/** * Copyright (c) 2012 - 2019, Nordic Semiconductor ASA * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ #include "sdk_common.h" #if NRF_MODULE_ENABLED(NRF_BLE_CONN_PARAMS) #include #include "nrf.h" #include "sdk_errors.h" #include "ble_hci.h" #include "ble_err.h" #include "ble_conn_params.h" #include "ble_srv_common.h" #include "ble_conn_state.h" #include "nrf_sdh_ble.h" #include "app_timer.h" #include "app_util.h" #define NRF_BLE_CONN_PARAMS_INSTANCE_COUNT NRF_SDH_BLE_PERIPHERAL_LINK_COUNT //!< The number of @ref ble_conn_params_instance_t instances kept by the conn_params module. #if (NRF_BLE_CONN_PARAMS_INSTANCE_COUNT < 1) #error Invalid NRF_SDH_BLE_PERIPHERAL_LINK_COUNT value. Set it in SDK config (nrf_sdh_ble). #endif /** @brief Each peripheral link has such an instance associated with it. */ typedef struct { uint16_t conn_handle; //!< The connection handle of this link. If this is @ref BLE_CONN_HANDLE_INVALID, the instance is free. app_timer_id_t timer_id; //!< The ID of the timer associated with this link. uint8_t update_count; //!< The number of times the connection parameters have been attempted negotiated on this link. uint8_t params_ok; //!< Whether the current connection parameters on this link are acceptable according to the @p preferred_conn_params, and configured maximum deviations. ble_gap_conn_params_t preferred_conn_params; //!< The desired connection parameters for this link. } ble_conn_params_instance_t; static app_timer_t m_timer_data[NRF_BLE_CONN_PARAMS_INSTANCE_COUNT] = {{{0}}}; //!< Data needed for timers. static ble_conn_params_instance_t m_conn_params_instances[NRF_BLE_CONN_PARAMS_INSTANCE_COUNT] = {{0}}; //!< Configuration data for each connection. static ble_conn_params_init_t m_conn_params_config; //!< Configuration as provided by the application during intialization. static ble_gap_conn_params_t m_preferred_conn_params; //!< The preferred connection parameters as specified during initialization. //lint -esym(551, m_preferred_conn_params) "Not accessed" /**@brief Function for retrieving the conn_params instance belonging to a conn_handle * * @params[in] conn_handle The connection handle to retrieve the instance of. * * @return A pointer to the instance, or NULL if no instance was found with that conn_handle. */ static ble_conn_params_instance_t * instance_get(uint16_t conn_handle) { //lint -save -e681 "Loop not entered" when NRF_BLE_CONN_PARAMS_INSTANCE_COUNT is 0 for (uint32_t i = 0; i < NRF_BLE_CONN_PARAMS_INSTANCE_COUNT; i++) { if (m_conn_params_instances[i].conn_handle == conn_handle) { return &m_conn_params_instances[i]; } } //lint -restore return NULL; } /**@brief Function for initializing an instance, and associating it with a conn_handle. * * @params[in] p_instance The instance to initialize and associate. * @params[in] conn_handle The connection handle to associate with. */ static __INLINE void instance_claim(ble_conn_params_instance_t * p_instance, uint16_t conn_handle) { p_instance->conn_handle = conn_handle; p_instance->update_count = 0; p_instance->preferred_conn_params = m_preferred_conn_params; } /**@brief Function for freeing an instance. * * @params[in] p_instance The instance to free. */ static __INLINE void instance_free(ble_conn_params_instance_t * p_instance) { p_instance->conn_handle = BLE_CONN_HANDLE_INVALID; } /**@brief Function for validating a set of connection parameters against the preferred parameters. * * @param[in] p_preferred_conn_params The desired parameters. * @param[in] p_actual_conn_params The parameters to validate. * @param[in] max_slave_latency_err The amount of discrepancy in slave latency, in number of * connection intervals, that will be accepted. * @param[in] max_sup_timeout_err