/** * Copyright (c) 2012 - 2019, Nordic Semiconductor ASA * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ #include "sdk_common.h" #if NRF_MODULE_ENABLED(APP_TIMER) #include "app_timer.h" #include #include "nrf.h" #include "nrf_peripherals.h" #include "nrf_soc.h" #include "app_error.h" #include "nrf_delay.h" #include "app_util_platform.h" #if APP_TIMER_CONFIG_USE_SCHEDULER #include "app_scheduler.h" #endif #define RTC1_IRQ_PRI APP_TIMER_CONFIG_IRQ_PRIORITY /**< Priority of the RTC1 interrupt (used for checking for timeouts and executing timeout handlers). */ #define SWI_IRQ_PRI APP_TIMER_CONFIG_IRQ_PRIORITY /**< Priority of the SWI interrupt (used for updating the timer list). */ // The current design assumes that both interrupt handlers run at the same interrupt level. // If this is to be changed, protection must be added to prevent them from interrupting each other // (e.g. by using guard/trigger flags). STATIC_ASSERT(RTC1_IRQ_PRI == SWI_IRQ_PRI); #define MAX_RTC_COUNTER_VAL 0x00FFFFFF /**< Maximum value of the RTC counter. */ #define RTC_COMPARE_OFFSET_MIN 3 /**< Minimum offset between the current RTC counter value and the Capture Compare register. Although the nRF51 Series User Specification recommends this value to be 2, we use 3 to be safer.*/ #define MAX_RTC_TASKS_DELAY 47 /**< Maximum delay until an RTC task is executed. */ #ifdef EGU_PRESENT #define SWI_PART(_id) CONCAT_2(SWI,_id) #define EGU_PART(_id) CONCAT_2(_EGU,_id) #define SWI_IRQ_n(_id) CONCAT_3(SWI_PART(_id), EGU_PART(_id),_IRQn) #define SWI_IRQ_Handler_n(_id) CONCAT_3(SWI_PART(_id), EGU_PART(_id),_IRQHandler) #else //EGU_PRESENT #define SWI_IRQ_n(_id) CONCAT_3(SWI,_id,_IRQn) #define SWI_IRQ_Handler_n(_id) CONCAT_3(SWI,_id,_IRQHandler) #endif #define SWI_IRQn SWI_IRQ_n(APP_TIMER_CONFIG_SWI_NUMBER) #define SWI_IRQHandler SWI_IRQ_Handler_n(APP_TIMER_CONFIG_SWI_NUMBER) #define MODULE_INITIALIZED (m_op_queue.size != 0) /**< Macro designating whether the module has been initialized properly. */ /**@brief Timer node type. The nodes will be used form a linked list of running timers. */ typedef struct { uint32_t ticks_to_expire; /**< Number of ticks from previous timer interrupt to timer expiry. */ uint32_t ticks_at_start; /**< Current RTC counter value when the timer was started. */ uint32_t ticks_first_interval; /**< Number of ticks in the first timer interval. */ uint32_t ticks_periodic_interval; /**< Timer period (for repeating timers). */ bool is_running; /**< True if timer is running, False otherwise. */ app_timer_mode_t mode; /**< Timer mode. */ app_timer_timeout_handler_t p_timeout_handler; /**< Pointer to function to be executed when the timer expires. */ void * p_context; /**< General purpose pointer. Will be passed to the timeout handler when the timer expires. */ void * next; /**< Pointer to the next node. */ } timer_node_t; STATIC_ASSERT(sizeof(timer_node_t) == APP_TIMER_NODE_SIZE); /**@brief Set of available timer operation types. */ typedef enum { TIMER_USER_OP_TYPE_NONE, /**< Invalid timer operation type. */ TIMER_USER_OP_TYPE_START, /**< Timer operation type Start. */ TIMER_USER_OP_TYPE_STOP, /**< Timer operation type Stop. */ TIMER_USER_OP_TYPE_STOP_ALL /**< Timer operation type Stop All. */ } timer_user_op_type_t; /**@brief Structure describing a timer start