/** * Copyright (c) 2015 - 2018, Nordic Semiconductor ASA * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /** @file mqtt_internal.h * * @brief Function and data structures internal to MQTT module. */ #ifndef MQTT_INTERNAL_H_ #define MQTT_INTERNAL_H_ #include "nordic_common.h" #include "sdk_common.h" #include "sdk_config.h" #include "mqtt.h" #include "iot_errors.h" #include "nrf_tls.h" #include #include #include "nrf_error.h" #include "nrf_tls.h" #ifdef __cplusplus extern "C" { #endif #ifndef MQTT_MAX_CLIENTS #define MQTT_MAX_CLIENTS 1 /**< Maximum number of clients that can be managed by the module. */ #endif //MQTT_MAX_CLIENTS #ifndef MQTT_KEEPALIVE #define MQTT_KEEPALIVE 60 /**< Keep alive time for MQTT (in seconds). Sending of Ping Requests to be keep the connection alive are governed by this value. */ #endif //MQTT_KEEPALIVE #ifndef MQTT_MAX_PACKET_LENGTH #define MQTT_MAX_PACKET_LENGTH 128 /**< Maximum MQTT packet size that can be sent (including the fixed and variable header). */ #endif // MQTT_MAX_PACKET_LENGTH #define MQTT_FIXED_HEADER_SIZE 2 /**< Fixed header minimum size. Remaining length size is 1 in this case. */ #define MQTT_FIXED_HEADER_EXTENDED_SIZE 5 /**< Maximum size of the fixed header. Remaining length size is 4 in this case. */ /**@brief MQTT Control Packet Types. */ #define MQTT_PKT_TYPE_CONNECT 0x10 #define MQTT_PKT_TYPE_CONNACK 0x20 #define MQTT_PKT_TYPE_PUBLISH 0x30 #define MQTT_PKT_TYPE_PUBACK 0x40 #define MQTT_PKT_TYPE_PUBREC 0x50 #define MQTT_PKT_TYPE_PUBREL 0x60 #define MQTT_PKT_TYPE_PUBCOMP 0x70 #define MQTT_PKT_TYPE_SUBSCRIBE 0x82 // QoS 1 for subscribe #define MQTT_PKT_TYPE_SUBACK 0x90 #define MQTT_PKT_TYPE_UNSUBSCRIBE 0xA2 #define MQTT_PKT_TYPE_UNSUBACK 0xB0 #define MQTT_PKT_TYPE_PINGREQ 0xC0 #define MQTT_PKT_TYPE_PINGRSP 0xD0 #define MQTT_PKT_TYPE_DISCONNECT 0xE0 /**@brief Masks for MQTT header flags. */ #define MQTT_HEADER_DUP_MASK 0x08 #define MQTT_HEADER_QOS_MASK 0x06 #define MQTT_HEADER_RETAIN_MASK 0x01 #define MQTT_HEADER_CONNACK_MASK 0x0F /**@brief Masks for MQTT header flags. */ #define MQTT_CONNECT_FLAG_CLEAN_SESSION 0x02 #define MQTT_CONNECT_FLAG_WILL_TOPIC 0x04 #define MQTT_CONNECT_FLAG_WILL_RETAIN 0x20 #define MQTT_CONNECT_FLAG_PASSWORD 0x40 #define MQTT_CONNECT_FLAG_USERNAME 0x80 /**@brief Size of mandatory header of MQTT Packet. */ #define MQTT_PKT_HEADER_SIZE 2 /**@brief */ #define MQTT_MAX_PAYLOAD_SIZE 0x0FFFFFFF /**@brief Maximum size of variable and payload in the packet. */ #define MQTT_MAX_VARIABLE_HEADER_N_PAYLOAD (MQTT_MAX_PACKET_LENGTH - MQTT_FIXED_HEADER_EXTENDED_SIZE) /**@brief Defines size of uint8 in bytes. */ #define SIZE_OF_UINT8 1 /**@brief Defines size of uint8 in bytes. */ #define SIZE_OF_UINT16 2 /**@brief Computes total size needed to pack a UTF8 string. */ #define GET_UT8STR_BUFFER_SIZE(STR) (SIZE_OF_UINT16 + (STR)->utf_strlen) /**@brief Computes total size needed to pack a binary stream. */ #define GET_BINSTR_BUFFER_SIZE(STR) ((STR)->bin_strlen) /**@brief Unsubscribe packet size. */ #define MQTT_UNSUBSCRIBE_PKT_SIZE 4 /**@brief Sets MQTT Client's state with one indicated in 'STATE'. */ #define MQTT_SET_STATE(CLIENT, STATE) ((CLIENT)->state |= (STATE)) /**@brief Sets MQTT Client's state exclusive to 'STATE'. */ #define MQTT_SET_STATE_EXCLUSIVE(CLIENT, STATE) ((CLIENT)->state = (STATE)) /**@brief Verifies if MQTT Client's state is set with one indicated in 'STATE'. */ #define MQTT_VERIFY_STATE(CLIENT, STATE) ((CLIENT)->state & (STATE)) /**@brief Reset 'STATE' in MQTT Client's state. */ #define MQTT_RESET_STATE(CLIENT, STATE) ((CLIENT)->state &= ~(STATE)) /**@brief Initialize MQTT Client's state. */ #define MQTT_STATE_INIT(CLIENT) (CLIENT)->state = MQTT_STATE_IDLE /**@brief Computes the first byte of MQTT message header based on message type, duplication flag, * QoS and the retain flag. */ #define MQTT_MESSAGES_OPTIONS(TYPE, DUP, QOS, RETAIN) \ (((TYPE) & 0xF0) | \ (((DUP) << 3) & 0x08) | \ (((QOS) << 1) & 0x06) | \ ((RETAIN) & 0x01)) #define MQTT_EVT_FLAG_NONE 0x00000000 #define MQTT_EVT_FLAG_INSTANCE_RESET 0x00000001 /** * @defgroup iot_mqtt_mutex_lock_unlock Module's Mutex Lock/Unlock Macros. * * @details Macros used to lock and unlock modules. Currently, SDK does not use mutexes but * framework is provided in case the need to use an alternative architecture arises. * @{ */ #define MQTT_MUTEX_LOCK() SDK_MUTEX_LOCK(m_mqtt_mutex) /**< Lock module using mutex */ #define MQTT_MUTEX_UNLOCK() SDK_MUTEX_UNLOCK(m_mqtt_mutex) /**< Unlock module using mutex */ /** @} */ /**@brief Check if the input pointer is NULL, if so it returns NRF_ERROR_NULL. */ #define NULL_PARAM_CHECK(PARAM) \ if ((PARAM) == NULL) \ { \ return (NRF_ERROR_NULL | IOT_MQTT_ERR_BASE); \ } #define NULL_PARAM_CHECK_VOID(PARAM) \ if ((PARAM) == NULL) \ { \ return; \ } /**@brief MQTT States. */ typedef enum { MQTT_STATE_IDLE = 0x00000000, /**< Idle state, implying the client entry in the table is unused/free. */ MQTT_STATE_TCP_CONNECTING = 0x00000001, /**< TCP Connection has been requested, awaiting result of the request. */ MQTT_STATE_TCP_CONNECTED = 0x00000002, /**< TCP Connection successfully established. */ MQTT_STATE_CONNECTED = 0x00000004, /**< MQTT Connection successful. */ MQTT_STATE_PENDING_WRITE = 0x00000008, /**< State that indicates write callback is awaited for an issued request. */ MQTT_STATE_DISCONNECTING = 0x00000010 /**< TCP Disconnect has been requested, awaiting result of the request. */ } mqtt_state_t; /**@brief Packs unsigned 8 bit value to the buffer at the offset requested. * * @param[in] val Value to be packed. * @param[in] buffer_len Total size of the buffer on which value is to be packed. * This shall not be zero. * @param[out] p_buffer Buffer where the value is to be packed. * @param[inout] p_offset Offset on the buffer where the value is to be packed. If the procedure * is successful, the offset is incremented to point to the next write/pack * location on the buffer. * * @retval NRF_SUCCESS if procedure is successful. * @retval NRF_ERROR_DATA_SIZE if the offset is greater than or equal to the buffer length. */ uint32_t pack_uint8(uint8_t val, uint32_t buffer_len, uint8_t * const p_buffer, uint32_t * const p_offset); /**@brief Packs unsigned 16 bit value to the buffer at the offset requested. * * @param[in] val Value to be packed. * @param[in] buffer_len Total size of the buffer on which value is to be packed. * This shall not be zero. * @param[out] p_buffer Buffer where the value is to be packed. * @param[inout] p_offset Offset on the buffer where the value is to be packed. If the procedure * is successful, the offset is incremented to point to the next write/pack * location on the buffer. * * @retval NRF_SUCCESS if the procedure is successful. * @retval NRF_ERROR_DATA_SIZE if the offset is greater than or equal to the buffer length minus * the size of unsigned 16 bit integer. */ uint32_t pack_uint16(uint16_t val, uint32_t buffer_len, uint8_t * const p_buffer, uint32_t * const p_offset); /**@brief Packs utf8 string to the buffer at the offset requested. * * @param[in] p_str UTF-8 string and its length to be packed. * @param[in] buffer_len Total size of the buffer on which string is to be packed. * This shall not be zero. * @param[out] p_buffer Buffer where the string is to be packed. * @param[inout] p_offset Offset on the buffer where the string is to be packed. If the procedure * is successful, the offset is incremented to point to the next write/pack * location on the buffer. * * @retval NRF_SUCCESS if the procedure is successful. * @retval NRF_ERROR_DATA_SIZE if the offset is greater than or equal to the buffer length minus * the size of unsigned 16 bit integer. * @retval NRF_ERROR_NO_MEM if there is no room on the buffer to pack the string. */ uint32_t pack_utf8_str(mqtt_utf8_t const * const p_str, uint32_t buffer_len, uint8_t * const p_buffer, uint32_t * const p_offset); /**@brief Packs binary string to the buffer at the offset requested. * * @param[in] p_str Binary string and its length to be packed. * @param[in] buffer_len Total size of the buffer on which string is to be packed. * @param[in] p_buffer Buffer where the string is to be packed. * @param[inout] p_offset Offset on the buffer where the string is to be packed. If the procedure * is successful, the offset is incremented to point to the next write/pack * location on the buffer. * * @retval NRF_SUCCESS if the procedure is successful. * @retval NRF_ERROR_DATA_SIZE if the offset is greater than or equal to the buffer length. * @retval NRF_ERROR_NO_MEM if there is no room on the buffer to pack the string. */ uint32_t pack_bin_str(mqtt_binstr_t const * const p_str, uint32_t buffer_len, uint8_t * const p_buffer, uint32_t * const p_offset); /**@brief Unpacks unsigned 8 bit value from the buffer from the offset requested. * * @param[out] p_val Memory where the value is to be unpacked. * @param[in] buffer_len Total size of the buffer. This shall not be zero. * @param[in] p_buffer Buffer from which the value is to be unpacked. * @param[inout] p_offset Offset on the buffer from where the value is to be unpacked. If the * procedure is successful, the offset is incremented to point to the next * read/unpack location on the buffer. * * @retval NRF_SUCCESS if the procedure is successful. * @retval NRF_ERROR_DATA_SIZE if the offset is greater than or equal to the buffer length. */ uint32_t unpack_uint8(uint8_t * p_val, uint32_t buffer_len, uint8_t * const p_buffer, uint32_t * const p_offset); /**@brief Unpacks unsigned 16 bit value from the buffer from the offset requested. * * @param[out] p_val Memory where the value is to be unpacked. * @param[in] buffer_len Total size of the buffer. This shall not be zero. * @param[in] p_buffer Buffer from which the value is to be unpacked. * @param[inout] p_offset Offset on the buffer from where the value is to be unpacked. If the * procedure is successful, the offset is incremented to point to the next * read/unpack location on the buffer. * * @retval NRF_SUCCESS if the procedure is successful. * @retval NRF_ERROR_DATA_SIZE if the offset is greater than or equal to the buffer length. */ uint32_t unpack_uint16(uint16_t * p_val, uint32_t buffer_len, uint8_t * const p_buffer, uint32_t * const p_offset); /**@brief Unpacks unsigned 16 bit value from the buffer from the offset requested. * * @param[out] p_str Memory where the utf8 string and its value are to be unpacked. * No copy of data is performed for the string. * @param[in] buffer_len Total size of the buffer. This shall not be zero. * @param[in] p_buffer Buffer from which the string is to be unpacked. * @param[inout] p_offset Offset on the buffer from where the value is to be unpacked. If the * procedure is successful, the offset is incremented to point to the next * read/unpack location on the buffer. * * @retval NRF_SUCCESS if the procedure is successful. * @retval NRF_ERROR_DATA_SIZE if the offset is greater than or equal to the buffer length. */ uint32_t unpack_utf8_str(mqtt_utf8_t * const p_str, uint32_t buffer_len, uint8_t * const p_buffer, uint32_t * const p_offset); /**@brief Unpacks binary string from the buffer from the offset requested. * * @param[out] p_str Memory where the binary string and its length are to be unpacked. * No copy of data is performed for the string. * @param[in] buffer_len Total size of the buffer. This shall not be zero. * @param[in] p_buffer Buffer where the value is to be unpacked. * @param[inout] p_offset Offset on the buffer from where the value is to be unpacked. If the * procedure is successful, the offset is incremented to point to the next * read/unpack location on the buffer. * * @retval NRF_SUCCESS if the procedure is successful. * @retval NRF_ERROR_DATA_SIZE if the offset is greater than or equal to the buffer length. */ uint32_t