The amount of discrepancy in supervision timeout, in tens of * milliseconds, that will be accepted. * * @return Whether the params in @p p_actual_conn_params are acceptable given the other parameters. */ static bool is_conn_params_ok(ble_gap_conn_params_t const * p_preferred_conn_params, ble_gap_conn_params_t const * p_actual_conn_params, uint16_t max_slave_latency_err, uint16_t max_sup_timeout_err) { uint32_t max_allowed_sl = p_preferred_conn_params->slave_latency + max_slave_latency_err; uint32_t min_allowed_sl = p_preferred_conn_params->slave_latency - MIN(max_slave_latency_err, p_preferred_conn_params->slave_latency); uint32_t max_allowed_to = p_preferred_conn_params->conn_sup_timeout + max_sup_timeout_err; uint32_t min_allowed_to = p_preferred_conn_params->conn_sup_timeout - MIN(max_sup_timeout_err, p_preferred_conn_params->conn_sup_timeout); // Check if interval is within the acceptable range. // NOTE: Using max_conn_interval in the received event data because this contains // the client's connection interval. if ((p_actual_conn_params->max_conn_interval < p_preferred_conn_params->min_conn_interval) || (p_actual_conn_params->max_conn_interval > p_preferred_conn_params->max_conn_interval)) { return false; } // Check if slave latency is within the acceptable deviation. if ((p_actual_conn_params->slave_latency < min_allowed_sl) || (p_actual_conn_params->slave_latency > max_allowed_sl)) { return false; } // Check if supervision timeout is within the acceptable deviation. if ((p_actual_conn_params->conn_sup_timeout < min_allowed_to) || (p_actual_conn_params->conn_sup_timeout > max_allowed_to)) { return false; } return true; } static void send_error_evt(ret_code_t err_code) { if (m_conn_params_config.error_handler != NULL) { m_conn_params_config.error_handler(err_code); } } /**@brief Function for sending a conn_param_update request on-air, and handling errors. * * @param[in] conn_handle Connection to send request on. * @param[in] p_new_conn_params Connection parameters to request. * * @return Whether the request was successfully sent. */ static bool send_update_request(uint16_t conn_handle, ble_gap_conn_params_t * p_new_conn_params) { ret_code_t err_code; err_code = sd_ble_gap_conn_param_update(conn_handle, p_new_conn_params); if ((err_code != NRF_SUCCESS) && (err_code != NRF_ERROR_BUSY)) // NRF_ERROR_BUSY means another conn_param_update request is pending. { send_error_evt(err_code); } return (err_code == NRF_SUCCESS); } /**@brief Function called after conn_params_update_delay has happened. This is triggered by app_timer. * * @param[in] p_context Context identifying which connection this is for. */ static void update_timeout_handler(void * p_context) { uint32_t conn_handle = (uint32_t)p_context; ble_conn_params_instance_t * p_instance = instance_get(conn_handle); if (p_instance != NULL) { // Check if we have reached the maximum number of attempts if (p_instance->update_count < m_conn_params_config.max_conn_params_update_count) { bool update_sent = send_update_request(conn_handle, &p_instance->preferred_conn_params); if (update_sent) { p_instance->update_count++; } } else { p_instance->update_count = 0; // Negotiation failed, disconnect automatically if this has been configured if (m_conn_params_config.disconnect_on_fail) { ret_code_t err_code; err_code = sd_ble_gap_disconnect(conn_handle, BLE_HCI_CONN_INTERVAL_UNACCEPTABLE); if ((err_code != NRF_SUCCESS) && (err_code != NRF_ERROR_INVALID_STATE)) // NRF_ERROR_INVALID_STATE means disconnect is already in progress. { send_error_evt(err_code); } } // Notify the application that the procedure has failed if (m_conn_params_config.evt_handler != NULL) { ble_conn_params_evt_t evt; evt.evt_type = BLE_CONN_PARAMS_EVT_FAILED; evt.conn_handle = conn_handle; m_conn_params_config.evt_handler(&evt); } } } } ret_code_t ble_conn_params_init(const ble_conn_params_init_t * p_init) { ret_code_t err_code; VERIFY_PARAM_NOT_NULL(p_init); m_conn_params_config = *p_init; m_conn_params_config.p_conn_params = &m_preferred_conn_params; if (p_init->p_conn_params != NULL) { // Set the connection params in stack. err_code = sd_ble_gap_ppcp_set(p_init->p_conn_params); if (err_code != NRF_SUCCESS) { return err_code; } m_preferred_conn_params = *p_init->p_conn_params; } else { // Get the (default) connection params from stack. err_code = sd_ble_gap_ppcp_get(&m_preferred_conn_params); if (err_code != NRF_SUCCESS) { return err_code; } } //lint -save -e681 "Loop not entered" when NRF_BLE_CONN_PARAMS_INSTANCE_COUNT is 0 for (uint32_t i = 0; i < NRF_BLE_CONN_PARAMS_INSTANCE_COUNT; i++) { ble_conn_params_instance_t * p_instance = &m_conn_params_instances[i]; instance_free(p_instance); p_instance->timer_id = &m_timer_data[i]; err_code = app_timer_create(&p_instance->timer_id, APP_TIMER_MODE_SINGLE_SHOT, update_timeout_handler); if (err_code != NRF_SUCCESS) { return NRF_ERROR_INTERNAL; } } //lint -restore return NRF_SUCCESS; } ret_code_t ble_conn_params_stop(void) { ret_code_t err_code; //lint -save -e681 "Loop not entered" when NRF_BLE_CONN_PARAMS_INSTANCE_COUNT is 0 for (uint32_t i = 0; i < NRF_BLE_CONN_PARAMS_INSTANCE_COUNT; i++) { err_code = app_timer_stop(m_conn_params_instances[i].timer_id); switch (err_code) { case NRF_SUCCESS: /* do nothing */ break; case NRF_ERROR_INVALID_STATE: /* do nothing */ break; case NRF_ERROR_NO_MEM: return NRF_ERROR_BUSY; case NRF_ERROR_INVALID_PARAM: /* fallthrough */ default: return NRF_ERROR_INTERNAL; } } //lint -restore return NRF_SUCCESS; } /**@brief Function for taking appropriate action based on the current state of connection parameters. * * @param[in] conn_handle Connection to handle. * @param[in] p_instance Configuration for the connection. */ static void conn_params_negotiation(uint16_t conn_handle, ble_conn_params_instance_t * p_instance) { // Start negotiation if the received connection parameters are not acceptable if (!p_instance->params_ok) { ret_code_t err_code; uint32_t timeout_ticks; if (p_instance->update_count == 0) { // First connection parameter update timeout_ticks = m_conn_params_config.first_conn_params_update_delay; } else { timeout_ticks = m_conn_params_config.next_conn_params_update_delay; } err_code = app_timer_start(p_instance->timer_id, timeout_ticks, (void *)(uint32_t)conn_handle); if (err_code != NRF_SUCCESS) { send_error_evt(err_code); } } else { p_instance->update_count = 0; // Notify the application that the procedure has succeeded if (m_conn_params_config.evt_handler != NULL) { ble_conn_params_evt_t evt; evt.evt_type = BLE_CONN_PARAMS_EVT_SUCCEEDED; evt.conn_handle = conn_handle; m_conn_params_config.evt_handler(&evt); } } } /**@brief Function for handling a connection event from the SoftDevice. * * @param[in] p_ble_evt Event from the SoftDevice. */ static void on_connect(ble_evt_t const * p_ble_evt) { uint8_t role = p_ble_evt->evt.gap_evt.params.connected.role; uint16_t conn_handle = p_ble_evt->evt.gap_evt.conn_handle; if (role != BLE_GAP_ROLE_PERIPH) { return; } ble_conn_params_instance_t * p_instance = instance_get(BLE_CONN_HANDLE_INVALID); if (p_instance == NULL) { send_error_evt(NRF_ERROR_NO_MEM); return; } instance_claim(p_instance, conn_handle); p_instance->params_ok = is_conn_params_ok(&p_instance->preferred_conn_params, &p_ble_evt->evt.gap_evt.params.connected.conn_params, NRF_BLE_CONN_PARAMS_MAX_SLAVE_LATENCY_DEVIATION, NRF_BLE_CONN_PARAMS_MAX_SUPERVISION_TIMEOUT_DEVIATION); // Check if we shall handle