/** * Copyright (c) 2015 - 2018, Nordic Semiconductor ASA * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /**@file lwm2m_objects.h * * @defgroup iot_sdk_ipso_objects IPSO Smart Object definititions and types * @ingroup iot_sdk_lwm2m * @{ * @brief IPSO objects definitions and types. * * @note The definitions used in this module are from the IPSO Alliance * "IPSO SmartOject Guideline - Smart Objects Starter Pack1.0". * The specification could be found at http://www.ipso-alliance.org/. */ #ifndef IPSO_OBJECTS_H__ #define IPSO_OBJECTS_H__ #include "lwm2m_api.h" #ifdef __cplusplus extern "C" { #endif #define IPSO_SO_ID_DIGITAL_INPUT 3200 #define IPSO_SO_ID_DIGITAL_OUTPUT 3201 #define IPSO_SO_ID_ANALOGUE_INPUT 3202 #define IPSO_SO_ID_ANALOGUE_OUTPUT 3203 #define IPSO_SO_ID_GENERIC_SENSOR 3300 #define IPSO_SO_ID_ILLUMINANCE_SENSOR 3301 #define IPSO_SO_ID_PRESENCE_SENSOR 3302 #define IPSO_SO_ID_TEMPERATURE_SENSOR 3303 #define IPSO_SO_ID_HUMIDITY_SENSOR 3304 #define IPSO_SO_ID_POWER_MEASUREMENT 3305 #define IPSO_SO_ID_ACTUATION 3306 #define IPSO_SO_ID_SET_POINT 3308 #define IPSO_SO_ID_LOAD_CONTROL 3310 #define IPSO_SO_ID_LIGHT_CONTROL 3311 #define IPSO_SO_ID_POWER_CONTROL 3312 #define IPSO_SO_ID_ACCELEROMETER 3313 #define IPSO_SO_ID_MAGNETOMETER 3314 #define IPSO_SO_ID_BAROMETER 3315 /** @brief IPSO Reusable Resource IDs (Section 21). */ #define IPSO_RR_ID_DIGITAL_INPUT_STATE 5500 #define IPSO_RR_ID_DIGITAL_INPUT_COUNTER 5501 #define IPSO_RR_ID_DIGITAL_INPUT_POLARITY 5502 #define IPSO_RR_ID_DIGITAL_INPUT_DEBOUNCE_PERIOD 5503 #define IPSO_RR_ID_DIGITAL_INPUT_EDGE_SELECTION 5504 #define IPSO_RR_ID_DIGITAL_INPUT_COUNTER_RESET 5505 #define IPSO_RR_ID_DIGITAL_OUTPUT_STATE 5550 #define IPSO_RR_ID_DIGITAL_OUTPUT_POLARITY 5551 // Digital output polarity options. #define IPSO_RR_ID_DIGITAL_OUTPUT_POLARITY_NORMAL 0 #define IPSO_RR_ID_DIGITAL_OUTPUT_POLARITY_REVERSED 1 #define IPSO_RR_ID_ANALOG_INPUT_CURRENT_VALUE 5600 #define IPSO_RR_ID_MIN_MEASURED_VALUE 5601 #define IPSO_RR_ID_MAX_MEASURED_VALUE 5602 #define IPSO_RR_ID_MIN_RANGE_VALUE 5603 #define IPSO_RR_ID_MAX_RANGE_VALUE 5604 #define IPSO_RR_ID_RESET_MIN_MAX_MEASURED_VALUES 5605 #define IPSO_RR_ID_ANALOG_OUTPUT_CURRENT_VALUE 5650 #define IPSO_RR_ID_SENSOR_VALUE 5700 #define IPSO_RR_ID_SENSOR_UNITS 5701 #define IPSO_RR_ID_X_VALUE 5702 #define IPSO_RR_ID_Y_VALUE 5703 #define IPSO_RR_ID_Z_VALUE 5704 #define IPSO_RR_ID_COMPASS_DIRECTION 5705 #define IPSO_RR_ID_COLOUR 5706 #define IPSO_RR_ID_APPLICATION_TYPE 5750 #define IPSO_RR_ID_SENSOR_TYPE 5751 #define IPSO_RR_ID_INSTANTANEOUS_ACTIVE_POWER 5800 #define IPSO_RR_ID_MIN_MEASURED_ACTIVE_POWER 5801 #define IPSO_RR_ID_MAX_MEASURED_ACTIVE_POWER 5802 #define IPSO_RR_ID_MIN_RANGE_ACTIVE_POWER 5803 #define IPSO_RR_ID_MAX_RANGE_ACTIVE_POWER 5804 #define IPSO_RR_ID_CUMULATIVE_ACTIVE_POWER 5805 #define IPSO_RR_ID_ACTIVE_POWER_CALIBRATION 5806 #define IPSO_RR_ID_INSTANTANEOUS_REACTIVE_POWER 5810 #define IPSO_RR_ID_MIN_MEASURED_REACTIVE_POWER 5811 #define IPSO_RR_ID_MAX_MEASURED_REACTIVE_POWER 5812 #define IPSO_RR_ID_MIN_RANGE_REACTIVE_POWER 5813 #define IPSO_RR_ID_MAX_RANGE_REACTIVE_POWER 5814 #define IPSO_RR_ID_CUMULATIVE_REACTIVE_POWER 5815 #define IPSO_RR_ID_REACTIVE_POWER_CALIBRATION 5816 #define IPSO_RR_ID_POWER_FACTOR 5820 #define IPSO_RR_ID_CURRENT_CALIBRATION 5821 #define IPSO_RR_ID_RESET_CUMULATIVE_ENERGY 5822 #define IPSO_RR_ID_EVENT_IDENTIFIER 5823 #define IPSO_RR_ID_START_TIME 5824 #define IPSO_RR_ID_DURATION_IN_MIN 5825 #define IPSO_RR_ID_CRITICALITY_LEVEL 5826 #define IPSO_RR_ID_AVG_LOAD_ADJPCT 5827 #define IPSO_RR_ID_DUTY_CYCLE 5828 #define IPSO_RR_ID_ON_OFF 5850 #define IPSO_RR_ID_DIMMER 5851 #define IPSO_RR_ID_ON_TIME 5852 #define IPSO_RR_ID_MULTI_STATE_OUTPUT 5853 #define IPSO_RR_ID_SETPOINT_VALUE 5900 #define IPSO_RR_ID_BUSY_TO_CLEAR_DELAY 5903 #define IPSO_RR_ID_CLEAR_TO_BUSY_DELAY 5904 /* Digital input ID: 3200 */ typedef struct { lwm2m_instance_prototype_t proto; /* Internal. */ uint8_t operations[8]; /* Internal. */ uint16_t resource_ids[8]; /* Internal. */ /* Public members. */ bool state; uint32_t counter; bool polarity; uint32_t debounce_period; /* Unit: milliseconds */ uint8_t edge_selection; /* Range: 1-3 */ /* Counter reset is execute only */ lwm2m_string_t application_type; lwm2m_string_t sensor_type; } ipso_digital_input_t; /* Digital output ID: 3201 */ typedef struct { lwm2m_instance_prototype_t proto; /* Internal. MUST be first. */ uint8_t operations[3]; /* Internal. MUST be second. */ uint16_t resource_ids[3]; /* Internal. MUST be third. */ /* Public members. */ bool digital_output_state; bool digital_output_polarity; lwm2m_string_t application_type; } ipso_digital_output_t; /* Analog input ID: 3202 */ typedef struct { lwm2m_instance_prototype_t proto; /* Internal. */ uint8_t operations[8]; /* Internal. */ uint16_t resource_ids[8]; /* Internal. */ /* Public members. */ float current_value; float min_measured_value; float max_measured_value; float min_range_value; float max_range_value; /* Reset min and max measured values is execute only */ lwm2m_string_t application_type; lwm2m_string_t sensor_type; } ipso_analog_input_t; /* Analog output ID: 3203 */ typedef struct { lwm2m_instance_prototype_t proto; /* Internal. */ uint8_t operations[4]; /* Internal. */ uint16_t resource_ids[4]; /* Internal. */ /* Public members. */ float current_value; float min_range_value; float max_range_value; lwm2m_string_t application_type; } ipso_analog_output_t; /* Generic sensor ID: 3300 */ typedef struct { lwm2m_instance_prototype_t proto; /* Internal. */ uint8_t operations[9]; /* Internal. */ uint16_t resource_ids[9]; /* Internal. */ /* Public members. */ float sensor_value; lwm2m_string_t units; float min_measured_value; float max_measured_value; float min_range_value; float max_range_value; /* Reset min and max measured values is execute only */ lwm2m_string_t application_type; lwm2m_string_t sensor_type; } ipso_generic_sensor_t; /* Illuminance ID: 3301 */ typedef struct { lwm2m_instance_prototype_t proto; /* Internal. */ uint8_t operations[7]; /* Internal. */ uint16_t resource_ids[7]; /* Internal. */ /* Public members. */ float sensor_value; lwm2m_string_t units; float min_measured_value; float max_measured_value; float min_range_value; float max_range_value; /* Reset min and max measured values is execute only */ } ipso_illuminance_t; /* Presence ID: 3302 */ typedef struct { lwm2m_instance_prototype_t proto; /* Internal. */ uint8_t operations[8]; /* Internal. */ uint16_t resource_ids[8]; /* Internal. */ /* Public members. */ bool digital_input_state; uint32_t digital_input_counter; /* Digital input counter reset is execute only */ lwm2m_string_t sensor_type; uint32_t busy_to_clear_delay; // Unit: ms uint32_t clear_to_busy_delay; // Unit: ms } ipso_presence_t; /* Temperature ID: 3303 */ typedef struct { lwm2m_instance_prototype_t proto; /* Internal. */ uint8_t operations[7]; /* Internal. */ uint16_t resource_ids[7]; /* Internal. */ /* Public members. */ float sensor_value; lwm2m_string_t units; float min_measured_value; float max_measured_value; float min_range_value; float max_range_value; /* Reset min and max measured values is execute only */ } ipso_temperature_t; /* Humidity ID: 3304 */ typedef struct { lwm2m_instance_prototype_t proto; /* Internal. */ uint8_t operations[8]; /* Internal. */ uint16_t resource_ids[8]; /* Internal. */ /* Public members. */ float sensor_value; lwm2m_string_t units; float min_measured_value; float max_measured_value; float min_range_value; float max_range_value; /* Reset min and max measured values is execute only */ } ipso_humidity_t; /* Power measurement ID: 3305 */ typedef struct { lwm2m_instance_prototype_t proto; /* Internal. */ uint8_t operations[18]; /* Internal. */ uint16_t resource_ids[18]; /* Internal. */ /* Public members. */ float instantaneous_active_power; float min_measured_active_power; float max_measured_active_power; float min_range_active_power; float max_range_active_power; float cumulative_active_power; float active_power_calibration; float instantaneous_reactive_power; float min_measured_reactive_power; float