/**
 * Copyright (c) 2013 - 2018, Nordic Semiconductor ASA
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice, this
 *    list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form, except as embedded into a Nordic
 *    Semiconductor ASA integrated circuit in a product or a software update for
 *    such product, must reproduce the above copyright notice, this list of
 *    conditions and the following disclaimer in the documentation and/or other
 *    materials provided with the distribution.
 *
 * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
 *    contributors may be used to endorse or promote products derived from this
 *    software without specific prior written permission.
 *
 * 4. This software, with or without modification, must only be used with a
 *    Nordic Semiconductor ASA integrated circuit.
 *
 * 5. Any software provided in binary form under this license must not be reverse
 *    engineered, decompiled, modified and/or disassembled.
 *
 * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */
/** @cond To make doxygen skip this file */

/** @file
 *  This header contains defines regarding persistent storage that are specific to
 *  persistent storage implementation and application use case.
 */
#ifndef PSTORAGE_PL_H__
#define PSTORAGE_PL_H__

#include <stdint.h>
#include "nrf.h"

#ifdef __cplusplus
extern "C" {
#endif

static __INLINE uint16_t pstorage_flash_page_size()
{
  return (uint16_t)NRF_FICR->CODEPAGESIZE;
}

#define PSTORAGE_FLASH_PAGE_SIZE     pstorage_flash_page_size()          /**< Size of one flash page. */
#define PSTORAGE_FLASH_EMPTY_MASK    0xFFFFFFFF                          /**< Bit mask that defines an empty address in flash. */

static __INLINE uint32_t pstorage_flash_page_end()
{
   uint32_t bootloader_addr = NRF_UICR->NRFFW[0];

   return ((bootloader_addr != PSTORAGE_FLASH_EMPTY_MASK) ?
           (bootloader_addr/ PSTORAGE_FLASH_PAGE_SIZE) : NRF_FICR->CODESIZE);
}

#define PSTORAGE_FLASH_PAGE_END     pstorage_flash_page_end()

#define PSTORAGE_NUM_OF_PAGES       2                                                           /**< Number of flash pages allocated for the pstorage module excluding the swap page, configurable based on system requirements. */
#define PSTORAGE_MIN_BLOCK_SIZE     0x0010                                                      /**< Minimum size of block that can be registered with the module. Should be configured based on system requirements, recommendation for this value is to have at least the size of a word. */

#define PSTORAGE_DATA_START_ADDR    ((PSTORAGE_FLASH_PAGE_END - PSTORAGE_NUM_OF_PAGES) \
                                    * PSTORAGE_FLASH_PAGE_SIZE)                                 /**< Start address for persistent data, configurable according to system requirements. */
#define PSTORAGE_DATA_END_ADDR      (PSTORAGE_FLASH_PAGE_END * PSTORAGE_FLASH_PAGE_SIZE)        /**< End address for persistent data, configurable according to system requirements. */
#define PSTORAGE_MAX_BLOCK_SIZE     PSTORAGE_FLASH_PAGE_SIZE                                    /**< Maximum size of block that can be registered with the module. Should be configured based on system requirements. Also, should be greater than or equal to the minimum size. */
#define PSTORAGE_CMD_QUEUE_SIZE     30                                                          /**< Maximum number of flash access commands that can be maintained by the module for all applications. Configurable. */


/** Abstracts persistently memory block identifier. */
typedef uint32_t pstorage_block_t;

typedef struct
{
    uint32_t            module_id;      /**< Module ID.*/
    pstorage_block_t    block_id;       /**< Block ID.*/
} pstorage_handle_t;

typedef uint16_t pstorage_size_t;      /** Size of length and offset fields. */


#ifdef __cplusplus
}
#endif

#endif // PSTORAGE_PL_H__

/** @} */
/** @endcond */