negotiation on connect if (m_conn_params_config.start_on_notify_cccd_handle == BLE_GATT_HANDLE_INVALID) { conn_params_negotiation(conn_handle, p_instance); } } /**@brief Function for handling a disconnection event from the SoftDevice. * * @param[in] p_ble_evt Event from the SoftDevice. */ static void on_disconnect(ble_evt_t const * p_ble_evt) { ret_code_t err_code; uint16_t conn_handle = p_ble_evt->evt.gap_evt.conn_handle; ble_conn_params_instance_t * p_instance = instance_get(conn_handle); if (p_instance != NULL) { // Stop timer if running err_code = app_timer_stop(p_instance->timer_id); if (err_code != NRF_SUCCESS) { send_error_evt(err_code); } instance_free(p_instance); } } /**@brief Function for handling a GATT write event from the SoftDevice. * * @details To provide the start_on_notify_cccd_handle functionality. * * @param[in] p_ble_evt Event from the SoftDevice. */ static void on_write(ble_evt_t const * p_ble_evt) { ble_gatts_evt_write_t const * p_evt_write = &p_ble_evt->evt.gatts_evt.params.write; // Check if this is the correct CCCD if ( (p_evt_write->handle == m_conn_params_config.start_on_notify_cccd_handle) && (p_evt_write->len == 2) ) { uint16_t conn_handle = p_ble_evt->evt.gap_evt.conn_handle; ble_conn_params_instance_t * p_instance = instance_get(conn_handle); if (p_instance != NULL) { // Check if this is a 'start notification' if (ble_srv_is_notification_enabled(p_evt_write->data)) { // Do connection parameter negotiation if necessary conn_params_negotiation(conn_handle, p_instance); } else { ret_code_t err_code; // Stop timer if running err_code = app_timer_stop(p_instance->timer_id); if (err_code != NRF_SUCCESS) { send_error_evt(err_code); } } } } } /**@brief Function for handling a connection parameter update event from the SoftDevice. * * @details This event means the peer central has changed the connection parameters or declined our * request. * * @param[in] p_ble_evt Event from the SoftDevice. */ static void on_conn_params_update(ble_evt_t const * p_ble_evt) { uint16_t conn_handle = p_ble_evt->evt.gap_evt.conn_handle; ble_conn_params_instance_t * p_instance = instance_get(conn_handle); if (p_instance != NULL) { p_instance->params_ok = is_conn_params_ok( &p_instance->preferred_conn_params, &p_ble_evt->evt.gap_evt.params.conn_param_update.conn_params, NRF_BLE_CONN_PARAMS_MAX_SLAVE_LATENCY_DEVIATION, NRF_BLE_CONN_PARAMS_MAX_SUPERVISION_TIMEOUT_DEVIATION); conn_params_negotiation(conn_handle, p_instance); } } /** * @brief Function for handling BLE events. * * @param[in] p_ble_evt Event received from the BLE stack. * @param[in] p_context Context. */ static void ble_evt_handler(ble_evt_t const * p_ble_evt, void * p_context) { switch (p_ble_evt->header.evt_id) { case BLE_GAP_EVT_CONNECTED: on_connect(p_ble_evt); break; case BLE_GAP_EVT_DISCONNECTED: on_disconnect(p_ble_evt); break; case BLE_GATTS_EVT_WRITE: on_write(p_ble_evt); break; case BLE_GAP_EVT_CONN_PARAM_UPDATE: on_conn_params_update(p_ble_evt); break; default: // No implementation needed. break; } } ret_code_t ble_conn_params_change_conn_params(uint16_t conn_handle, ble_gap_conn_params_t * p_new_params) { ret_code_t err_code = BLE_ERROR_INVALID_CONN_HANDLE; ble_conn_params_instance_t * p_instance = instance_get(conn_handle); if (p_new_params == NULL) { p_new_params = &m_preferred_conn_params; } if (p_instance != NULL) { // Send request to central. err_code = sd_ble_gap_conn_param_update(conn_handle, p_new_params); if (err_code == NRF_SUCCESS) { p_instance->params_ok = false; p_instance->update_count = 1; p_instance->preferred_conn_params = *p_new_params; } } return err_code; } NRF_SDH_BLE_OBSERVER(m_ble_observer, BLE_CONN_PARAMS_BLE_OBSERVER_PRIO, ble_evt_handler, NULL); #endif //ENABLED