/** * Copyright (c) 2015 - 2018, Nordic Semiconductor ASA * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ #ifndef NRFX_UART_H__ #define NRFX_UART_H__ #include #include #ifdef __cplusplus extern "C" { #endif /** * @defgroup nrfx_uart UART driver * @{ * @ingroup nrf_uart * @brief UART peripheral driver. */ /** * @brief UART driver instance data structure. */ typedef struct { NRF_UART_Type * p_reg; ///< Pointer to a structure with UART registers. uint8_t drv_inst_idx; ///< Driver instance index. } nrfx_uart_t; enum { #if NRFX_CHECK(NRFX_UART0_ENABLED) NRFX_UART0_INST_IDX, #endif NRFX_UART_ENABLED_COUNT }; /** * @brief Macro for creating a UART driver instance. */ #define NRFX_UART_INSTANCE(id) \ { \ .p_reg = NRFX_CONCAT_2(NRF_UART, id), \ .drv_inst_idx = NRFX_CONCAT_3(NRFX_UART, id, _INST_IDX), \ } /** * @brief Types of UART driver events. */ typedef enum { NRFX_UART_EVT_TX_DONE, ///< Requested TX transfer completed. NRFX_UART_EVT_RX_DONE, ///< Requested RX transfer completed. NRFX_UART_EVT_ERROR, ///< Error reported by UART peripheral. } nrfx_uart_evt_type_t; /** * @brief Structure for UART configuration. */ typedef struct { uint32_t pseltxd; ///< TXD pin number. uint32_t pselrxd; ///< RXD pin number. uint32_t pselcts; ///< CTS pin number. uint32_t pselrts; ///< RTS pin number. void * p_context; ///< Context passed to interrupt handler. nrf_uart_hwfc_t hwfc; ///< Flow control configuration. nrf_uart_parity_t parity; ///< Parity configuration. nrf_uart_baudrate_t baudrate; ///< Baudrate. uint8_t interrupt_priority; ///< Interrupt priority. } nrfx_uart_config_t; /** * @brief UART default configuration. */ #define NRFX_UART_DEFAULT_CONFIG \ { \ .pseltxd = NRF_UART_PSEL_DISCONNECTED, \ .pselrxd = NRF_UART_PSEL_DISCONNECTED, \ .pselcts = NRF_UART_PSEL_DISCONNECTED, \ .pselrts = NRF_UART_PSEL_DISCONNECTED, \ .p_context = NULL, \ .hwfc = (nrf_uart_hwfc_t)NRFX_UART_DEFAULT_CONFIG_HWFC, \ .parity = (nrf_uart_parity_t)NRFX_UART_DEFAULT_CONFIG_PARITY, \ .baudrate = (nrf_uart_baudrate_t)NRFX_UART_DEFAULT_CONFIG_BAUDRATE, \ .interrupt_priority = NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY, \ } /** * @brief Structure for UART transfer completion event. */ typedef struct { uint8_t * p_data; ///< Pointer to memory used for transfer. uint32_t bytes; ///< Number of bytes transfered. } nrfx_uart_xfer_evt_t; /** * @brief Structure for UART error event. */ typedef struct { nrfx_uart_xfer_evt_t rxtx; ///< Transfer details includes number of bytes transferred. uint32_t error_mask; ///< Mask of error flags that generated the event. } nrfx_uart_error_evt_t; /** * @brief Structure for UART event. */ typedef struct { nrfx_uart_evt_type_t type; ///< Event type. union { nrfx_uart_xfer_evt_t rxtx; ///< Data provided for transfer completion events. nrfx_uart_error_evt_t error; ///< Data provided for error event. } data; } nrfx_uart_event_t; /** * @brief UART interrupt event handler. * * @param[in] p_event Pointer to event structure. Event is allocated on the stack so it is available * only within the context of the event handler. * @param[in] p_context Context passed to interrupt handler, set on initialization. */ typedef void (*nrfx_uart_event_handler_t)(nrfx_uart_event_t const * p_event, void * p_context); /** * @brief Function for initializing the UART driver. * * This function configures and enables UART. After this function GPIO pins are controlled by UART. * * @param[in] p_instance Pointer to the driver instance structure. * @param[in] p_config Pointer to the structure with initial configuration. * @param[in] event_handler Event handler provided by the user. If not provided driver works in * blocking mode. * * @retval NRFX_SUCCESS If initialization was successful. * @retval NRFX_ERROR_INVALID_STATE If driver is already initialized. * @retval NRFX_ERROR_BUSY If some other peripheral with the same * instance ID is already in use. This is * possible only if @ref nrfx_prs module * is enabled. */ nrfx_err_t nrfx_uart_init(nrfx_uart_t const * p_instance, nrfx_uart_config_t const * p_config, nrfx_uart_event_handler_t event_handler); /** * @brief Function for uninitializing the UART driver. * @param[in] p_instance Pointer to the driver instance structure. */ void nrfx_uart_uninit(nrfx_uart_t const * p_instance); /** * @brief Function for getting the address of a specific UART task. * * @param[in] p_instance Pointer to the driver instance structure. * @param[in] task Task. * * @return Task address. */ __STATIC_INLINE uint32_t nrfx_uart_task_address_get(nrfx_uart_t const * p_instance, nrf_uart_task_t task); /** * @brief Function for getting the address of a specific UART event. * * @param[in] p_instance Pointer to the driver instance structure. * @param[in] event Event. * * @return Event address. */ __STATIC_INLINE uint32_t nrfx_uart_event_address_get(nrfx_uart_t const * p_instance, nrf_uart_event_t event); /** * @brief Function for sending data over UART. * * If an event handler was provided in nrfx_uart_init() call, this function * returns immediately and the handler is called when the transfer is done. * Otherwise, the