
- write_data(0x31);
- write_data(0xC1);
- write_data(0x48);
- write_data(0x08);
- write_data(0x0F);
- write_data(0x0C);
- write_data(0x31);
- write_data(0x36);
- write_data(0x0F);
- write_command(ILI9341_SLPOUT);
- nrf_delay_ms(120);
- write_command(ILI9341_DISPON);
- }
- static ret_code_t hardware_init(void)
- {
- ret_code_t err_code;
- nrf_gpio_cfg_output(ILI9341_DC_PIN);
- nrf_drv_spi_config_t spi_config = NRF_DRV_SPI_DEFAULT_CONFIG;
- spi_config.sck_pin = ILI9341_SCK_PIN;
- spi_config.miso_pin = ILI9341_MISO_PIN;
- spi_config.mosi_pin = ILI9341_MOSI_PIN;
- spi_config.ss_pin = ILI9341_SS_PIN;
- err_code = nrf_drv_spi_init(&spi, &spi_config, NULL, NULL);
- return err_code;
- }
- static ret_code_t ili9341_init(void)
- {
- ret_code_t err_code;
- err_code = hardware_init();
- if (err_code != NRF_SUCCESS)
- {
- return err_code;
- }
- command_list();
- return err_code;
- }
- static void ili9341_uninit(void)
- {
- nrf_drv_spi_uninit(&spi);
- }
- static void ili9341_pixel_draw(uint16_t x, uint16_t y, uint32_t color)
- {
- set_addr_window(x, y, x, y);
- const uint8_t data[2] = {color >> 8, color};
- nrf_gpio_pin_set(ILI9341_DC_PIN);
- spi_write(data, sizeof(data));
- nrf_gpio_pin_clear(ILI9341_DC_PIN);
- }
- static void ili9341_rect_draw(uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint32_t color)
- {
- set_addr_window(x, y, x + width - 1, y + height - 1);
- const uint8_t data[2] = {color >> 8, color};
- nrf_gpio_pin_set(ILI9341_DC_PIN);
- // Duff's device algorithm for optimizing loop.
- uint32_t i = (height * width + 7) / 8;
- /*lint -save -e525 -e616 -e646 */
- switch ((height * width) % 8) {
- case 0:
- do {
- spi_write(data, sizeof(data));
- case 7:
- spi_write(data, sizeof(data));
- case 6:
- spi_write(data, sizeof(data));
- case 5:
- spi_write(data, sizeof(data));
- case 4:
- spi_write(data, sizeof(data));
- case 3:
- spi_write(data, sizeof(data));
- case 2:
- spi_write(data, sizeof(data));
- case 1:
- spi_write(data, sizeof(data));
- } while (--i > 0);
- default:
- break;
- }
- /*lint -restore */
- nrf_gpio_pin_clear(ILI9341_DC_PIN);
- }
- static void ili9341_dummy_display(void)
- {
- /* No implementation needed. */
- }
- static void ili9341_rotation_set(nrf_lcd_rotation_t rotation)
- {
- write_command(ILI9341_MADCTL);
- switch (rotation) {
- case NRF_LCD_ROTATE_0:
- write_data(ILI9341_MADCTL_MX | ILI9341_MADCTL_BGR);
- break;
- case NRF_LCD_ROTATE_90:
- write_data(ILI9341_MADCTL_MV | ILI9341_MADCTL_BGR);
- break;
- case NRF_LCD_ROTATE_180:
- write_data(ILI9341_MADCTL_MY | ILI9341_MADCTL_BGR);
- break;
- case NRF_LCD_ROTATE_270:
- write_data(ILI9341_MADCTL_MX | ILI9341_MADCTL_MY | ILI9341_MADCTL_MV | ILI9341_MADCTL_BGR);
- break;
- default:
- break;
- }
- }
- static void ili9341_display_invert(bool invert)
- {
- write_command(invert ? ILI9341_INVON : ILI9341_INVOFF);
- }
- static lcd_cb_t ili9341_cb = {
- .height = ILI9341_HEIGHT,
- .width = ILI9341_WIDTH
- };
- const nrf_lcd_t nrf_lcd_ili9341 = {
- .lcd_init = ili9341_init,
- .lcd_uninit = ili9341_uninit,
- .lcd_pixel_draw = ili9341_pixel_draw,
- .lcd_rect_draw = ili9341_rect_draw,
- .lcd_display = ili9341_dummy_display,
- .lcd_rotation_set = ili9341_rotation_set,
- .lcd_display_invert = ili9341_display_invert,
- .p_lcd_cb = &ili9341_cb
- };
- #endif // NRF_MODULE_ENABLED(ILI9341)
|