max_measured_reactive_power; float min_range_reactive_power; float max_range_reactive_power; /* Reset min and max measured values is execute only */ float cumulative_reactive_power; float reactive_power_calibration; float power_factor; float current_calibration; /* Reset cumulative is execute only */ } ipso_power_measurement_t; /* Actuation ID: 3306 */ typedef struct { lwm2m_instance_prototype_t proto; /* Internal. */ uint8_t operations[5]; /* Internal. */ uint16_t resource_ids[5]; /* Internal. */ /* Public members. */ bool on; uint16_t dimmer; // Unit: % Range: 0 - 100 uint32_t on_time; // Unit: s lwm2m_string_t multi_state_output; lwm2m_string_t application_type; } ipso_actuation_t; /* Set point ID: 3308 */ typedef struct { lwm2m_instance_prototype_t proto; /* Internal. */ uint8_t operations[4]; /* Internal. */ uint16_t resource_ids[4]; /* Internal. */ /* Public members. */ float set_point_value; lwm2m_string_t colour; lwm2m_string_t units; lwm2m_string_t application_type; } ipso_set_point_t; /* Load control ID: 3310 */ typedef struct { lwm2m_instance_prototype_t proto; /* Internal. */ uint8_t operations[6]; /* Internal. */ uint16_t resource_ids[6]; /* Internal. */ /* Public members. */ lwm2m_string_t event_identifier; lwm2m_time_t start_time; uint32_t duration_in_min; uint8_t criticality_level; // Range: 0-3 uint16_t avg_load_adjpct; // Unit: % range: 0-100 uint16_t duty_cycle; // Unit: % range: 0-100 } ipso_load_control_t; /* Light control ID: 3311 */ typedef struct { lwm2m_instance_prototype_t proto; /* Internal. */ uint8_t operations[7]; /* Internal. */ uint16_t resource_ids[7]; /* Internal. */ /* Public members. */ bool on; uint16_t dimmer; // Unit: % Range: 0 - 100 lwm2m_string_t colour; lwm2m_string_t units; uint32_t on_time; // Unit: s float cumulative_active_power; float power_factor; } ipso_light_control_t; /* Power control ID: 3312 */ typedef struct { lwm2m_instance_prototype_t proto; /* Internal. */ uint8_t operations[5]; /* Internal. */ uint16_t resource_ids[5]; /* Internal. */ /* Public members. */ bool on; uint16_t dimmer; // Unit: % Range: 0 - 100 uint32_t on_time; // Unit: s float cumulative_active_power; float power_factor; } ipso_power_control_t; /* Accelerometer ID: 3313 */ typedef struct { lwm2m_instance_prototype_t proto; /* Internal. */ uint8_t operations[6]; /* Internal. */ uint16_t resource_ids[6]; /* Internal. */ /* Public members. */ float x_value; float y_value; float z_value; lwm2m_string_t units; float min_range_value; float max_range_value; } ipso_accelerometer_t; /* Magnetometer ID: 3314 */ typedef struct { lwm2m_instance_prototype_t proto; /* Internal. */ uint8_t operations[8]; /* Internal. */ uint16_t resource_ids[8]; /* Internal. */ /* Public members. */ float x_value; float y_value; float z_value; lwm2m_string_t units; float compass_direction; // Unit: deg Range: 0-360 } ipso_magnetometer_t; /* Barometer ID: 3315 */ typedef struct { lwm2m_instance_prototype_t proto; /* Internal. */ uint8_t operations[7]; /* Internal. */ uint16_t resource_ids[7]; /* Internal. */ /* Public members. */ float sensor_value; lwm2m_string_t units; float min_measured_value; float max_measured_value; float min_range_value; float max_range_value; /* Reset min and max measured values is execute only */ } ipso_barometer_t; /**@brief Initialize an IPSO digital input object instance. * * @details Must be called before any use of the instance. * * @param[in] p_instance Pointer to instance structure to initialize. */ void ipso_instance_digital_input_init(ipso_digital_input_t * p_instance); /**@brief Initialize an IPSO digital output object instance. * * @details Must be called before any use of the instance. * * @param[in] p_instance Pointer to instance structure to initialize. */ void ipso_instance_digital_output_init(ipso_digital_output_t * p_instance); /**@brief Initialize an IPSO analog input object instance. * * @details Must be called before any use of the instance. * * @param[in] p_instance Pointer to instance structure to initialize. */ void ipso_instance_analog_input_init(ipso_analog_input_t * p_instance); /**@brief Initialize an IPSO analog output object instance. * * @details Must be called before any use of the instance. * * @param[in] p_instance Pointer to instance structure to initialize. */ void ipso_instance_analog_output_init(ipso_analog_output_t * p_instance); /**@brief Initialize an IPSO generic sensor object instance. * * @details Must be called before any use of the instance. * * @param[in] p_instance Pointer to instance structure to initialize. */ void ipso_instance_generic_sensor_init(ipso_generic_sensor_t * p_instance); /**@brief Initialize an IPSO illuminance object instance. * * @details Must be called before any use of the instance. * * @param[in] p_instance Pointer to instance structure to initialize. */ void ipso_instance_illuminance_init(ipso_illuminance_t * p_instance); /**@brief Initialize an IPSO presence object instance. * * @details Must be called before any use of the instance. * * @param[in] p_instance Pointer to instance structure to initialize. */ void ipso_instance_presence_init(ipso_presence_t * p_instance); /**@brief Initialize an IPSO temperature object instance. * * @details Must be called before any use of the instance. * * @param[in] p_instance Pointer to instance structure to initialize. */ void ipso_instance_temperature_init(ipso_temperature_t * p_instance); /**@brief Initialize an IPSO humidity object instance. * * @details Must be called before any use of the instance. * * @param[in] p_instance Pointer to instance structure to initialize. */ void ipso_instance_humidity_init(ipso_humidity_t * p_instance); /**@brief Initialize an IPSO power measurement object instance. * * @details Must be called before any use of the instance. * * @param[in] p_instance Pointer to instance structure to initialize. */ void ipso_instance_power_measurement_init(ipso_power_measurement_t * p_instance); /**@brief Initialize an IPSO actuation object instance. * * @details Must be called before any use of the instance. * * @param[in] p_instance Pointer to instance structure to initialize. */ void ipso_instance_actuation_init(ipso_actuation_t * p_instance); /**@brief Initialize an IPSO set point object instance. * * @details Must be called before any use of the instance. * * @param[in] p_instance Pointer to instance structure to initialize. */ void ipso_instance_set_point_init(ipso_set_point_t * p_instance); /**@brief Initialize an IPSO load control object instance. * * @details Must be called before any use of the instance. * * @param[in] p_instance Pointer to instance structure to initialize. */ void ipso_instance_load_control_init(ipso_load_control_t * p_instance); /**@brief Initialize an IPSO light control object instance. * * @details Must be called before any use of the instance. * * @param[in] p_instance Pointer to instance structure to initialize. */ void ipso_instance_light_control_init(ipso_light_control_t * p_instance); /**@brief Initialize an IPSO power control object instance. * * @details Must be called before any use of the instance. * * @param[in] p_instance Pointer to instance structure to initialize. */ void ipso_instance_power_control_init(ipso_power_control_t * p_instance); /**@brief Initialize an IPSO accelerometer object instance. * * @details Must be called before any use of the instance. * * @param[in] p_instance Pointer to instance structure to initialize. */ void ipso_instance_accelerometer_init(ipso_accelerometer_t * p_instance); /**@brief Initialize an IPSO magnetometer object instance. * * @details Must be called before any use of the instance. * * @param[in] p_instance Pointer to instance structure to initialize. */ void ipso_instance_magnetometer_init(ipso_magnetometer_t * p_instance); /**@brief Initialize an IPSO barometer object instance. * * @details Must be called before any use of the instance. * * @param[in] p_instance Pointer to instance structure to initialize. */ void ipso_instance_barometer_init(ipso_barometer_t * p_instance); #ifdef __cplusplus } #endif #endif // LWM2M_OBJECTS_H__ /** @} */