/* * Copyright (c) Nordic Semiconductor ASA * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /** @addtogroup BLE_GATTC Generic Attribute Profile (GATT) Client @{ @brief Definitions and prototypes for the GATT Client interface. */ #ifndef BLE_GATTC_H__ #define BLE_GATTC_H__ #include #include "nrf.h" #include "nrf_svc.h" #include "nrf_error.h" #include "ble_ranges.h" #include "ble_types.h" #include "ble_err.h" #include "ble_gatt.h" #ifdef __cplusplus extern "C" { #endif /** @addtogroup BLE_GATTC_ENUMERATIONS Enumerations * @{ */ /**@brief GATTC API SVC numbers. */ enum BLE_GATTC_SVCS { SD_BLE_GATTC_PRIMARY_SERVICES_DISCOVER = BLE_GATTC_SVC_BASE, /**< Primary Service Discovery. */ SD_BLE_GATTC_RELATIONSHIPS_DISCOVER, /**< Relationship Discovery. */ SD_BLE_GATTC_CHARACTERISTICS_DISCOVER, /**< Characteristic Discovery. */ SD_BLE_GATTC_DESCRIPTORS_DISCOVER, /**< Characteristic Descriptor Discovery. */ SD_BLE_GATTC_ATTR_INFO_DISCOVER, /**< Attribute Information Discovery. */ SD_BLE_GATTC_CHAR_VALUE_BY_UUID_READ, /**< Read Characteristic Value by UUID. */ SD_BLE_GATTC_READ, /**< Generic read. */ SD_BLE_GATTC_CHAR_VALUES_READ, /**< Read multiple Characteristic Values. */ SD_BLE_GATTC_WRITE, /**< Generic write. */ SD_BLE_GATTC_HV_CONFIRM, /**< Handle Value Confirmation. */ SD_BLE_GATTC_EXCHANGE_MTU_REQUEST, /**< Exchange MTU Request. */ }; /** * @brief GATT Client Event IDs. */ enum BLE_GATTC_EVTS { BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP = BLE_GATTC_EVT_BASE, /**< Primary Service Discovery Response event. \n See @ref ble_gattc_evt_prim_srvc_disc_rsp_t. */ BLE_GATTC_EVT_REL_DISC_RSP, /**< Relationship Discovery Response event. \n See @ref ble_gattc_evt_rel_disc_rsp_t. */ BLE_GATTC_EVT_CHAR_DISC_RSP, /**< Characteristic Discovery Response event. \n See @ref ble_gattc_evt_char_disc_rsp_t. */ BLE_GATTC_EVT_DESC_DISC_RSP, /**< Descriptor Discovery Response event. \n See @ref ble_gattc_evt_desc_disc_rsp_t. */ BLE_GATTC_EVT_ATTR_INFO_DISC_RSP, /**< Attribute Information Response event. \n See @ref ble_gattc_evt_attr_info_disc_rsp_t. */ BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP, /**< Read By UUID Response event. \n See @ref ble_gattc_evt_char_val_by_uuid_read_rsp_t. */ BLE_GATTC_EVT_READ_RSP, /**< Read Response event. \n See @ref ble_gattc_evt_read_rsp_t. */ BLE_GATTC_EVT_CHAR_VALS_READ_RSP, /**< Read multiple Response event. \n See @ref ble_gattc_evt_char_vals_read_rsp_t. */ BLE_GATTC_EVT_WRITE_RSP, /**< Write Response event. \n See @ref ble_gattc_evt_write_rsp_t. */ BLE_GATTC_EVT_HVX, /**< Handle Value Notification or Indication event. \n Confirm indication with @ref sd_ble_gattc_hv_confirm. \n See @ref ble_gattc_evt_hvx_t. */ BLE_GATTC_EVT_EXCHANGE_MTU_RSP, /**< Exchange MTU Response event. \n See @ref ble_gattc_evt_exchange_mtu_rsp_t. */ BLE_GATTC_EVT_TIMEOUT, /**< Timeout event. \n See @ref ble_gattc_evt_timeout_t. */ BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE /**< Write without Response transmission complete. \n See @ref ble_gattc_evt_write_cmd_tx_complete_t. */ }; /** @} */ /** @addtogroup BLE_GATTC_DEFINES Defines * @{ */ /** @defgroup BLE_ERRORS_GATTC SVC return values specific to GATTC * @{ */ #define BLE_ERROR_GATTC_PROC_NOT_PERMITTED (NRF_GATTC_ERR_BASE + 0x000) /**< Procedure not Permitted. */ /** @} */ /** @defgroup BLE_GATTC_ATTR_INFO_FORMAT Attribute Information Formats * @{ */ #define BLE_GATTC_ATTR_INFO_FORMAT_16BIT 1 /**< 16-bit Attribute Information Format. */ #define BLE_GATTC_ATTR_INFO_FORMAT_128BIT 2 /**< 128-bit Attribute Information Format. */ /** @} */ /** @defgroup BLE_GATTC_DEFAULTS GATT Client defaults * @{ */ #define BLE_GATTC_WRITE_CMD_TX_QUEUE_SIZE_DEFAULT 1 /**< Default number of Write without Response that can be queued for transmission. */ /** @} */ /** @} */ /** @addtogroup BLE_GATTC_STRUCTURES Structures * @{ */ /** * @brief BLE GATTC connection configuration parameters, set with @ref sd_ble_cfg_set. */ typedef struct { uint8_t write_cmd_tx_queue_size; /**< The