operation. */ typedef struct { uint32_t ticks_at_start; /**< Current RTC counter value when the timer was started. */ uint32_t ticks_first_interval; /**< Number of ticks in the first timer interval. */ uint32_t ticks_periodic_interval; /**< Timer period (for repeating timers). */ void * p_context; /**< General purpose pointer. Will be passed to the timeout handler when the timer expires. */ } timer_user_op_start_t; /**@brief Structure describing a timer operation. */ typedef struct { timer_user_op_type_t op_type; /**< Id of timer on which the operation is to be performed. */ timer_node_t * p_node; union { timer_user_op_start_t start; /**< Structure describing a timer start operation. */ } params; } timer_user_op_t; /**@brief Structure describing a timer operations queue. * * @details This queue will hold timer operations issued by the application * until the timer interrupt handler processes these operations. */ typedef struct { uint8_t first; /**< Index of first entry to have been inserted in the queue (i.e. the next entry to be executed). */ uint8_t last; /**< Index of last entry to have been inserted in the queue. */ uint8_t size; /**< Queue size. */ timer_user_op_t user_op_queue[APP_TIMER_CONFIG_OP_QUEUE_SIZE+1]; /**< Queue buffer. */ } timer_op_queue_t; STATIC_ASSERT(sizeof(timer_op_queue_t) % 4 == 0); #define CONTEXT_QUEUE_SIZE_MAX (2) static timer_op_queue_t m_op_queue; /**< Timer operations queue. */ static timer_node_t * mp_timer_id_head; /**< First timer in list of running timers. */ static uint32_t m_ticks_latest; /**< Last known RTC counter value. */ static uint32_t m_ticks_elapsed[CONTEXT_QUEUE_SIZE_MAX]; /**< Timer internal elapsed ticks queue. */ static uint8_t m_ticks_elapsed_q_read_ind; /**< Timer internal elapsed ticks queue read index. */ static uint8_t m_ticks_elapsed_q_write_ind; /**< Timer internal elapsed ticks queue write index. */ static bool m_rtc1_running; /**< Boolean indicating if RTC1 is running. */ static bool m_rtc1_reset; /**< Boolean indicating if RTC1 counter has been reset due to last timer removed from timer list during the timer list handling. */ #if APP_TIMER_WITH_PROFILER static uint8_t m_max_user_op_queue_utilization; /**< Maximum observed timer user operations queue utilization. */ #endif /**@brief Function for initializing the RTC1 counter. * * @param[in] prescaler Value of the RTC1 PRESCALER register. Set to 0 for no prescaling. */ static void rtc1_init(uint32_t prescaler) { NRF_RTC1->PRESCALER = prescaler; NVIC_SetPriority(RTC1_IRQn, RTC1_IRQ_PRI); } /**@brief Function for starting the RTC1 timer. */ static void rtc1_start(void) { NRF_RTC1->EVTENSET = RTC_EVTEN_COMPARE0_Msk; NRF_RTC1->INTENSET = RTC_INTENSET_COMPARE0_Msk; NVIC_ClearPendingIRQ(RTC1_IRQn); NVIC_EnableIRQ(RTC1_IRQn); NRF_RTC1->TASKS_START = 1; nrf_delay_us(MAX_RTC_TASKS_DELAY); m_rtc1_running = true; } /**@brief Function for stopping the RTC1 timer. */ static void rtc1_stop(void) { NVIC_DisableIRQ(RTC1_IRQn); NRF_RTC1->EVTENCLR = RTC_EVTEN_COMPARE0_Msk; NRF_RTC1->INTENCLR = RTC_INTENSET_COMPARE0_Msk; NRF_RTC1->TASKS_STOP = 1; nrf_delay_us(MAX_RTC_TASKS_DELAY); NRF_RTC1->TASKS_CLEAR = 1; m_ticks_latest = 0; nrf_delay_us(MAX_RTC_TASKS_DELAY); m_rtc1_running = false; } /**@brief Function for returning the current value of the RTC1 counter. * * @return