/**
 * Copyright (c) 2017 - 2020, Nordic Semiconductor ASA
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice, this
 *    list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form, except as embedded into a Nordic
 *    Semiconductor ASA integrated circuit in a product or a software update for
 *    such product, must reproduce the above copyright notice, this list of
 *    conditions and the following disclaimer in the documentation and/or other
 *    materials provided with the distribution.
 *
 * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
 *    contributors may be used to endorse or promote products derived from this
 *    software without specific prior written permission.
 *
 * 4. This software, with or without modification, must only be used with a
 *    Nordic Semiconductor ASA integrated circuit.
 *
 * 5. Any software provided in binary form under this license must not be reverse
 *    engineered, decompiled, modified and/or disassembled.
 *
 * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */

#ifndef NRFX_POWER_H__
#define NRFX_POWER_H__

#include <nrfx.h>
#include <hal/nrf_power.h>
#include <nrfx_power_clock.h>

#ifdef __cplusplus
extern "C" {
#endif

/**
 * @defgroup nrfx_power POWER driver
 * @{
 * @ingroup nrf_power
 * @brief   POWER peripheral driver.
 */

/**
 * @brief Power mode possible configurations
 */
typedef enum
{
    NRFX_POWER_MODE_CONSTLAT, /**< Constant latency mode */
    NRFX_POWER_MODE_LOWPWR    /**< Low power mode        */
}nrfx_power_mode_t;

#if NRF_POWER_HAS_SLEEPEVT || defined(__NRFX_DOXYGEN__)
/**
 * @brief Events from power system
 */
typedef enum
{
    NRFX_POWER_SLEEP_EVT_ENTER, /**< CPU entered WFI/WFE sleep
                                 *
                                 * Keep in mind that if this interrupt is enabled,
                                 * it means that CPU was waken up just after WFI by this interrupt.
                                 */
    NRFX_POWER_SLEEP_EVT_EXIT   /**< CPU exited WFI/WFE sleep */
}nrfx_power_sleep_evt_t;
#endif /* NRF_POWER_HAS_SLEEPEVT */

#if NRF_POWER_HAS_USBREG || defined(__NRFX_DOXYGEN__)
/**
 * @brief Events from USB power system
 */
typedef enum
{
    NRFX_POWER_USB_EVT_DETECTED, /**< USB power detected on the connector (plugged in). */
    NRFX_POWER_USB_EVT_REMOVED,  /**< USB power removed from the connector. */
    NRFX_POWER_USB_EVT_READY     /**< USB power regulator ready. */
}nrfx_power_usb_evt_t;

/**
 * @brief USB power state
 *
 * The single enumerator that holds all data about current state of USB
 * related POWER.
 *
 * Organized this way that higher power state has higher numeric value
 */
typedef enum
{
    NRFX_POWER_USB_STATE_DISCONNECTED, /**< No power on USB lines detected. */
    NRFX_POWER_USB_STATE_CONNECTED,    /**< The USB power is detected, but USB power regulator is not ready. */
    NRFX_POWER_USB_STATE_READY         /**< From the power viewpoint, USB is ready for working. */
}nrfx_power_usb_state_t;
#endif /* NRF_POWER_HAS_USBREG */

/**
 * @name Callback types
 *
 * Defined types of callback functions.
 * @{
 */
/**
 * @brief Event handler for power failure warning.
 */
typedef void (*nrfx_power_pofwarn_event_handler_t)(void);

#if NRF_POWER_HAS_SLEEPEVT || defined(__NRFX_DOXYGEN__)
/**
 * @brief Event handler for the sleep events.
 *
 * @param event Event type
 */
typedef void (*nrfx_power_sleep_event_handler_t)(nrfx_power_sleep_evt_t event);
#endif

#if NRF_POWER_HAS_USBREG || defined(__NRFX_DOXYGEN__)
/**
 * @brief Event handler for the USB-related power events.
 *
 * @param event Event type
 */
typedef void (*nrfx_power_usb_event_handler_t)(nrfx_power_usb_evt_t event);
#endif
/** @} */