guaranteed minimum number of Write without Response that can be queued for transmission. The default value is @ref BLE_GATTC_WRITE_CMD_TX_QUEUE_SIZE_DEFAULT */ } ble_gattc_conn_cfg_t; /**@brief Operation Handle Range. */ typedef struct { uint16_t start_handle; /**< Start Handle. */ uint16_t end_handle; /**< End Handle. */ } ble_gattc_handle_range_t; /**@brief GATT service. */ typedef struct { ble_uuid_t uuid; /**< Service UUID. */ ble_gattc_handle_range_t handle_range; /**< Service Handle Range. */ } ble_gattc_service_t; /**@brief GATT include. */ typedef struct { uint16_t handle; /**< Include Handle. */ ble_gattc_service_t included_srvc; /**< Handle of the included service. */ } ble_gattc_include_t; /**@brief GATT characteristic. */ typedef struct { ble_uuid_t uuid; /**< Characteristic UUID. */ ble_gatt_char_props_t char_props; /**< Characteristic Properties. */ uint8_t char_ext_props : 1; /**< Extended properties present. */ uint16_t handle_decl; /**< Handle of the Characteristic Declaration. */ uint16_t handle_value; /**< Handle of the Characteristic Value. */ } ble_gattc_char_t; /**@brief GATT descriptor. */ typedef struct { uint16_t handle; /**< Descriptor Handle. */ ble_uuid_t uuid; /**< Descriptor UUID. */ } ble_gattc_desc_t; /**@brief Write Parameters. */ typedef struct { uint8_t write_op; /**< Write Operation to be performed, see @ref BLE_GATT_WRITE_OPS. */ uint8_t flags; /**< Flags, see @ref BLE_GATT_EXEC_WRITE_FLAGS. */ uint16_t handle; /**< Handle to the attribute to be written. */ uint16_t offset; /**< Offset in bytes. @note For WRITE_CMD and WRITE_REQ, offset must be 0. */ uint16_t len; /**< Length of data in bytes. */ uint8_t const *p_value; /**< Pointer to the value data. */ } ble_gattc_write_params_t; /**@brief Attribute Information for 16-bit Attribute UUID. */ typedef struct { uint16_t handle; /**< Attribute handle. */ ble_uuid_t uuid; /**< 16-bit Attribute UUID. */ } ble_gattc_attr_info16_t; /**@brief Attribute Information for 128-bit Attribute UUID. */ typedef struct { uint16_t handle; /**< Attribute handle. */ ble_uuid128_t uuid; /**< 128-bit Attribute UUID. */ } ble_gattc_attr_info128_t; /**@brief Event structure for @ref BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP. */ typedef struct { uint16_t count; /**< Service count. */ ble_gattc_service_t services[1]; /**< Service data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ } ble_gattc_evt_prim_srvc_disc_rsp_t; /**@brief Event structure for @ref BLE_GATTC_EVT_REL_DISC_RSP. */ typedef struct { uint16_t count; /**< Include count. */ ble_gattc_include_t includes[1]; /**< Include data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ } ble_gattc_evt_rel_disc_rsp_t; /**@brief Event structure for @ref BLE_GATTC_EVT_CHAR_DISC_RSP. */ typedef struct { uint16_t count; /**< Characteristic count. */ ble_gattc_char_t chars[1]; /**< Characteristic data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ } ble_gattc_evt_char_disc_rsp_t; /**@brief Event structure for @ref BLE_GATTC_EVT_DESC_DISC_RSP. */ typedef struct { uint16_t count; /**< Descriptor count. */ ble_gattc_desc_t descs[1]; /**< Descriptor data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ } ble_gattc_evt_desc_disc_rsp_t; /**@brief Event structure for @ref BLE_GATTC_EVT_ATTR_INFO_DISC_RSP. */ typedef struct { uint16_t count; /**< Attribute count. */ uint8_t format; /**< Attribute information format, see @ref BLE_GATTC_ATTR_INFO_FORMAT. */ union { ble_gattc_attr_info16_t attr_info16[1]; /**< Attribute information for 16-bit Attribute UUID. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ ble_gattc_attr_info128_t attr_info128[1]; /**< Attribute information for 128-bit Attribute UUID. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ } info; /**< Attribute information union. */ } ble_gattc_evt_attr_info_disc_rsp_t; /**@brief GATT read by UUID handle value pair. */ typedef struct { uint16_t handle; /**< Attribute Handle. */ uint8_t *p_value; /**< Pointer to the Attribute Value, length is available in @ref ble_gattc_evt_char_val_by_uuid_read_rsp_t::value_len. */ } ble_gattc_handle_value_t; /**@brief Event structure for @ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP. */ typedef struct { uint16_t count; /**< Handle-Value Pair Count. */ uint16_t value_len; /**< Length of the value in Handle-Value(s) list. */ uint8_t handle_value[1]; /**< Handle-Value(s) list. To iterate through the list use @ref sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ } ble_gattc_evt_char_val_by_uuid_read_rsp_t; /**@brief Event structure for @ref BLE_GATTC_EVT_READ_RSP. */ typedef struct { uint16_t handle; /**< Attribute Handle. */ uint16_t offset; /**< Offset of the attribute data. */ uint16_t len; /**< Attribute data length. */ uint8_t data[1]; /**< Attribute data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ } ble_gattc_evt_read_rsp_t; /**@brief Event structure for @ref BLE_GATTC_EVT_CHAR_VALS_READ_RSP. */ typedef struct { uint16_t len; /**< Concatenated Attribute values length. */ uint8_t values[1]; /**< Attribute values. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ } ble_gattc_evt_char_vals_read_rsp_t; /**@brief Event structure for @ref BLE_GATTC_EVT_WRITE_RSP. */ typedef struct { uint16_t handle; /**< Attribute Handle. */ uint8_t write_op; /**< Type of write operation, see @ref BLE_GATT_WRITE_OPS. */ uint16_t offset; /**< Data offset. */ uint16_t len; /**< Data length. */ uint8_t data[1]; /**< Data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ } ble_gattc_evt_write_rsp_t; /**@brief Event structure for @ref BLE_GATTC_EVT_HVX. */ typedef struct { uint16_t handle; /**< Handle to which the HVx operation applies. */ uint8_t type; /**< Indication or Notification, see @ref BLE_GATT_HVX_TYPES. */ uint16_t len; /**< Attribute data length. */ uint8_t data[1]; /**< Attribute data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ } ble_gattc_evt_hvx_t; /**@brief Event structure for @ref BLE_GATTC_EVT_EXCHANGE_MTU_RSP. */ typedef struct { uint16_t server_rx_mtu; /**< Server RX MTU size. */ } ble_gattc_evt_exchange_mtu_rsp_t; /**@brief Event structure for @ref BLE_GATTC_EVT_TIMEOUT. */ typedef struct { uint8_t src; /**< Timeout source, see @ref BLE_GATT_TIMEOUT_SOURCES. */ } ble_gattc_evt_timeout_t; /**@brief Event structure for @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE. */ typedef struct { uint8_t count; /**< Number of write without response transmissions completed. */ } ble_gattc_evt_write_cmd_tx_complete_t; /**@brief GATTC event structure. */ typedef struct { uint16_t conn_handle; /**< Connection Handle on which event occurred. */ uint16_t gatt_status; /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */ uint16_t error_handle; /**< In case of error: The handle causing the error. In all other cases @ref BLE_GATT_HANDLE_INVALID. */ union { ble_gattc_evt_prim_srvc_disc_rsp_t prim_srvc_disc_rsp; /**< Primary Service Discovery Response Event Parameters. */ ble_gattc_evt_rel_disc_rsp_t rel_disc_rsp; /**< Relationship Discovery Response Event Parameters. */ ble_gattc_evt_char_disc_rsp_t char_disc_rsp; /**< Characteristic Discovery Response Event Parameters. */ ble_gattc_evt_desc_disc_rsp_t desc_disc_rsp; /**< Descriptor Discovery Response Event Parameters. */ ble_gattc_evt_char_val_by_uuid_read_rsp_t char_val_by_uuid_read_rsp; /**< Characteristic Value Read by UUID Response Event Parameters. */ ble_gattc_evt_read_rsp_t read_rsp; /**< Read Response Event Parameters. */ ble_gattc_evt_char_vals_read_rsp_t char_vals_read_rsp; /**< Characteristic Values Read Response Event Parameters. */ ble_gattc_evt_write_rsp_t write_rsp; /**< Write Response Event Parameters. */ ble_gattc_evt_hvx_t hvx; /**< Handle Value Notification/Indication Event Parameters. */ ble_gattc_evt_exchange_mtu_rsp_t exchange_mtu_rsp; /**< Exchange MTU Response Event Parameters. */ ble_gattc_evt_timeout_t timeout; /**< Timeout Event Parameters. */ ble_gattc_evt_attr_info_disc_rsp_t attr_info_disc_rsp; /**< Attribute