transfer is performed in blocking mode, i.e. this function * returns when the transfer is finished. Blocking mode is not using interrupt * so there is no context switching inside the function. * * @param[in] p_instance Pointer to the driver instance structure. * @param[in] p_data Pointer to data. * @param[in] length Number of bytes to send. * * @retval NRFX_SUCCESS If initialization was successful. * @retval NRFX_ERROR_BUSY If driver is already transferring. * @retval NRFX_ERROR_FORBIDDEN If the transfer was aborted from a different context * (blocking mode only). */ nrfx_err_t nrfx_uart_tx(nrfx_uart_t const * p_instance, uint8_t const * p_data, size_t length); /** * @brief Function for checking if UART is currently transmitting. * * @param[in] p_instance Pointer to the driver instance structure. * * @retval true If UART is transmitting. * @retval false If UART is not transmitting. */ bool nrfx_uart_tx_in_progress(nrfx_uart_t const * p_instance); /** * @brief Function for aborting any ongoing transmission. * @note @ref NRFX_UART_EVT_TX_DONE event will be generated in non-blocking mode. * It will contain number of bytes sent until abort was called. The event * handler will be called from the function context. * * @param[in] p_instance Pointer to the driver instance structure. */ void nrfx_uart_tx_abort(nrfx_uart_t const * p_instance); /** * @brief Function for receiving data over UART. * * If an event handler was provided in the nrfx_uart_init() call, this function * returns immediately and the handler is called when the transfer is done. * Otherwise, the transfer is performed in blocking mode, i.e. this function * returns when the transfer is finished. Blocking mode is not using interrupt so * there is no context switching inside the function. * The receive buffer pointer is double buffered in non-blocking mode. The secondary * buffer can be set immediately after starting the transfer and will be filled * when the primary buffer is full. The double buffering feature allows * receiving data continuously. * * @param[in] p_instance Pointer to the driver instance structure. * @param[in] p_data Pointer to data. * @param[in] length Number of bytes to receive. * * @retval NRFX_SUCCESS If initialization was successful. * @retval NRFX_ERROR_BUSY If the driver is already receiving * (and the secondary buffer has already been set * in non-blocking mode). * @retval NRFX_ERROR_FORBIDDEN If the transfer was aborted from a different context * (blocking mode only, also see @ref nrfx_uart_rx_disable). * @retval NRFX_ERROR_INTERNAL If UART peripheral reported an error. */ nrfx_err_t nrfx_uart_rx(nrfx_uart_t const * p_instance, uint8_t * p_data, size_t length); /** * @brief Function for testing the receiver state in blocking mode. * * @param[in] p_instance Pointer to the driver instance structure. * * @retval true If the receiver has at least one byte of data to get. * @retval false If the receiver is empty. */ bool nrfx_uart_rx_ready(nrfx_uart_t const * p_instance); /** * @brief Function for enabling the receiver. * * UART has a 6-byte-long RX FIFO and it is used to store incoming data. If a user does not call the * UART receive function before the FIFO is filled, an overrun error will appear. The receiver must be * explicitly closed by the user @sa nrfx_uart_rx_disable. * * @param[in] p_instance Pointer to the driver instance structure. */ void nrfx_uart_rx_enable(nrfx_uart_t const * p_instance); /** * @brief Function for disabling the receiver. * * This function must be called to close the receiver after it has been explicitly enabled by * @sa nrfx_uart_rx_enable. * * @param[in] p_instance Pointer to the driver instance structure. */ void nrfx_uart_rx_disable(nrfx_uart_t const * p_instance); /** * @brief Function for aborting any ongoing reception. * @note @ref NRFX_UART_EVT_TX_DONE event will be generated in non-blocking mode. * It will contain number of bytes received until abort was called. The event * handler will be called from the UART interrupt context. * * @param[in] p_instance Pointer to the driver instance structure. */ void nrfx_uart_rx_abort(nrfx_uart_t const * p_instance); /** * @brief Function for reading error source mask. Mask contains values from @ref nrf_uart_error_mask_t. * @note Function should be used in blocking mode only. In case of non-blocking mode, an error event is * generated. Function clears error sources after reading. * * @param[in] p_instance Pointer to the driver instance structure. * * @retval Mask of reported errors. */ uint32_t nrfx_uart_errorsrc_get(nrfx_uart_t const * p_instance); #ifndef SUPPRESS_INLINE_IMPLEMENTATION __STATIC_INLINE uint32_t nrfx_uart_task_address_get(nrfx_uart_t const * p_instance, nrf_uart_task_t task) { return nrf_uart_task_address_get(p_instance->p_reg, task); } __STATIC_INLINE uint32_t nrfx_uart_event_address_get(nrfx_uart_t const * p_instance, nrf_uart_event_t event) { return nrf_uart_event_address_get(p_instance->p_reg, event); } #endif // SUPPRESS_INLINE_IMPLEMENTATION void nrfx_uart_0_irq_handler(void); /** @} */ #ifdef __cplusplus } #endif #endif // NRFX_UART_H__