/**
 * @brief General power configuration
 *
 * Parameters required to initialize power driver.
 */
typedef struct
{
    /**
     * @brief Enable main DCDC regulator.
     *
     * This bit only informs the driver that elements for DCDC regulator
     * are installed and the regulator can be used.
     * The regulator will be enabled or disabled automatically
     * by the hardware, basing on current power requirement.
     */
    bool dcdcen:1;

#if NRF_POWER_HAS_VDDH || defined(__NRFX_DOXYGEN__)
    /**
     * @brief Enable HV DCDC regulator.
     *
     * This bit only informs the driver that elements for DCDC regulator
     * are installed and the regulator can be used.
     * The regulator will be enabled or disabled automatically
     * by the hardware, basing on current power requirement.
     */
    bool dcdcenhv: 1;
#endif
}nrfx_power_config_t;

/**
 * @brief The configuration for power failure comparator.
 *
 * Configuration used to enable and configure the power failure comparator.
 */
typedef struct
{
    nrfx_power_pofwarn_event_handler_t handler; //!< Event handler.
#if NRF_POWER_HAS_POFCON || defined(__NRFX_DOXYGEN__)
    nrf_power_pof_thr_t                thr;     //!< Threshold for power failure detection
#endif
#if NRF_POWER_HAS_VDDH || defined(__NRFX_DOXYGEN__)
    nrf_power_pof_thrvddh_t            thrvddh; //!< Threshold for power failure detection on the VDDH pin.
#endif
}nrfx_power_pofwarn_config_t;

#if NRF_POWER_HAS_SLEEPEVT || defined(__NRFX_DOXYGEN__)
/**
 * @brief The configuration of sleep event processing.
 *
 * Configuration used to enable and configure sleep event handling.
 */
typedef struct
{
    nrfx_power_sleep_event_handler_t handler;    //!< Event handler.
    bool                             en_enter:1; //!< Enable event on sleep entering.
    bool                             en_exit :1; //!< Enable event on sleep exiting.
}nrfx_power_sleepevt_config_t;
#endif

#if NRF_POWER_HAS_USBREG || defined(__NRFX_DOXYGEN__)
/**
 * @brief The configuration of the USB-related power events.
 *
 * Configuration used to enable and configure USB power event handling.
 */
typedef struct
{
    nrfx_power_usb_event_handler_t handler; //!< Event processing.
}nrfx_power_usbevt_config_t;
#endif /* NRF_POWER_HAS_USBREG */

/**
 * @brief Function for getting the handler of the power failure comparator.
 * @return Handler of the power failure comparator.
 */
nrfx_power_pofwarn_event_handler_t nrfx_power_pof_handler_get(void);

#if NRF_POWER_HAS_USBREG || defined(__NRFX_DOXYGEN__)
/**
 * @brief Function for getting the handler of the USB power.
 * @return Handler of the USB power.
 */
nrfx_power_usb_event_handler_t nrfx_power_usb_handler_get(void);
#endif

/**
 * @brief Function for initializing the power module driver.
 *
 * Enabled power module driver processes all the interrupts from the power system.
 *
 * @param[in] p_config Pointer to the structure with the initial configuration.
 *
 * @retval NRFX_SUCCESS                   Successfully initialized.
 * @retval NRFX_ERROR_ALREADY_INITIALIZED Module was already initialized.
 */
nrfx_err_t nrfx_power_init(nrfx_power_config_t const * p_config);

/**
 * @brief Function for unintializing the power module driver.
 *
 * Disables all the interrupt handling in the module.
 *
 * @sa nrfx_power_init
 */
void nrfx_power_uninit(void);

#if NRF_POWER_HAS_POFCON || defined(__NRFX_DOXYGEN__)
/**
 * @brief Function for initializing the power failure comparator.
 *
 * Configures the power failure comparator. This function does not set it up and enable it.
 * These steps can be done with functions @ref nrfx_power_pof_enable and @ref nrfx_power_pof_disable
 * or with the SoftDevice API (when in use).
 *
 * @param[in] p_config Configuration with values and event handler.
 *                     If event handler is set to NULL, the interrupt will be disabled.
 */
void nrfx_power_pof_init(nrfx_power_pofwarn_config_t const * p_config);

