/* * Copyright (c) 2011 - 2020, Nordic Semiconductor ASA * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /** @addtogroup BLE_L2CAP Logical Link Control and Adaptation Protocol (L2CAP) @{ @brief Definitions and prototypes for the L2CAP interface. */ #ifndef BLE_L2CAP_H__ #define BLE_L2CAP_H__ #include #include "nrf_svc.h" #include "nrf_error.h" #include "ble_ranges.h" #include "ble_types.h" #include "ble_err.h" #ifdef __cplusplus extern "C" { #endif /**@addtogroup BLE_L2CAP_TERMINOLOGY Terminology * @{ * @details * * L2CAP SDU * - A data unit that the application can send/receive to/from a peer. * * L2CAP PDU * - A data unit that is exchanged between local and remote L2CAP entities. * It consists of L2CAP protocol control information and payload fields. * The payload field can contain an L2CAP SDU or a part of an L2CAP SDU. * * L2CAP MTU * - The maximum length of an L2CAP SDU. * * L2CAP MPS * - The maximum length of an L2CAP PDU payload field. * * Credits * - A value indicating the number of L2CAP PDUs that the receiver of the credit can send to the peer. * @} */ /**@addtogroup BLE_L2CAP_ENUMERATIONS Enumerations * @{ */ /**@brief L2CAP API SVC numbers. */ enum BLE_L2CAP_SVCS { SD_BLE_L2CAP_CH_SETUP = BLE_L2CAP_SVC_BASE + 0, /**< Set up an L2CAP channel. */ SD_BLE_L2CAP_CH_RELEASE = BLE_L2CAP_SVC_BASE + 1, /**< Release an L2CAP channel. */ SD_BLE_L2CAP_CH_RX = BLE_L2CAP_SVC_BASE + 2, /**< Receive an SDU on an L2CAP channel. */ SD_BLE_L2CAP_CH_TX = BLE_L2CAP_SVC_BASE + 3, /**< Transmit an SDU on an L2CAP channel. */ SD_BLE_L2CAP_CH_FLOW_CONTROL = BLE_L2CAP_SVC_BASE + 4, /**< Advanced SDU reception flow control. */ }; /**@brief L2CAP Event IDs. */ enum BLE_L2CAP_EVTS { BLE_L2CAP_EVT_CH_SETUP_REQUEST = BLE_L2CAP_EVT_BASE + 0, /**< L2CAP Channel Setup Request event. \n Reply with @ref sd_ble_l2cap_ch_setup. \n See @ref ble_l2cap_evt_ch_setup_request_t. */ BLE_L2CAP_EVT_CH_SETUP_REFUSED = BLE_L2CAP_EVT_BASE + 1, /**< L2CAP Channel Setup Refused event. \n See @ref ble_l2cap_evt_ch_setup_refused_t. */ BLE_L2CAP_EVT_CH_SETUP = BLE_L2CAP_EVT_BASE + 2, /**< L2CAP Channel Setup Completed event. \n See @ref ble_l2cap_evt_ch_setup_t. */ BLE_L2CAP_EVT_CH_RELEASED = BLE_L2CAP_EVT_BASE + 3, /**< L2CAP Channel Released event. \n No additional event structure applies. */ BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED = BLE_L2CAP_EVT_BASE + 4, /**< L2CAP Channel SDU data buffer released event. \n See @ref ble_l2cap_evt_ch_sdu_buf_released_t. */ BLE_L2CAP_EVT_CH_CREDIT = BLE_L2CAP_EVT_BASE + 5, /**< L2CAP Channel Credit received. \n See @ref ble_l2cap_evt_ch_credit_t. */ BLE_L2CAP_EVT_CH_RX = BLE_L2CAP_EVT_BASE + 6, /**< L2CAP Channel SDU received. \n See @ref ble_l2cap_evt_ch_rx_t. */ BLE_L2CAP_EVT_CH_TX = BLE_L2CAP_EVT_BASE + 7, /**< L2CAP Channel SDU transmitted. \n See @ref ble_l2cap_evt_ch_tx_t. */ }; /** @} */ /**@addtogroup BLE_L2CAP_DEFINES Defines * @{ */ /**@brief Maximum number of L2CAP channels per connection. */ #define BLE_L2CAP_CH_COUNT_MAX (64) /**@brief Minimum L2CAP MTU, in bytes. */ #define BLE_L2CAP_MTU_MIN (23) /**@brief Minimum L2CAP MPS, in bytes. */ #define BLE_L2CAP_MPS_MIN (23) /**@brief Invalid CID. */ #define BLE_L2CAP_CID_INVALID (0x0000) /**@brief Default number of credits