/**
 * Copyright (c) 2016 - 2019, Nordic Semiconductor ASA
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice, this
 *    list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form, except as embedded into a Nordic
 *    Semiconductor ASA integrated circuit in a product or a software update for
 *    such product, must reproduce the above copyright notice, this list of
 *    conditions and the following disclaimer in the documentation and/or other
 *    materials provided with the distribution.
 *
 * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
 *    contributors may be used to endorse or promote products derived from this
 *    software without specific prior written permission.
 *
 * 4. This software, with or without modification, must only be used with a
 *    Nordic Semiconductor ASA integrated circuit.
 *
 * 5. Any software provided in binary form under this license must not be reverse
 *    engineered, decompiled, modified and/or disassembled.
 *
 * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */
#ifndef SDK_VALIDATION_H
#define SDK_VALIDATION_H

#include "nrf_peripherals.h"
#include "sdk_config.h"

#ifdef __cplusplus
extern "C" {
#endif

// Validate peripheral availibility

#if ((defined(SAADC_ENABLED)) && (SAADC_ENABLED > 0) && (!defined(SAADC_PRESENT)))
#error "SAADC not present in selected MCU."
#endif

#if ((defined(ADC_ENABLED)) && (ADC_ENABLED > 0) && (!defined(ADC_PRESENT)))
#error "SAADC not present in selected MCU."
#endif

#if ((defined(I2S_ENABLED)) && (I2S_ENABLED > 0) && (!defined(I2S_PRESENT)))
#error "I2S not present in selected MCU."
#endif

#if ((defined(COMP_ENABLED)) && (COMP_ENABLED > 0) && (!defined(COMP_PRESENT)))
#error "COMP not present in selected MCU."
#endif

#if ((defined(LPCOMP_ENABLED)) && (LPCOMP_ENABLED > 0) && (!defined(LPCOMP_PRESENT)))
#error "LPCOMP not present in selected MCU."
#endif

#if ((defined(SPIS0_ENABLED)) && (SPIS0_ENABLED > 0) && (!defined(SPIS_PRESENT)))
#error "SPIS0 instance not present in selected MCU."
#endif

#if ((defined(EGU_ENABLED)) && (EGU_ENABLED > 0) && (!defined(EGU_PRESENT)))
#error "EGU instance not present in selected MCU."
#endif

#if ((defined(NFC_HAL_ENABLED)) && (NFC_HAL_ENABLED > 0) && (!defined(NFCT_PRESENT)))
#error "NFC TAG not present in selected MCU."
#endif

// Validate count of instances

#if ((defined(RTC2_ENABLED)) && (RTC2_ENABLED > 0) && (RTC_COUNT < 2))
#error "RTC2 not present in selected MCU."
#endif

#if ((defined(TWIS0_ENABLED) || defined(TWIS1_ENABLED)) &&\
    ((TWIS0_ENABLED + TWIS1_ENABLED) > 0) &&\
    (!defined(TWIS_PRESENT)))
#error "TWIS not present in selected MCU."
#endif

#if ((defined(SPIS2_ENABLED)) && (SPIS2_ENABLED > 0) && (SPIS_COUNT < 2))
#error "SPI2/SPIS2 instance not present in selected MCU."
#endif

#if ((defined(TIMER3_ENABLED) || defined(TIMER4_ENABLED)) &&\
    ((TIMER3_ENABLED + TIMER4_ENABLED ) > 0) &&\
    (TIMER_COUNT < 5))
#error "TIMER3 and TIMER4 not present in selected MCU."
#endif

// Validate peripheral sharing feature
#if !NRFX_CHECK(NRFX_PRS_ENABLED)

#if ((defined(TWIM0_ENABLED) && defined(TWIS0_ENABLED)) &&\
    ((TWIM0_ENABLED + TWIS0_ENABLED) > 1))
#error "Peripherals overlap. TWIM0, TWIS0 - only one of these can be enabled."
#endif

#if ((defined(TWIM0_ENABLED) && defined(SPIM0_ENABLED)) &&\
    ((TWIM0_ENABLED + SPIM0_ENABLED) > 1))
#error "Peripherals overlap. TWIM0, SPIM0 - only one of these can be enabled."
#endif

#if ((defined(TWIM0_ENABLED) && defined(SPIS0_ENABLED)) &&\
    ((TWIM0_ENABLED + SPIS0_ENABLED) > 1))
#error "Peripherals overlap. TWIM0, SPIS0 - only one of these can be enabled."
#endif

#if ((defined(TWIM0_ENABLED) && defined(SPI0_ENABLED)) &&\
    ((TWIM0_ENABLED + SPI0_ENABLED) > 1))
#error "Peripherals overlap. TWIM0, SPI0 - only one of these can be enabled."
#endif