Current value of the RTC1 counter. */ static __INLINE uint32_t rtc1_counter_get(void) { return NRF_RTC1->COUNTER; } /**@brief Function for computing the difference between two RTC1 counter values. * * @return Number of ticks elapsed from ticks_old to ticks_now. */ static __INLINE uint32_t ticks_diff_get(uint32_t ticks_now, uint32_t ticks_old) { return ((ticks_now - ticks_old) & MAX_RTC_COUNTER_VAL); } /**@brief Function for setting the RTC1 Capture Compare register 0, and enabling the corresponding * event. * * @param[in] value New value of Capture Compare register 0. */ static __INLINE void rtc1_compare0_set(uint32_t value) { NRF_RTC1->CC[0] = value; } /**@brief Function for inserting a timer in the timer list. * * @param[in] timer_id Id of timer to insert. */ static void timer_list_insert(timer_node_t * p_timer) { if (mp_timer_id_head == NULL) { mp_timer_id_head = p_timer; } else { if (p_timer->ticks_to_expire <= mp_timer_id_head->ticks_to_expire) { mp_timer_id_head->ticks_to_expire -= p_timer->ticks_to_expire; p_timer->next = mp_timer_id_head; mp_timer_id_head = p_timer; } else { timer_node_t * p_previous; timer_node_t * p_current; uint32_t ticks_to_expire; ticks_to_expire = p_timer->ticks_to_expire; p_previous = mp_timer_id_head; p_current = mp_timer_id_head; while ((p_current != NULL) && (ticks_to_expire > p_current->ticks_to_expire)) { ticks_to_expire -= p_current->ticks_to_expire; p_previous = p_current; p_current = p_current->next; } if (p_current != NULL) { p_current->ticks_to_expire -= ticks_to_expire; } p_timer->ticks_to_expire = ticks_to_expire; p_timer->next = p_current; p_previous->next = p_timer; } } } /**@brief Function for removing a timer from the timer queue. * * @param[in] timer_id Id of timer to remove. * * @return TRUE if Capture Compare register must be updated, FALSE otherwise. */ static bool timer_list_remove(timer_node_t * p_timer) { timer_node_t * p_old_head; timer_node_t * p_previous; timer_node_t * p_current; uint32_t timeout; // Find the timer's position in timer list. p_old_head = mp_timer_id_head; p_previous = mp_timer_id_head; p_current = p_previous; while (p_current != NULL) { if (p_current == p_timer) { break; } p_previous = p_current; p_current = p_current->next; } // Timer not in active list. if (p_current == NULL) { return false; } // Timer is the first in the list if (p_previous == p_current) { mp_timer_id_head = mp_timer_id_head->next; // No more timers in the list. Reset RTC1 in case Start timer operations are present in the queue. if (mp_timer_id_head == NULL) { NRF_RTC1->TASKS_CLEAR = 1; m_ticks_latest = 0; m_rtc1_reset = true; nrf_delay_us(MAX_RTC_TASKS_DELAY); } } // Remaining timeout between next timeout. timeout = p_current->ticks_to_expire; // Link previous timer with next of this timer, i.e. removing the timer from list. p_previous->next = p_current->next; // If this is not the last timer, increment the next timer by this timer timeout. p_current = p_previous->next; if (p_current != NULL) { p_current->ticks_to_expire += timeout; } return (p_old_head != mp_timer_id_head); } /**@brief Function for scheduling a check for timeouts by generating a RTC1 interrupt. */ static void timer_timeouts_check_sched(void) { NVIC_SetPendingIRQ(RTC1_IRQn); } /**@brief Function for scheduling a timer list update by