Information Discovery Event Parameters. */ ble_gattc_evt_write_cmd_tx_complete_t write_cmd_tx_complete; /**< Write without Response transmission complete Event Parameters. */ } params; /**< Event Parameters. @note Only valid if @ref gatt_status == @ref BLE_GATT_STATUS_SUCCESS. */ } ble_gattc_evt_t; /** @} */ /** @addtogroup BLE_GATTC_FUNCTIONS Functions * @{ */ /**@brief Initiate or continue a GATT Primary Service Discovery procedure. * * @details This function initiates or resumes a Primary Service discovery procedure, starting from the supplied handle. * If the last service has not been reached, this function must be called again with an updated start handle value to continue the search. * * @note If any of the discovered services have 128-bit UUIDs which are not present in the table provided to @ref sd_ble_uuid_vs_add, a UUID structure with * type @ref BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event. * * @events * @event{@ref BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP} * @endevents * * @mscs * @mmsc{@ref BLE_GATTC_PRIM_SRVC_DISC_MSC} * @endmscs * * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. * @param[in] start_handle Handle to start searching from. * @param[in] p_srvc_uuid Pointer to the service UUID to be found. If it is NULL, all primary services will be returned. * * @retval ::NRF_SUCCESS Successfully started or resumed the Primary Service Discovery procedure. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. * @retval ::NRF_ERROR_BUSY Client procedure already in progress. * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. */ SVCALL(SD_BLE_GATTC_PRIMARY_SERVICES_DISCOVER, uint32_t, sd_ble_gattc_primary_services_discover(uint16_t conn_handle, uint16_t start_handle, ble_uuid_t const *p_srvc_uuid)); /**@brief Initiate or continue a GATT Relationship Discovery procedure. * * @details This function initiates or resumes the Find Included Services sub-procedure. If the last included service has not been reached, * this must be called again with an updated handle range to continue the search. * * @events * @event{@ref BLE_GATTC_EVT_REL_DISC_RSP} * @endevents * * @mscs * @mmsc{@ref BLE_GATTC_REL_DISC_MSC} * @endmscs * * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. * @param[in] p_handle_range A pointer to the range of handles of the Service to perform this procedure on. * * @retval ::NRF_SUCCESS Successfully started or resumed the Relationship Discovery procedure. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. * @retval ::NRF_ERROR_BUSY Client procedure already in progress. * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. */ SVCALL(SD_BLE_GATTC_RELATIONSHIPS_DISCOVER, uint32_t, sd_ble_gattc_relationships_discover(uint16_t conn_handle, ble_gattc_handle_range_t const *p_handle_range)); /**@brief Initiate or continue a GATT Characteristic Discovery procedure. * * @details This function initiates or resumes a Characteristic discovery procedure. If the last Characteristic has not been reached, * this must be called again with an updated handle range to continue the discovery. * * @note If any of the discovered characteristics have 128-bit UUIDs which are not present in the table provided to @ref sd_ble_uuid_vs_add, a UUID structure with * type @ref BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event. * * @events * @event{@ref BLE_GATTC_EVT_CHAR_DISC_RSP} * @endevents * * @mscs * @mmsc{@ref BLE_GATTC_CHAR_DISC_MSC} * @endmscs * * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. * @param[in] p_handle_range A pointer to the range of handles of the Service to perform this procedure on. * * @retval ::NRF_SUCCESS Successfully started or resumed the Characteristic Discovery procedure. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_BUSY Client procedure already in progress. * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. */ SVCALL(SD_BLE_GATTC_CHARACTERISTICS_DISCOVER, uint32_t, sd_ble_gattc_characteristics_discover(uint16_t conn_handle, ble_gattc_handle_range_t const *p_handle_range)); /**@brief Initiate or continue a GATT Characteristic Descriptor Discovery procedure. * * @details This function initiates or resumes a Characteristic Descriptor discovery procedure. If the last Descriptor has not been reached, * this must be called again with an updated handle range to continue the discovery. * * @events * @event{@ref BLE_GATTC_EVT_DESC_DISC_RSP} * @endevents * * @mscs * @mmsc{@ref BLE_GATTC_DESC_DISC_MSC} * @endmscs * * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. * @param[in] p_handle_range A pointer to the range of handles of the Characteristic to perform this procedure on. * * @retval ::NRF_SUCCESS Successfully started or resumed the Descriptor Discovery procedure. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_BUSY Client procedure already in progress. * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. */ SVCALL(SD_BLE_GATTC_DESCRIPTORS_DISCOVER, uint32_t, sd_ble_gattc_descriptors_discover(uint16_t conn_handle, ble_gattc_handle_range_t const *p_handle_range)); /**@brief Initiate or continue a GATT Read using Characteristic UUID procedure. * * @details This function initiates or resumes a Read using Characteristic UUID procedure. If the last Characteristic has not been reached, * this must be called again with an updated handle range to continue the discovery. * * @events * @event{@ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP} * @endevents * * @mscs * @mmsc{@ref BLE_GATTC_READ_UUID_MSC} * @endmscs * * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. * @param[in] p_uuid Pointer to a Characteristic value UUID to read. * @param[in] p_handle_range A pointer to the range of handles to perform this procedure on. * * @retval ::NRF_SUCCESS Successfully started or resumed the Read using Characteristic UUID procedure. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_BUSY Client procedure already in progress. * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. */ SVCALL(SD_BLE_GATTC_CHAR_VALUE_BY_UUID_READ, uint32_t, sd_ble_gattc_char_value_by_uuid_read(uint16_t conn_handle, ble_uuid_t const *p_uuid, ble_gattc_handle_range_t const *p_handle_range)); /**@brief Initiate or continue a GATT Read (Long) Characteristic or Descriptor procedure. * * @details This function initiates or resumes a GATT Read (Long) Characteristic or Descriptor procedure. If the Characteristic or Descriptor * to be read is longer than ATT_MTU - 1, this function must be called multiple times with appropriate offset to read the * complete value. * * @events * @event{@ref BLE_GATTC_EVT_READ_RSP} * @endevents * * @mscs * @mmsc{@ref BLE_GATTC_VALUE_READ_MSC} * @endmscs * * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. * @param[in] handle The handle of the attribute to be read. * @param[in] offset Offset into the attribute value to be read. * * @retval ::NRF_SUCCESS Successfully started or resumed the Read (Long) procedure. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. * @retval ::NRF_ERROR_BUSY Client procedure already in progress. * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. */ SVCALL(SD_BLE_GATTC_READ, uint32_t, sd_ble_gattc_read(uint16_t conn_handle, uint16_t handle, uint16_t offset)); /**@brief Initiate a GATT Read Multiple Characteristic Values procedure. * * @details This function initiates a GATT Read Multiple Characteristic Values procedure. * * @events * @event{@ref BLE_GATTC_EVT_CHAR_VALS_READ_RSP} * @endevents * * @mscs * @mmsc{@ref BLE_GATTC_READ_MULT_MSC} * @endmscs * * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. * @param[in] p_handles A pointer to the handle(s) of the attribute(s) to be read. * @param[in] handle_count The number of handles in p_handles. * * @retval ::NRF_SUCCESS Successfully started the Read Multiple Characteristic Values procedure. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_BUSY Client procedure already in progress. * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. */ SVCALL(SD_BLE_GATTC_CHAR_VALUES_READ, uint32_t, sd_ble_gattc_char_values_read(uint16_t conn_handle, uint16_t const *p_handles, uint16_t handle_count)); /**@brief Perform a Write (Characteristic Value or Descriptor, with or without response, signed or not, long or reliable) procedure. * * @details This function can perform all write procedures described in GATT. * * @note Only one write with response procedure can be ongoing per connection at a time. * If the application tries to write with response while another write with response procedure is ongoing, * the function call will return @ref NRF_ERROR_BUSY. * A @ref BLE_GATTC_EVT_WRITE_RSP event will be issued as soon as the write response arrives from the peer. * * @note The minimum guaranteed number of Write without Response that can be queued is configured by @ref ble_gattc_conn_cfg_t::write_cmd_tx_queue_size * When the queue is full, the function call will return @ref NRF_ERROR_RESOURCES. * A @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE event will be issued as soon as the transmission of the write without response is complete. * * @note The application can keep track of the available queue element count for writes without responses by following the procedure below: * - Store initial queue element count in a variable. * - Decrement the variable, which stores the currently available queue element count, by one when a call to this function returns @ref NRF_SUCCESS. * - Increment the variable, which stores the current available queue element count, by the count variable in @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE event. * * @events * @event{@ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE, Write without response transmission complete.} * @event{@ref BLE_GATTC_EVT_WRITE_RSP, Write response received from the peer.} * @endevents * * @mscs * @mmsc{@ref BLE_GATTC_VALUE_WRITE_WITHOUT_RESP_MSC} * @mmsc{@ref BLE_GATTC_VALUE_WRITE_MSC} * @mmsc{@ref BLE_GATTC_VALUE_LONG_WRITE_MSC} * @mmsc{@ref BLE_GATTC_VALUE_RELIABLE_WRITE_MSC} * @endmscs * * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. * @param[in] p_write_params A pointer to a write parameters structure. * * @retval ::NRF_SUCCESS Successfully started the Write procedure. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. * @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied. * @retval ::NRF_ERROR_BUSY For write with response, procedure already in progress. Wait for a @ref BLE_GATTC_EVT_WRITE_RSP event and retry. * @retval ::NRF_ERROR_RESOURCES Too many writes without responses queued. * Wait for a @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE event and retry. * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. */ SVCALL(SD_BLE_GATTC_WRITE, uint32_t, sd_ble_gattc_write(uint16_t conn_handle, ble_gattc_write_params_t const *p_write_params)); /**@brief Send a Handle Value Confirmation to the GATT Server. * * @mscs * @mmsc{@ref BLE_GATTC_HVI_MSC} * @endmscs * * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. * @param[in] handle The handle of the attribute in the indication. * * @retval ::NRF_SUCCESS Successfully queued the Handle Value Confirmation for transmission. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State or no Indication pending to be confirmed. * @retval ::BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle. * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. */ SVCALL(SD_BLE_GATTC_HV_CONFIRM, uint32_t, sd_ble_gattc_hv_confirm(uint16_t conn_handle, uint16_t handle)); /**@brief Discovers information about a range of attributes on a GATT server. * * @events * @event{@ref BLE_GATTC_EVT_ATTR_INFO_DISC_RSP, Generated when information about a range of attributes has been received.} * @endevents * * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. * @param[in] p_handle_range The range of handles to request information about. * * @retval ::NRF_SUCCESS Successfully started an attribute information discovery procedure. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle. * @retval ::NRF_ERROR_INVALID_STATE Invalid connection state * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_BUSY Client procedure already in progress. * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. */ SVCALL(SD_BLE_GATTC_ATTR_INFO_DISCOVER, uint32_t, sd_ble_gattc_attr_info_discover(uint16_t conn_handle, ble_gattc_handle_range_t const * p_handle_range)); /**@brief Start an ATT_MTU exchange by sending an Exchange MTU Request to the server. * * @details The SoftDevice sets ATT_MTU to the minimum of: * - The Client RX MTU value, and * - The Server RX MTU value from @ref BLE_GATTC_EVT_EXCHANGE_MTU_RSP. * * However, the SoftDevice never sets ATT_MTU lower than @ref BLE_GATT_ATT_MTU_DEFAULT. * * @events * @event{@ref BLE_GATTC_EVT_EXCHANGE_MTU_RSP} * @endevents * * @mscs * @mmsc{@ref BLE_GATTC_MTU_EXCHANGE} * @endmscs * * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. * @param[in] client_rx_mtu Client RX MTU size. * - The minimum value is @ref BLE_GATT_ATT_MTU_DEFAULT. * - The maximum value is @ref ble_gatt_conn_cfg_t::att_mtu in the connection configuration used for this connection. * - The value must be equal to Server RX MTU size given in @ref sd_ble_gatts_exchange_mtu_reply * if an ATT_MTU exchange has already been performed in the other direction. * * @retval ::NRF_SUCCESS Successfully sent request to the server. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle. * @retval ::NRF_ERROR_INVALID_STATE Invalid connection state or an ATT_MTU exchange was already requested once. * @retval ::NRF_ERROR_INVALID_PARAM Invalid Client RX MTU size supplied. * @retval ::NRF_ERROR_BUSY Client procedure already in progress. * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. */ SVCALL(SD_BLE_GATTC_EXCHANGE_MTU_REQUEST, uint32_t, sd_ble_gattc_exchange_mtu_request(uint16_t conn_handle, uint16_t client_rx_mtu)); /**@brief Iterate through Handle-Value(s) list in @ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP event. * * @param[in] p_gattc_evt Pointer to event buffer containing @ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP event. * @note If the buffer contains different event, behavior is undefined. * @param[in,out] p_iter Iterator, points to @ref ble_gattc_handle_value_t structure that will be filled in with * the next Handle-Value pair in each iteration. If the function returns other than * @ref NRF_SUCCESS, it will not be changed. * - To start iteration, initialize the structure to zero. * - To continue, pass the value from previous iteration. * * \code * ble_gattc_handle_value_t iter; * memset(&iter, 0, sizeof(ble_gattc_handle_value_t)); * while (sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter(&ble_evt.evt.gattc_evt, &iter) == NRF_SUCCESS) * { * app_handle = iter.handle; * memcpy(app_value, iter.p_value, ble_evt.evt.gattc_evt.params.char_val_by_uuid_read_rsp.value_len); * } * \endcode * * @retval ::NRF_SUCCESS Successfully retrieved the next Handle-Value pair. * @retval ::NRF_ERROR_NOT_FOUND No more Handle-Value pairs available in the list. */ #ifndef SUPPRESS_INLINE_IMPLEMENTATION __STATIC_INLINE uint32_t sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter(ble_gattc_evt_t *p_gattc_evt, ble_gattc_handle_value_t *p_iter) { uint32_t value_len = p_gattc_evt->params.char_val_by_uuid_read_rsp.value_len; uint8_t *p_first = p_gattc_evt->params.char_val_by_uuid_read_rsp.handle_value; uint8_t *p_next = p_iter->p_value ? p_iter->p_value + value_len : p_first; if ((p_next - p_first) / (sizeof(uint16_t) + value_len) < p_gattc_evt->params.char_val_by_uuid_read_rsp.count) { p_iter->handle = (uint16_t)p_next[1] << 8 | p_next[0]; p_iter->p_value = p_next + sizeof(uint16_t); return NRF_SUCCESS; } else { return NRF_ERROR_NOT_FOUND; } } #else uint32_t sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter(ble_gattc_evt_t *p_gattc_evt, ble_gattc_handle_value_t *p_iter); #endif /* SUPPRESS_INLINE_IMPLEMENTATION */ /** @} */ #ifdef __cplusplus } #endif #endif /* BLE_GATTC_H__ */ /** @} */