for @ref sd_ble_l2cap_ch_flow_control. */ #define BLE_L2CAP_CREDITS_DEFAULT (1) /**@defgroup BLE_L2CAP_CH_SETUP_REFUSED_SRCS L2CAP channel setup refused sources * @{ */ #define BLE_L2CAP_CH_SETUP_REFUSED_SRC_LOCAL (0x01) /**< Local. */ #define BLE_L2CAP_CH_SETUP_REFUSED_SRC_REMOTE (0x02) /**< Remote. */ /** @} */ /** @defgroup BLE_L2CAP_CH_STATUS_CODES L2CAP channel status codes * @{ */ #define BLE_L2CAP_CH_STATUS_CODE_SUCCESS (0x0000) /**< Success. */ #define BLE_L2CAP_CH_STATUS_CODE_LE_PSM_NOT_SUPPORTED (0x0002) /**< LE_PSM not supported. */ #define BLE_L2CAP_CH_STATUS_CODE_NO_RESOURCES (0x0004) /**< No resources available. */ #define BLE_L2CAP_CH_STATUS_CODE_INSUFF_AUTHENTICATION (0x0005) /**< Insufficient authentication. */ #define BLE_L2CAP_CH_STATUS_CODE_INSUFF_AUTHORIZATION (0x0006) /**< Insufficient authorization. */ #define BLE_L2CAP_CH_STATUS_CODE_INSUFF_ENC_KEY_SIZE (0x0007) /**< Insufficient encryption key size. */ #define BLE_L2CAP_CH_STATUS_CODE_INSUFF_ENC (0x0008) /**< Insufficient encryption. */ #define BLE_L2CAP_CH_STATUS_CODE_INVALID_SCID (0x0009) /**< Invalid Source CID. */ #define BLE_L2CAP_CH_STATUS_CODE_SCID_ALLOCATED (0x000A) /**< Source CID already allocated. */ #define BLE_L2CAP_CH_STATUS_CODE_UNACCEPTABLE_PARAMS (0x000B) /**< Unacceptable parameters. */ #define BLE_L2CAP_CH_STATUS_CODE_NOT_UNDERSTOOD (0x8000) /**< Command Reject received instead of LE Credit Based Connection Response. */ #define BLE_L2CAP_CH_STATUS_CODE_TIMEOUT (0xC000) /**< Operation timed out. */ /** @} */ /** @} */ /**@addtogroup BLE_L2CAP_STRUCTURES Structures * @{ */ /** * @brief BLE L2CAP connection configuration parameters, set with @ref sd_ble_cfg_set. * * @note These parameters are set per connection, so all L2CAP channels created on this connection * will have the same parameters. * * @retval ::NRF_ERROR_INVALID_PARAM One or more of the following is true: * - rx_mps is smaller than @ref BLE_L2CAP_MPS_MIN. * - tx_mps is smaller than @ref BLE_L2CAP_MPS_MIN. * - ch_count is greater than @ref BLE_L2CAP_CH_COUNT_MAX. * @retval ::NRF_ERROR_NO_MEM rx_mps or tx_mps is set too high. */ typedef struct { uint16_t rx_mps; /**< The maximum L2CAP PDU payload size, in bytes, that L2CAP shall be able to receive on L2CAP channels on connections with this configuration. The minimum value is @ref BLE_L2CAP_MPS_MIN. */ uint16_t tx_mps; /**< The maximum L2CAP PDU payload size, in bytes, that L2CAP shall be able to transmit on L2CAP channels on connections with this configuration. The minimum value is @ref BLE_L2CAP_MPS_MIN. */ uint8_t rx_queue_size; /**< Number of SDU data buffers that can be queued for reception per L2CAP channel. The minimum value is one. */ uint8_t tx_queue_size; /**< Number of SDU data buffers that can be queued for transmission per L2CAP channel. The minimum value is one. */ uint8_t ch_count; /**< Number of L2CAP channels the application can create per connection with this configuration. The default value is zero, the maximum value is @ref BLE_L2CAP_CH_COUNT_MAX. @note if this parameter is set to zero, all other parameters in @ref ble_l2cap_conn_cfg_t are ignored. */ } ble_l2cap_conn_cfg_t; /**@brief L2CAP channel RX parameters. */ typedef struct { uint16_t rx_mtu; /**< The maximum L2CAP