generating a SWI interrupt. */ static void timer_list_handler_sched(void) { NVIC_SetPendingIRQ(SWI_IRQn); } #if APP_TIMER_CONFIG_USE_SCHEDULER static void timeout_handler_scheduled_exec(void * p_event_data, uint16_t event_size) { APP_ERROR_CHECK_BOOL(event_size == sizeof(app_timer_event_t)); app_timer_event_t const * p_timer_event = (app_timer_event_t *)p_event_data; p_timer_event->timeout_handler(p_timer_event->p_context); } #endif /**@brief Function for executing an application timeout handler, either by calling it directly, or * by passing an event to the @ref app_scheduler. * * @param[in] p_timer Pointer to expired timer. */ static void timeout_handler_exec(timer_node_t * p_timer) { #if APP_TIMER_CONFIG_USE_SCHEDULER app_timer_event_t timer_event; timer_event.timeout_handler = p_timer->p_timeout_handler; timer_event.p_context = p_timer->p_context; uint32_t err_code = app_sched_event_put(&timer_event, sizeof(timer_event), timeout_handler_scheduled_exec); APP_ERROR_CHECK(err_code); #else p_timer->p_timeout_handler(p_timer->p_context); #endif } /**@brief Function for checking for expired timers. */ static void timer_timeouts_check(void) { // Handle expired of timer if (mp_timer_id_head != NULL) { timer_node_t * p_timer; timer_node_t * p_previous_timer; uint32_t ticks_elapsed; uint32_t ticks_expired; // Initialize actual elapsed ticks being consumed to 0. ticks_expired = 0; // ticks_elapsed is collected here, job will use it. ticks_elapsed = ticks_diff_get(rtc1_counter_get(), m_ticks_latest); // Auto variable containing the head of timers expiring. p_timer = mp_timer_id_head; // Expire all timers within ticks_elapsed and collect ticks_expired. while (p_timer != NULL) { // Do nothing if timer did not expire. if (ticks_elapsed < p_timer->ticks_to_expire) { break; } // Decrement ticks_elapsed and collect expired ticks. ticks_elapsed -= p_timer->ticks_to_expire; ticks_expired += p_timer->ticks_to_expire; // Move to next timer. p_previous_timer = p_timer; p_timer = p_timer->next; // Execute Task. if (p_previous_timer->is_running) { p_previous_timer->is_running = false; timeout_handler_exec(p_previous_timer); } } // Prepare to queue the ticks expired in the m_ticks_elapsed queue. if (m_ticks_elapsed_q_read_ind == m_ticks_elapsed_q_write_ind) { // The read index of the queue is equal to the write index. This means the new // value of ticks_expired should be stored at a new location in the m_ticks_elapsed // queue (which is implemented as a double buffer). // Check if there will be a queue overflow. if (++m_ticks_elapsed_q_write_ind == CONTEXT_QUEUE_SIZE_MAX) { // There will be a queue overflow. Hence the write index should point to the start // of the queue. m_ticks_elapsed_q_write_ind = 0; } } // Queue the ticks expired. m_ticks_elapsed[m_ticks_elapsed_q_write_ind] = ticks_expired; timer_list_handler_sched(); } } /**@brief Function for acquiring the number of ticks elapsed. * * @param[out] p_ticks_elapsed Number of ticks elapsed. * * @return TRUE if elapsed ticks was read from queue, FALSE otherwise. */ static bool elapsed_ticks_acquire(uint32_t * p_ticks_elapsed) { // Pick the elapsed value from queue. if (m_ticks_elapsed_q_read_ind != m_ticks_elapsed_q_write_ind) { // Dequeue elapsed value. m_ticks_elapsed_q_read_ind++; if (m_ticks_elapsed_q_read_ind == CONTEXT_QUEUE_SIZE_MAX) { m_ticks_elapsed_q_read_ind = 0; } *p_ticks_elapsed = m_ticks_elapsed[m_ticks_elapsed_q_read_ind]; m_ticks_latest += *p_ticks_elapsed; m_ticks_latest &= MAX_RTC_COUNTER_VAL; return true; } else { // No elapsed value in queue. *p_ticks_elapsed = 0; return false; } } /**@brief Function for updating the timer list for expired timers. * * @param[in] ticks_elapsed Number of elapsed ticks. * @param[in] ticks_previous Previous known value of the RTC counter. * @param[out] p_restart_list_head List of repeating timers to be restarted. */ static void expired_timers_handler(uint32_t ticks_elapsed, uint32_t ticks_previous, timer_node_t ** p_restart_list_head) { uint32_t ticks_expired = 0; while (mp_timer_id_head != NULL) { timer_node_t * p_timer; timer_node_t * p_timer_expired; // Auto variable for current timer node. p_timer = mp_timer_id_head; // Do nothing if timer did not expire if (ticks_elapsed < p_timer->ticks_to_expire) { p_timer->ticks_to_expire -= ticks_elapsed; break; } // Decrement ticks_elapsed and collect expired ticks. ticks_elapsed -= p_timer->ticks_to_expire; ticks_expired += p_timer->ticks_to_expire; // Timer expired, set ticks_to_expire zero. p_timer->ticks_to_expire = 0; // Remove the expired timer from head. p_timer_expired = mp_timer_id_head; mp_timer_id_head = p_timer->next; // Timer will be restarted if periodic. if (p_timer->ticks_periodic_interval != 0) { p_timer->ticks_at_start = (ticks_previous + ticks_expired) & MAX_RTC_COUNTER_VAL; p_timer->ticks_first_interval = p_timer->ticks_periodic_interval; p_timer->next = *p_restart_list_head; *p_restart_list_head = p_timer_expired; } } } /**@brief Function for handling timer list insertions. * * @param[in] p_restart_list_head List of repeating timers to be restarted. * * @return TRUE if Capture Compare register must be updated, FALSE otherwise. */ static bool list_insertions_handler(timer_node_t * p_restart_list_head) { bool compare_update = false; timer_node_t * p_timer_id_old_head; // Remember the old head, so as to decide if new compare needs to be set. p_timer_id_old_head = mp_timer_id_head; // Handle insertions of timers. while ((p_restart_list_head != NULL) || (m_op_queue.first != m_op_queue.last)) { timer_node_t * p_timer; if (p_restart_list_head != NULL) { p_timer = p_restart_list_head; p_restart_list_head = p_timer->next; } else { timer_user_op_t * p_user_op = &m_op_queue.user_op_queue[m_op_queue.first]; m_op_queue.first++; if (m_op_queue.first == m_op_queue.size) { m_op_queue.first = 0; } p_timer = p_user_op->p_node; switch (p_user_op->op_type) { case TIMER_USER_OP_TYPE_STOP: // Delete node if timer is running. if (timer_list_remove(p_user_op->p_node)) { compare_update = true; } p_timer->is_running = false; continue; case TIMER_USER_OP_TYPE_STOP_ALL: // Delete list of running timers, and mark all timers as not running. while (mp_timer_id_head != NULL) { timer_node_t * p_head = mp_timer_id_head; p_head->is_running = false; mp_timer_id_head = p_head->next; } continue; case TIMER_USER_OP_TYPE_START: break; default: // No implementation needed. continue; } if (p_timer->is_running) { continue; } p_timer->ticks_at_start = p_user_op->params.start.ticks_at_start; p_timer->ticks_first_interval = p_user_op->params.start.ticks_first_interval; p_timer->ticks_periodic_interval = p_user_op->params.start.ticks_periodic_interval; p_timer->p_context = p_user_op->params.start.p_context; if (m_rtc1_reset) { p_timer->ticks_at_start = 0; } } // Prepare the node to be inserted. if ( ((p_timer->ticks_at_start - m_ticks_latest) & MAX_RTC_COUNTER_VAL) < (MAX_RTC_COUNTER_VAL / 2) ) { p_timer->ticks_to_expire = ticks_diff_get(p_timer->ticks_at_start, m_ticks_latest) + p_timer->ticks_first_interval; } else { uint32_t delta_current_start; delta_current_start = ticks_diff_get(m_ticks_latest, p_timer->ticks_at_start); if (p_timer->ticks_first_interval > delta_current_start) { p_timer->ticks_to_expire = p_timer->ticks_first_interval - delta_current_start; } else { p_timer->ticks_to_expire = 0; } } p_timer->ticks_at_start = 0; p_timer->ticks_first_interval = 0; p_timer->is_running = true; p_timer->next = NULL; // Insert into list timer_list_insert(p_timer); } return (compare_update || (mp_timer_id_head != p_timer_id_old_head)); } /**@brief Function for updating the Capture Compare register. */ static void compare_reg_update(timer_node_t * p_timer_id_head_old) { // Setup the timeout for timers on the head of the list if (mp_timer_id_head != NULL) { uint32_t ticks_to_expire = mp_timer_id_head->ticks_to_expire; uint32_t pre_counter_val = rtc1_counter_get(); uint32_t cc = m_ticks_latest; uint32_t ticks_elapsed = ticks_diff_get(pre_counter_val, cc) + RTC_COMPARE_OFFSET_MIN; if (!m_rtc1_running) { // No timers were already running, start RTC rtc1_start(); } cc += (ticks_elapsed < ticks_to_expire) ? ticks_to_expire : ticks_elapsed; cc &= MAX_RTC_COUNTER_VAL; rtc1_compare0_set(cc); uint32_t post_counter_val = rtc1_counter_get(); if ( (ticks_diff_get(post_counter_val, pre_counter_val) + RTC_COMPARE_OFFSET_MIN) > ticks_diff_get(cc, pre_counter_val) ) { // When this happens the COMPARE event may not be triggered by the RTC. // The nRF51 Series User Specification states that if the COUNTER value is N // (i.e post_counter_val = N), writing N or N + 1 to a CC register may not trigger a // COMPARE event. Hence the RTC interrupt is forcefully pended by calling the following // function. rtc1_compare0_set(rtc1_counter_get()); // this should prevent CC to fire again in the background while the code is in RTC-ISR nrf_delay_us(MAX_RTC_TASKS_DELAY); timer_timeouts_check_sched(); } } else { #if (APP_TIMER_KEEPS_RTC_ACTIVE == 0) // No timers are running, stop RTC rtc1_stop(); #endif //(APP_TIMER_KEEPS_RTC_ACTIVE == 0) } } /**@brief Function for handling changes to the timer list. */ static void timer_list_handler(void) { timer_node_t * p_restart_list_head = NULL; uint32_t ticks_elapsed; uint32_t ticks_previous; bool ticks_have_elapsed; bool compare_update = false; timer_node_t * p_timer_id_head_old; #if APP_TIMER_WITH_PROFILER { uint8_t size = m_op_queue.size; uint8_t first = m_op_queue.first; uint8_t last = m_op_queue.last; uint8_t utilization = (first <= last) ? (last - first) : (size + 1 - first + last); if (utilization > m_max_user_op_queue_utilization) { m_max_user_op_queue_utilization = utilization; } } #endif // Back up the previous known tick and previous list head ticks_previous = m_ticks_latest; p_timer_id_head_old = mp_timer_id_head; // Get number of elapsed ticks ticks_have_elapsed = elapsed_ticks_acquire(&ticks_elapsed); // Handle expired