#if ((defined(TWIM0_ENABLED) && defined(TWI0_ENABLED)) &&\
    ((TWIM0_ENABLED + TWI0_ENABLED) > 1))
#error "Peripherals overlap. TWIM0, TWI0 - only one of these can be enabled."
#endif

#if ((defined(TWIS0_ENABLED) && defined(SPIM0_ENABLED)) &&\
    ((TWIS0_ENABLED + SPIM0_ENABLED) > 1))
#error "Peripherals overlap. TWIS0, SPIM0 - only one of these can be enabled."
#endif

#if ((defined(TWIS0_ENABLED) && defined(SPIS0_ENABLED)) &&\
    ((TWIS0_ENABLED + SPIS0_ENABLED) > 1))
#error "Peripherals overlap. TWIS0, SPIS0 - only one of these can be enabled."
#endif

#if ((defined(TWIS0_ENABLED) && defined(SPI0_ENABLED)) &&\
    ((TWIS0_ENABLED + SPI0_ENABLED) > 1))
#error "Peripherals overlap. TWIS0, SPI0 - only one of these can be enabled."
#endif

#if ((defined(TWIS0_ENABLED) && defined(TWI0_ENABLED)) &&\
    ((TWIS0_ENABLED + TWI0_ENABLED) > 1))
#error "Peripherals overlap. TWIS0, TWI0 - only one of these can be enabled."
#endif

#if ((defined(SPIM0_ENABLED) && defined(SPIS0_ENABLED)) &&\
    ((SPIM0_ENABLED + SPIS0_ENABLED) > 1))
#error "Peripherals overlap. SPIM0, SPIS0 - only one of these can be enabled."
#endif

#if ((defined(SPIM0_ENABLED) && defined(SPI0_ENABLED)) &&\
    ((SPIM0_ENABLED + SPI0_ENABLED) > 1))
#error "Peripherals overlap. SPIM0, SPI0 - only one of these can be enabled."
#endif

#if ((defined(SPIM0_ENABLED) && defined(TWI0_ENABLED)) &&\
    ((SPIM0_ENABLED + TWI0_ENABLED) > 1))
#error "Peripherals overlap. SPIM0, TWI0 - only one of these can be enabled."
#endif

#if ((defined(SPIS0_ENABLED) && defined(SPI0_ENABLED)) &&\
    ((SPIS0_ENABLED + SPI0_ENABLED) > 1))
#error "Peripherals overlap. SPIS0, SPI0 - only one of these can be enabled."
#endif

#if ((defined(SPIS0_ENABLED) && defined(TWI0_ENABLED)) &&\
    ((SPIS0_ENABLED + TWI0_ENABLED) > 1))
#error "Peripherals overlap. SPIS0, TWI0 - only one of these can be enabled."
#endif

#if ((defined(SPI0_ENABLED) && defined(TWI0_ENABLED)) &&\
    ((SPI0_ENABLED + TWI0_ENABLED) > 1))
#error "Peripherals overlap. SPI0, TWI0 - only one of these can be enabled."
#endif

#if ((defined(TWIM1_ENABLED) && defined(TWIS1_ENABLED)) &&\
    ((TWIM1_ENABLED + TWIS1_ENABLED) > 1))
#error "Peripherals overlap. TWIM1, TWIS1 - only one of these can be enabled."
#endif

#if ((defined(TWIM1_ENABLED) && defined(SPIM1_ENABLED)) &&\
    ((TWIM1_ENABLED + SPIM1_ENABLED) > 1))
#error "Peripherals overlap. TWIM1, SPIM1 - only one of these can be enabled."
#endif

#if ((defined(TWIM1_ENABLED) && defined(SPIS1_ENABLED)) &&\
    ((TWIM1_ENABLED + SPIS1_ENABLED) > 1))
#error "Peripherals overlap. TWIM1, SPIS1 - only one of these can be enabled."
#endif

#if ((defined(TWIM1_ENABLED) && defined(SPI1_ENABLED)) &&\
    ((TWIM1_ENABLED + SPI1_ENABLED) > 1))
#error "Peripherals overlap. TWIM1, SPI1 - only one of these can be enabled."
#endif

#if ((defined(TWIM1_ENABLED) && defined(TWI1_ENABLED)) &&\
    ((TWIM1_ENABLED + TWI1_ENABLED) > 1))
#error "Peripherals overlap. TWIM1, TWI1 - only one of these can be enabled."
#endif

#if ((defined(TWIS1_ENABLED) && defined(SPIM1_ENABLED)) &&\
    ((TWIS1_ENABLED + SPIM1_ENABLED) > 1))
#error "Peripherals overlap. TWIS1, SPIM1 - only one of these can be enabled."
#endif