SDU size, in bytes, that L2CAP shall be able to receive on this L2CAP channel. - Must be equal to or greater than @ref BLE_L2CAP_MTU_MIN. */ uint16_t rx_mps; /**< The maximum L2CAP PDU payload size, in bytes, that L2CAP shall be able to receive on this L2CAP channel. - Must be equal to or greater than @ref BLE_L2CAP_MPS_MIN. - Must be equal to or less than @ref ble_l2cap_conn_cfg_t::rx_mps. */ ble_data_t sdu_buf; /**< SDU data buffer for reception. - If @ref ble_data_t::p_data is non-NULL, initial credits are issued to the peer. - If @ref ble_data_t::p_data is NULL, no initial credits are issued to the peer. */ } ble_l2cap_ch_rx_params_t; /**@brief L2CAP channel setup parameters. */ typedef struct { ble_l2cap_ch_rx_params_t rx_params; /**< L2CAP channel RX parameters. */ uint16_t le_psm; /**< LE Protocol/Service Multiplexer. Used when requesting setup of an L2CAP channel, ignored otherwise. */ uint16_t status; /**< Status code, see @ref BLE_L2CAP_CH_STATUS_CODES. Used when replying to a setup request of an L2CAP channel, ignored otherwise. */ } ble_l2cap_ch_setup_params_t; /**@brief L2CAP channel TX parameters. */ typedef struct { uint16_t tx_mtu; /**< The maximum L2CAP SDU size, in bytes, that L2CAP is able to transmit on this L2CAP channel. */ uint16_t peer_mps; /**< The maximum L2CAP PDU payload size, in bytes, that the peer is able to receive on this L2CAP channel. */ uint16_t tx_mps; /**< The maximum L2CAP PDU payload size, in bytes, that L2CAP is able to transmit on this L2CAP channel. This is effective tx_mps, selected by the SoftDevice as MIN( @ref ble_l2cap_ch_tx_params_t::peer_mps, @ref ble_l2cap_conn_cfg_t::tx_mps ) */ uint16_t credits; /**< Initial credits given by the peer. */ } ble_l2cap_ch_tx_params_t; /**@brief L2CAP Channel Setup Request event. */ typedef struct { ble_l2cap_ch_tx_params_t tx_params; /**< L2CAP channel TX parameters. */ uint16_t le_psm; /**< LE Protocol/Service Multiplexer. */ } ble_l2cap_evt_ch_setup_request_t; /**@brief L2CAP Channel Setup Refused event. */ typedef struct { uint8_t source; /**< Source, see @ref BLE_L2CAP_CH_SETUP_REFUSED_SRCS */ uint16_t status; /**< Status code, see @ref BLE_L2CAP_CH_STATUS_CODES */ } ble_l2cap_evt_ch_setup_refused_t; /**@brief L2CAP Channel Setup Completed event. */ typedef struct { ble_l2cap_ch_tx_params_t tx_params; /**< L2CAP channel TX parameters. */ } ble_l2cap_evt_ch_setup_t; /**@brief L2CAP Channel SDU Data Buffer Released event. */ typedef struct { ble_data_t sdu_buf; /**< Returned reception or transmission SDU data buffer. The SoftDevice returns SDU data buffers supplied by the application, which have not yet been returned previously via a @ref BLE_L2CAP_EVT_CH_RX or @ref BLE_L2CAP_EVT_CH_TX event. */ } ble_l2cap_evt_ch_sdu_buf_released_t; /**@brief L2CAP Channel Credit received event. */ typedef struct { uint16_t credits; /**< Additional credits given by the peer. */ } ble_l2cap_evt_ch_credit_t; /**@brief L2CAP Channel received SDU event. */ typedef struct { uint16_t sdu_len; /**< Total SDU length, in bytes. */ ble_data_t sdu_buf; /**< SDU data buffer. @note If there is not enough space in the buffer (sdu_buf.len < sdu_len) then the rest of the SDU will be silently discarded by the SoftDevice. */ } ble_l2cap_evt_ch_rx_t; /**@brief