timers if (ticks_have_elapsed) { expired_timers_handler(ticks_elapsed, ticks_previous, &p_restart_list_head); compare_update = true; } // Handle list insertions if (list_insertions_handler(p_restart_list_head)) { compare_update = true; } // Update compare register if necessary if (compare_update) { compare_reg_update(p_timer_id_head_old); } m_rtc1_reset = false; } /**@brief Function for enqueueing a new operations queue entry. * * @param[in] last_index Index of the next last index to be enqueued. */ static void user_op_enque(uint8_t last_index) { m_op_queue.last = last_index; } /**@brief Function for allocating a new operations queue entry. * * @param[out] p_last_index Index of the next last index to be enqueued. * * @return Pointer to allocated queue entry, or NULL if queue is full. */ static timer_user_op_t * user_op_alloc( uint8_t * p_last_index) { uint8_t last; timer_user_op_t * p_user_op; last = m_op_queue.last + 1; if (last == m_op_queue.size) { // Overflow case. last = 0; } if (last == m_op_queue.first) { // Queue is full. return NULL; } *p_last_index = last; p_user_op = &m_op_queue.user_op_queue[m_op_queue.last]; return p_user_op; } /**@brief Function for scheduling a Timer Start operation. * * @param[in] timer_id Id of timer to start. * @param[in] timeout_initial Time (in ticks) to first timer expiry. * @param[in] timeout_periodic Time (in ticks) between periodic expiries. * @param[in] p_context General purpose pointer. Will be passed to the timeout handler when * the timer expires. * @return NRF_SUCCESS on success, otherwise an error code. */ static uint32_t timer_start_op_schedule(timer_node_t * p_node, uint32_t timeout_initial, uint32_t timeout_periodic, void * p_context) { uint8_t last_index; uint32_t err_code = NRF_SUCCESS; CRITICAL_REGION_ENTER(); timer_user_op_t * p_user_op = user_op_alloc(&last_index); if (p_user_op == NULL) { err_code = NRF_ERROR_NO_MEM; } else { p_user_op->op_type = TIMER_USER_OP_TYPE_START; p_user_op->p_node = p_node; p_user_op->params.start.ticks_at_start = rtc1_counter_get(); p_user_op->params.start.ticks_first_interval = timeout_initial; p_user_op->params.start.ticks_periodic_interval = timeout_periodic; p_user_op->params.start.p_context = p_context; user_op_enque(last_index); } CRITICAL_REGION_EXIT(); if (err_code == NRF_SUCCESS) { timer_list_handler_sched(); } return err_code; } /**@brief Function for scheduling a Timer Stop operation. * * @param[in] timer_id Id of timer to stop. * @param[in] op_type Type of stop operation * * @return NRF_SUCCESS on successful scheduling a timer stop operation. NRF_ERROR_NO_MEM when there * is no memory left to schedule the timer stop operation. */ static uint32_t timer_stop_op_schedule(timer_node_t * p_node, timer_user_op_type_t op_type) { uint8_t last_index; uint32_t err_code = NRF_SUCCESS; CRITICAL_REGION_ENTER(); timer_user_op_t * p_user_op = user_op_alloc(&last_index); if (p_user_op == NULL) { err_code = NRF_ERROR_NO_MEM; } else { p_user_op->op_type = op_type; p_user_op->p_node = p_node; user_op_enque(last_index); } CRITICAL_REGION_EXIT(); if (err_code == NRF_SUCCESS) { timer_list_handler_sched(); } return err_code; } /**@brief Function for handling the RTC1 interrupt. * * @details Checks for timeouts, and executes timeout handlers for expired timers. */ void