#if ((defined(TWIS1_ENABLED) && defined(SPIS1_ENABLED)) &&\
    ((TWIS1_ENABLED + SPIS1_ENABLED) > 1))
#error "Peripherals overlap. TWIS1, SPIS1 - only one of these can be enabled."
#endif

#if ((defined(TWIS1_ENABLED) && defined(SPI1_ENABLED)) &&\
    ((TWIS1_ENABLED + SPI1_ENABLED) > 1))
#error "Peripherals overlap. TWIS1, SPI1 - only one of these can be enabled."
#endif

#if ((defined(TWIS1_ENABLED) && defined(TWI1_ENABLED)) &&\
    ((TWIS1_ENABLED + TWI1_ENABLED) > 1))
#error "Peripherals overlap. TWIS1, TWI1 - only one of these can be enabled."
#endif

#if ((defined(SPIM1_ENABLED) && defined(SPIS1_ENABLED)) &&\
    ((SPIM1_ENABLED + SPIS1_ENABLED) > 1))
#error "Peripherals overlap. SPIM1, SPIS1 - only one of these can be enabled."
#endif

#if ((defined(SPIM1_ENABLED) && defined(SPI1_ENABLED)) &&\
    ((SPIM1_ENABLED + SPI1_ENABLED) > 1))
#error "Peripherals overlap. SPIM1, SPI1 - only one of these can be enabled."
#endif

#if ((defined(SPIM1_ENABLED) && defined(TWI1_ENABLED)) &&\
    ((SPIM1_ENABLED + TWI1_ENABLED) > 1))
#error "Peripherals overlap. SPIM1, TWI1 - only one of these can be enabled."
#endif

#if ((defined(SPIS1_ENABLED) && defined(SPI1_ENABLED)) &&\
    ((SPIS1_ENABLED + SPI1_ENABLED) > 1))
#error "Peripherals overlap. SPIS1, SPI1 - only one of these can be enabled."
#endif

#if ((defined(SPIS1_ENABLED) && defined(TWI1_ENABLED)) &&\
    ((SPIS1_ENABLED + TWI1_ENABLED) > 1))
#error "Peripherals overlap. SPIS1, TWI1 - only one of these can be enabled."
#endif

#if ((defined(SPI1_ENABLED) && defined(TWI1_ENABLED)) &&\
    ((SPI1_ENABLED + TWI1_ENABLED) > 1))
#error "Peripherals overlap. SPI1, TWI1 - only one of these can be enabled."
#endif

#if ((defined(SPI2_ENABLED) && defined(SPIS2_ENABLED)) &&\
    ((SPI2_ENABLED + SPIS2_ENABLED) > 1))
#error "Peripherals overlap. SPI2, SPIS2 - only one of these can be enabled."
#endif

#if ((defined(SPIM2_ENABLED) && defined(SPIS2_ENABLED)) &&\
    ((SPI2_ENABLED + SPIS2_ENABLED) > 1))
#error "Peripherals overlap. SPIM2, SPIS2 - only one of these can be enabled."
#endif

#if ((defined(SPIM2_ENABLED) && defined(SPI2_ENABLED)) &&\
    ((SPI2_ENABLED + SPIS2_ENABLED) > 1))
#error "Peripherals overlap. SPIM2, SPI2 - only one of these can be enabled."
#endif

#endif // !NRFX_CHECK(NRFX_PRS_ENABLED)

#ifdef NFCT_PRESENT

#if ((defined(NFC_HAL_ENABLED) && defined(NRF_CLOCK_ENABLED)) &&\
    ((NFC_HAL_ENABLED) && (!NRF_CLOCK_ENABLED)))
#error "NFC_HAL requires CLOCK to work. NFC_HAL can not be enabled without CLOCK."
#endif

#if ((defined(NFC_HAL_ENABLED) && defined(TIMER4_ENABLED)) &&\
    ((NFC_HAL_ENABLED + TIMER4_ENABLED) > 1))
#error "TIMER4 is used by NFC_HAL. NFC_HAL, TIMER4 - only one of these can be enabled."
#endif

#endif
// Complex driver validation
#ifdef LPCOMP_PRESENT

#if ((defined(COMP_ENABLED) && defined(LPCOMP_ENABLED)) && \
     (!NRFX_CHECK(NRFX_PRS_ENABLED)) && \
     ((COMP_ENABLED + LPCOMP_ENABLED) > 1))
#error "Peripherals overlap. COMP, LPCOMP - only one of these can be enabled."
#endif

#endif


#ifdef __cplusplus
}
#endif

#endif // SDK_VALIDATION_H