L2CAP Channel transmitted SDU event. */ typedef struct { ble_data_t sdu_buf; /**< SDU data buffer. */ } ble_l2cap_evt_ch_tx_t; /**@brief L2CAP event structure. */ typedef struct { uint16_t conn_handle; /**< Connection Handle on which the event occured. */ uint16_t local_cid; /**< Local Channel ID of the L2CAP channel, or @ref BLE_L2CAP_CID_INVALID if not present. */ union { ble_l2cap_evt_ch_setup_request_t ch_setup_request; /**< L2CAP Channel Setup Request Event Parameters. */ ble_l2cap_evt_ch_setup_refused_t ch_setup_refused; /**< L2CAP Channel Setup Refused Event Parameters. */ ble_l2cap_evt_ch_setup_t ch_setup; /**< L2CAP Channel Setup Completed Event Parameters. */ ble_l2cap_evt_ch_sdu_buf_released_t ch_sdu_buf_released;/**< L2CAP Channel SDU Data Buffer Released Event Parameters. */ ble_l2cap_evt_ch_credit_t credit; /**< L2CAP Channel Credit Received Event Parameters. */ ble_l2cap_evt_ch_rx_t rx; /**< L2CAP Channel SDU Received Event Parameters. */ ble_l2cap_evt_ch_tx_t tx; /**< L2CAP Channel SDU Transmitted Event Parameters. */ } params; /**< Event Parameters. */ } ble_l2cap_evt_t; /** @} */ /**@addtogroup BLE_L2CAP_FUNCTIONS Functions * @{ */ /**@brief Set up an L2CAP channel. * * @details This function is used to: * - Request setup of an L2CAP channel: sends an LE Credit Based Connection Request packet to a peer. * - Reply to a setup request of an L2CAP channel (if called in response to a * @ref BLE_L2CAP_EVT_CH_SETUP_REQUEST event): sends an LE Credit Based Connection * Response packet to a peer. * * @note A call to this function will require the application to keep the SDU data buffer alive * until the SDU data buffer is returned in @ref BLE_L2CAP_EVT_CH_RX or * @ref BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED event. * * @events * @event{@ref BLE_L2CAP_EVT_CH_SETUP, Setup successful.} * @event{@ref BLE_L2CAP_EVT_CH_SETUP_REFUSED, Setup failed.} * @endevents * * @mscs * @mmsc{@ref BLE_L2CAP_CH_SETUP_MSC} * @endmscs * * @param[in] conn_handle Connection Handle. * @param[in,out] p_local_cid Pointer to a uint16_t containing Local Channel ID of the L2CAP channel: * - As input: @ref BLE_L2CAP_CID_INVALID when requesting setup of an L2CAP * channel or local_cid provided in the @ref BLE_L2CAP_EVT_CH_SETUP_REQUEST * event when replying to a setup request of an L2CAP channel. * - As output: local_cid for this channel. * @param[in] p_params L2CAP channel parameters. * * @retval ::NRF_SUCCESS Successfully queued request or response for transmission. * @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. * @retval ::NRF_ERROR_INVALID_LENGTH Supplied higher rx_mps than has been configured on this link. * @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (L2CAP channel already set up). * @retval ::NRF_ERROR_NOT_FOUND CID not found. * @retval ::NRF_ERROR_RESOURCES The limit has been reached for available L2CAP channels, * see @ref ble_l2cap_conn_cfg_t::ch_count. */ SVCALL(SD_BLE_L2CAP_CH_SETUP, uint32_t, sd_ble_l2cap_ch_setup(uint16_t conn_handle, uint16_t *p_local_cid, ble_l2cap_ch_setup_params_t const *p_params)); /**@brief Release an L2CAP channel. * * @details This sends a Disconnection Request packet to a peer. * * @events * @event{@ref BLE_L2CAP_EVT_CH_RELEASED, Release complete.