RTC1_IRQHandler(void) { // Clear all events (also unexpected ones) NRF_RTC1->EVENTS_COMPARE[0] = 0; NRF_RTC1->EVENTS_COMPARE[1] = 0; NRF_RTC1->EVENTS_COMPARE[2] = 0; NRF_RTC1->EVENTS_COMPARE[3] = 0; NRF_RTC1->EVENTS_TICK = 0; NRF_RTC1->EVENTS_OVRFLW = 0; // Check for expired timers timer_timeouts_check(); } /**@brief Function for handling the SWI interrupt. * * @details Performs all updates to the timer list. */ void SWI_IRQHandler(void) { timer_list_handler(); } ret_code_t app_timer_init(void) { // Stop RTC to prevent any running timers from expiring (in case of reinitialization) rtc1_stop(); // Initialize operation queue m_op_queue.first = 0; m_op_queue.last = 0; m_op_queue.size = APP_TIMER_CONFIG_OP_QUEUE_SIZE+1; mp_timer_id_head = NULL; m_ticks_elapsed_q_read_ind = 0; m_ticks_elapsed_q_write_ind = 0; #if APP_TIMER_WITH_PROFILER m_max_user_op_queue_utilization = 0; #endif NVIC_ClearPendingIRQ(SWI_IRQn); NVIC_SetPriority(SWI_IRQn, SWI_IRQ_PRI); NVIC_EnableIRQ(SWI_IRQn); rtc1_init(APP_TIMER_CONFIG_RTC_FREQUENCY); m_ticks_latest = rtc1_counter_get(); return NRF_SUCCESS; } ret_code_t app_timer_create(app_timer_id_t const * p_timer_id, app_timer_mode_t mode, app_timer_timeout_handler_t timeout_handler) { // Check state and parameters VERIFY_MODULE_INITIALIZED(); if (timeout_handler == NULL) { return NRF_ERROR_INVALID_PARAM; } if (p_timer_id == NULL) { return NRF_ERROR_INVALID_PARAM; } if (((timer_node_t*)*p_timer_id)->is_running) { return NRF_ERROR_INVALID_STATE; } timer_node_t * p_node = (timer_node_t *)*p_timer_id; p_node->is_running = false; p_node->mode = mode; p_node->p_timeout_handler = timeout_handler; return NRF_SUCCESS; } ret_code_t app_timer_start(app_timer_id_t timer_id, uint32_t timeout_ticks, void * p_context) { uint32_t timeout_periodic; timer_node_t * p_node = (timer_node_t*)timer_id; // Check state and parameters VERIFY_MODULE_INITIALIZED(); if (timer_id == 0) { return NRF_ERROR_INVALID_STATE; } if (timeout_ticks < APP_TIMER_MIN_TIMEOUT_TICKS) { return NRF_ERROR_INVALID_PARAM; } if (p_node->p_timeout_handler == NULL) { return NRF_ERROR_INVALID_STATE; } // Schedule timer start operation timeout_periodic = (p_node->mode == APP_TIMER_MODE_REPEATED) ? timeout_ticks : 0; return timer_start_op_schedule(p_node, timeout_ticks, timeout_periodic, p_context); } ret_code_t app_timer_stop(app_timer_id_t timer_id) { timer_node_t * p_node = (timer_node_t*)timer_id; // Check state and parameters VERIFY_MODULE_INITIALIZED(); if ((timer_id == NULL) || (p_node->p_timeout_handler == NULL)) { return NRF_ERROR_INVALID_STATE; } p_node->is_running = false; // Schedule timer stop operation return timer_stop_op_schedule(p_node, TIMER_USER_OP_TYPE_STOP); } ret_code_t app_timer_stop_all(void) { // Check state VERIFY_MODULE_INITIALIZED(); return timer_stop_op_schedule(NULL, TIMER_USER_OP_TYPE_STOP_ALL); } uint32_t app_timer_cnt_get(void) { return rtc1_counter_get(); } uint32_t app_timer_cnt_diff_compute(uint32_t ticks_to, uint32_t ticks_from) { return ticks_diff_get(ticks_to, ticks_from); } #if APP_TIMER_WITH_PROFILER uint8_t app_timer_op_queue_utilization_get(void) { return m_max_user_op_queue_utilization; } #endif void app_timer_pause(void) { NRF_RTC1->TASKS_STOP = 1; } void app_timer_resume(void) { NRF_RTC1->TASKS_START = 1; } #endif //NRF_MODULE_ENABLED(APP_TIMER)