unpack_bin_str(mqtt_binstr_t * const p_str, uint32_t buffer_len, uint8_t * const p_buffer, uint32_t * const p_offset); /**@brief Unpacks utf8 string from the buffer from the offset requested. * * @param[out] p_str Memory where the utf8 string and its length are to be unpacked. * @param[in] buffer_len Total size of the buffer. This shall not be zero. * @param[in] p_buffer Buffer where the value is to be unpacked. * @param[inout] p_offset Offset on the buffer from where the value is to be unpacked. If the * procedure is successful, the offset is incremented to point to the next * read/unpack location on the buffer. * * @retval NRF_SUCCESS if the procedure is successful. * @retval NRF_ERROR_DATA_SIZE if the offset is greater than or equal to the buffer length. */ uint32_t zero_len_str_encode(uint32_t buffer_len, uint8_t * const p_buffer, uint32_t * const p_offset); /**@brief Computes and encodes length for the MQTT fixed header. * * @note The remaining length is not packed as a fixed unsigned 32 bit integer. Instead it is packed * on algorithm below: * * @code * do * encodedByte = X MOD 128 * X = X DIV 128 * // if there are more data to encode, set the top bit of this byte * if ( X > 0 ) * encodedByte = encodedByte OR 128 * endif * 'output' encodedByte * while ( X > 0 ) * @endcode * * @param[in] remaining_length Length of variable header and payload in the MQTT message. * @param[out] p_buffer Buffer where the length is to be packed. * @param[inout] p_offset Offset on the buffer where the length is to be packed. */ void packet_length_encode(uint32_t remaining_length, uint8_t * p_buffer, uint32_t * p_offset); /**@brief Decode MQTT Packet Length in the MQTT fixed header. * * @param[in] p_buffer Buffer where the length is to be decoded. * @param[in] buffer_len Length of p_buffer * @param[out] p_remaining_length Length of variable header and payload in the MQTT message. * @param[inout] p_offset Offset on the buffer from where the length is to be unpacked. * * @retval NRF_SUCCESS if the procedure is successful. * @retval NRF_ERROR_DATA_SIZE if the offset is greater than or equal to the buffer length. */ uint32_t packet_length_decode(uint8_t * p_buffer, uint32_t buffer_len, uint32_t * p_remaining_length, uint32_t * p_offset); /**@brief Encodes fixed header for the MQTT message and provides pointer to start of the header. * * @param[in] message_type Message type containing packet type and the flags. * Use @ref MQTT_MESSAGES_OPTIONS to construct the message_type. * @param[in] length Buffer where the message payload along with variable header. * @param[inout] pp_packet Pointer to the MQTT message variable header and payload. * The 5 bytes before the start of the message are assumed by the * routine to be available to pack the fixed header. However, since * the fixed header length is variable length, the pointer to the * start of the MQTT message along with encoded fixed header is * supplied as output parameter if the procedure was successful. * * @retval 0xFFFFFFFF if the procedure failed, else length of total MQTT message along with the * fixed header. */ uint32_t mqtt_encode_fixed_header(uint8_t message_type, uint32_t length, uint8_t ** pp_packet); /**@brief Constructs/encodes connect packet. * * @param[in] p_client Identifies the client for which the procedure is requested. * All information required for creating the packet like client id, * clean session flag, retain session flag etc are assumed to be * populated for the client instance when this procedure is requested. * @param[out] pp_packet Pointer to the MQTT connect message. * @param[out] p_packet_length Length of the connect request. * * @retval 0xFFFFFFFF if the procedure failed, else length of total MQTT message along with the * fixed header. */ void connect_request_encode(const mqtt_client_t * p_client, uint8_t ** pp_packet, uint32_t * p_packet_length); #ifdef __cplusplus } #endif #endif // MQTT_INTERNAL_H_