} * @endevents * * @mscs * @mmsc{@ref BLE_L2CAP_CH_RELEASE_MSC} * @endmscs * * @param[in] conn_handle Connection Handle. * @param[in] local_cid Local Channel ID of the L2CAP channel. * * @retval ::NRF_SUCCESS Successfully queued request for transmission. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. * @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is * in progress for the L2CAP channel). * @retval ::NRF_ERROR_NOT_FOUND CID not found. */ SVCALL(SD_BLE_L2CAP_CH_RELEASE, uint32_t, sd_ble_l2cap_ch_release(uint16_t conn_handle, uint16_t local_cid)); /**@brief Receive an SDU on an L2CAP channel. * * @details This may issue additional credits to the peer using an LE Flow Control Credit packet. * * @note A call to this function will require the application to keep the memory pointed by * @ref ble_data_t::p_data alive until the SDU data buffer is returned in @ref BLE_L2CAP_EVT_CH_RX * or @ref BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED event. * * @note The SoftDevice can queue up to @ref ble_l2cap_conn_cfg_t::rx_queue_size SDU data buffers * for reception per L2CAP channel. * * @events * @event{@ref BLE_L2CAP_EVT_CH_RX, The SDU is received.} * @endevents * * @mscs * @mmsc{@ref BLE_L2CAP_CH_RX_MSC} * @endmscs * * @param[in] conn_handle Connection Handle. * @param[in] local_cid Local Channel ID of the L2CAP channel. * @param[in] p_sdu_buf Pointer to the SDU data buffer. * * @retval ::NRF_SUCCESS Buffer accepted. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. * @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is * in progress for an L2CAP channel). * @retval ::NRF_ERROR_NOT_FOUND CID not found. * @retval ::NRF_ERROR_RESOURCES Too many SDU data buffers supplied. Wait for a * @ref BLE_L2CAP_EVT_CH_RX event and retry. */ SVCALL(SD_BLE_L2CAP_CH_RX, uint32_t, sd_ble_l2cap_ch_rx(uint16_t conn_handle, uint16_t local_cid, ble_data_t const *p_sdu_buf)); /**@brief Transmit an SDU on an L2CAP channel. * * @note A call to this function will require the application to keep the memory pointed by * @ref ble_data_t::p_data alive until the SDU data buffer is returned in @ref BLE_L2CAP_EVT_CH_TX * or @ref BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED event. * * @note The SoftDevice can queue up to @ref ble_l2cap_conn_cfg_t::tx_queue_size SDUs for * transmission per L2CAP channel. * * @note The application can keep track of the available credits for transmission by following * the procedure below: * - Store initial credits given by the peer in a variable. * (Initial credits are provided in a @ref BLE_L2CAP_EVT_CH_SETUP event.) * - Decrement the variable, which stores the currently available credits, by * ceiling((@ref ble_data_t::len + 2) / tx_mps) when a call to this function returns * @ref NRF_SUCCESS. (tx_mps is provided in a @ref BLE_L2CAP_EVT_CH_SETUP event.) * - Increment the variable, which stores the currently available credits, by additional * credits given by the peer in a @ref BLE_L2CAP_EVT_CH_CREDIT event. * * @events * @event{@ref BLE_L2CAP_EVT_CH_TX, The SDU is transmitted.} * @endevents * * @mscs * @mmsc{@ref BLE_L2CAP_CH_TX_MSC} * @endmscs * * @param[in] conn_handle Connection Handle. * @param[in] local_cid Local Channel ID of the L2CAP channel. * @param[in] p_sdu_buf Pointer to the SDU data buffer. * * @retval ::NRF_SUCCESS Successfully queued L2CAP SDU for transmission. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. * @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is * in progress for the L2CAP channel). * @retval ::NRF_ERROR_NOT_FOUND CID not found. * @retval ::NRF_ERROR_DATA_SIZE Invalid SDU length supplied, must not be more than * @ref ble_l2cap_ch_tx_params_t::tx_mtu provided in * @ref BLE_L2CAP_EVT_CH_SETUP event. * @retval ::NRF_ERROR_RESOURCES Too many SDUs queued for transmission. Wait for a * @ref BLE_L2CAP_EVT_CH_TX event and retry. */ SVCALL(SD_BLE_L2CAP_CH_TX, uint32_t, sd_ble_l2cap_ch_tx(uint16_t conn_handle, uint16_t local_cid, ble_data_t const *p_sdu_buf)); /**@brief Advanced SDU reception flow control. * * @details Adjust the way the SoftDevice issues credits to the peer. * This may issue additional credits to the peer using an LE Flow Control Credit packet. * * @mscs * @mmsc{@ref BLE_L2CAP_CH_FLOW_CONTROL_MSC} * @endmscs * * @param[in] conn_handle Connection Handle. * @param[in] local_cid Local Channel ID of the L2CAP channel or @ref BLE_L2CAP_CID_INVALID to set * the value that will be used for newly created channels. * @param[in] credits Number of credits that the SoftDevice will make sure the peer has every * time it starts using a new reception buffer. * - @ref BLE_L2CAP_CREDITS_DEFAULT is the default value the SoftDevice will * use if this function is not called. * - If set to zero, the SoftDevice will stop issuing credits for new reception * buffers the application provides or has provided. SDU reception that is * currently ongoing will be allowed to complete. * @param[out] p_credits NULL or pointer to a uint16_t. If a valid pointer is provided, it will be * written by the SoftDevice with the number of credits that is or will be * available to the peer. If the value written by the SoftDevice is 0 when * credits parameter was set to 0, the peer will not be able to send more * data until more credits are provided by calling this function again with * credits > 0. This parameter is ignored when local_cid is set to * @ref BLE_L2CAP_CID_INVALID. * * @note Application should take care when setting number of credits higher than default value. In * this case the application must make sure that the SoftDevice always has reception buffers * available (see @ref sd_ble_l2cap_ch_rx) for that channel. If the SoftDevice does not have * such buffers available, packets may be NACKed on the Link Layer and all Bluetooth traffic * on the connection handle may be stalled until the SoftDevice again has an available * reception buffer. This applies even if the application has used this call to set the * credits back to default, or zero. * * @retval ::NRF_SUCCESS Flow control parameters accepted. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. * @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is * in progress for an L2CAP channel). * @retval ::NRF_ERROR_NOT_FOUND CID not found. */ SVCALL(SD_BLE_L2CAP_CH_FLOW_CONTROL, uint32_t, sd_ble_l2cap_ch_flow_control(uint16_t conn_handle, uint16_t local_cid, uint16_t credits, uint16_t *p_credits)); /** @} */ #ifdef __cplusplus } #endif #endif // BLE_L2CAP_H__ /** @} */