/**
 * @brief Function for enabling the power failure comparator.
 * Sets and enables the interrupt of the power failure comparator. This function cannot be in use
 * when SoftDevice is enabled. If the event handler set in the init function is set to NULL, the interrupt
 * will be disabled.
 *
 * @param[in] p_config Configuration with values and event handler.
 */
void nrfx_power_pof_enable(nrfx_power_pofwarn_config_t const * p_config);

/**
 * @brief Function for disabling the power failure comparator.
 *
 * Disables the power failure comparator interrupt.
 */
void nrfx_power_pof_disable(void);

/**
 * @brief Function for clearing the power failure comparator settings.
 *
 * Clears the settings of the power failure comparator.
 */
void nrfx_power_pof_uninit(void);
#endif // NRF_POWER_HAS_POFCON || defined(__NRFX_DOXYGEN__)

#if NRF_POWER_HAS_SLEEPEVT || defined(__NRFX_DOXYGEN__)
/**
 * @brief Function for initializing the processing of the sleep events.
 *
 * Configures and sets up the sleep event processing.
 *
 * @param[in] p_config Configuration with values and event handler.
 *
 * @sa nrfx_power_sleepevt_uninit
 *
 */
void nrfx_power_sleepevt_init(nrfx_power_sleepevt_config_t const * p_config);

/**
 * @brief Function for enabling the processing of the sleep events.
 *
 * @param[in] p_config Configuration with values and event handler.
 */
void nrfx_power_sleepevt_enable(nrfx_power_sleepevt_config_t const * p_config);

/** @brief Function for disabling the processing of the sleep events. */
void nrfx_power_sleepevt_disable(void);

/**
 * @brief Function for uninitializing the processing of the sleep events.
 *
 * @sa nrfx_power_sleepevt_init
 */
void nrfx_power_sleepevt_uninit(void);
#endif /* NRF_POWER_HAS_SLEEPEVT */

#if NRF_POWER_HAS_USBREG || defined(__NRFX_DOXYGEN__)
/**
 * @brief Function for initializing the processing of USB power event.
 *
 * Configures and sets up the USB power event processing.
 *
 * @param[in] p_config Configuration with values and event handler.
 *
 * @sa nrfx_power_usbevt_uninit
 */
void nrfx_power_usbevt_init(nrfx_power_usbevt_config_t const * p_config);

/** @brief Function for enabling the processing of USB power event. */
void nrfx_power_usbevt_enable(void);

/** @brief Function for disabling the processing of USB power event. */
void nrfx_power_usbevt_disable(void);

/**
 * @brief Function for uninitalizing the processing of USB power event.
 *
 * @sa nrfx_power_usbevt_init
 */
void nrfx_power_usbevt_uninit(void);

/**
 * @brief Function for getting the status of USB power.
 *
 * @return Current USB power status.
 */
__STATIC_INLINE nrfx_power_usb_state_t nrfx_power_usbstatus_get(void);

#endif /* NRF_POWER_HAS_USBREG */

#ifndef SUPPRESS_INLINE_IMPLEMENTATION

#if NRF_POWER_HAS_USBREG
__STATIC_INLINE nrfx_power_usb_state_t nrfx_power_usbstatus_get(void)
{
    uint32_t status = nrf_power_usbregstatus_get();
    if(0 == (status & NRF_POWER_USBREGSTATUS_VBUSDETECT_MASK))
    {
        return NRFX_POWER_USB_STATE_DISCONNECTED;
    }
    if(0 == (status & NRF_POWER_USBREGSTATUS_OUTPUTRDY_MASK))
    {
        return NRFX_POWER_USB_STATE_CONNECTED;
    }
    return NRFX_POWER_USB_STATE_READY;
}
#endif /* NRF_POWER_HAS_USBREG */

#endif /* SUPPRESS_INLINE_IMPLEMENTATION */

/** @} */


void nrfx_power_irq_handler(void);


#ifdef __cplusplus
}
#endif

#endif /* NRFX_POWER_H__ */