/** * Copyright (c) 2014 - 2019, Nordic Semiconductor ASA * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ #ifndef PCA10040_H #define PCA10040_H #ifdef __cplusplus extern "C" { #endif #include "nrf_gpio.h" // LEDs definitions for PCA10040 #define LEDS_NUMBER 4 #define LED_START 17 #define LED_1 17 #define LED_2 18 #define LED_3 19 #define LED_4 20 #define LED_STOP 20 #define LEDS_ACTIVE_STATE 0 #define LEDS_INV_MASK LEDS_MASK #define LEDS_LIST { LED_1, LED_2, LED_3, LED_4 } #define BSP_LED_0 LED_1 #define BSP_LED_1 LED_2 #define BSP_LED_2 LED_3 #define BSP_LED_3 LED_4 #define BUTTONS_NUMBER 4 #define BUTTON_START 13 #define BUTTON_1 13 #define BUTTON_2 14 #define BUTTON_3 15 #define BUTTON_4 16 #define BUTTON_STOP 16 #define BUTTON_PULL NRF_GPIO_PIN_PULLUP #define BUTTONS_ACTIVE_STATE 0 #define BUTTONS_LIST { BUTTON_1, BUTTON_2, BUTTON_3, BUTTON_4 } #define BSP_BUTTON_0 BUTTON_1 #define BSP_BUTTON_1 BUTTON_2 #define BSP_BUTTON_2 BUTTON_3 #define BSP_BUTTON_3 BUTTON_4 #define RX_PIN_NUMBER 6 #define TX_PIN_NUMBER 7 #define CTS_PIN_NUMBER 8 #define RTS_PIN_NUMBER 9 #define HWFC true #define SPIS_MISO_PIN 28 // SPI MISO signal. #define SPIS_CSN_PIN 12 // SPI CSN signal. #define SPIS_MOSI_PIN 25 // SPI MOSI signal. #define SPIS_SCK_PIN 29 // SPI SCK signal. #define SPIM0_SCK_PIN 29 // SPI clock GPIO pin number. #define SPIM0_MOSI_PIN 25 // SPI Master Out Slave In GPIO pin number. #define SPIM0_MISO_PIN 28 // SPI Master In Slave Out GPIO pin number. #define SPIM0_SS_PIN 12 // SPI Slave Select GPIO pin number. #define SPIM1_SCK_PIN 2 // SPI clock GPIO pin number. #define SPIM1_MOSI_PIN 3 // SPI Master Out Slave In GPIO pin number. #define SPIM1_MISO_PIN 4 // SPI Master In Slave Out GPIO pin number. #define SPIM1_SS_PIN 5 // SPI Slave Select GPIO pin number. #define SPIM2_SCK_PIN 12 // SPI clock GPIO pin number. #define SPIM2_MOSI_PIN 13 // SPI Master Out Slave In GPIO pin number. #define SPIM2_MISO_PIN 14 // SPI Master In Slave Out GPIO pin number. #define SPIM2_SS_PIN 15 // SPI Slave Select GPIO pin number. // serialization APPLICATION board - temp. setup for running serialized MEMU tests #define SER_APP_RX_PIN 23 // UART RX pin number. #define SER_APP_TX_PIN 24 // UART TX pin number. #define SER_APP_CTS_PIN 2 // UART Clear To Send pin number. #define SER_APP_RTS_PIN 25 // UART Request To Send pin number. #define SER_APP_SPIM0_SCK_PIN 27 // SPI clock GPIO pin number. #define SER_APP_SPIM0_MOSI_PIN 2 // SPI Master Out Slave In GPIO pin number #define SER_APP_SPIM0_MISO_PIN 26 // SPI Master In Slave Out GPIO pin number #define SER_APP_SPIM0_SS_PIN 23 // SPI Slave Select GPIO pin number #define SER_APP_SPIM0_RDY_PIN 25 // SPI READY GPIO pin number #define SER_APP_SPIM0_REQ_PIN 24 // SPI REQUEST GPIO pin number // serialization CONNECTIVITY board #define SER_CON_RX_PIN 24 // UART RX pin number. #define SER_CON_TX_PIN 23 // UART TX pin number. #define SER_CON_CTS_PIN 25 // UART Clear To Send pin number. Not used if HWFC is set to false. #define SER_CON_RTS_PIN 2 // UART Request To Send pin number. Not used if HWFC is set to false. #define SER_CON_SPIS_SCK_PIN 27 // SPI SCK signal. #define SER_CON_SPIS_MOSI_PIN 2 // SPI MOSI signal. #define SER_CON_SPIS_MISO_PIN 26 // SPI MISO signal. #define SER_CON_SPIS_CSN_PIN 23 // SPI CSN signal. #define SER_CON_SPIS_RDY_PIN 25 // SPI READY GPIO pin number. #define SER_CON_SPIS_REQ_PIN 24 // SPI REQUEST GPIO pin number. #define SER_CONN_CHIP_RESET_PIN 11 // Pin used to reset connectivity chip // Arduino board mappings #define ARDUINO_SCL_PIN 27 // SCL signal pin #define ARDUINO_SDA_PIN 26 // SDA signal pin #define ARDUINO_AREF_PIN 2 // Aref pin #define ARDUINO_13_PIN 25 // Digital pin 13 #define ARDUINO_12_PIN 24 // Digital pin 12 #define ARDUINO_11_PIN 23 // Digital pin 11 #define ARDUINO_10_PIN 22 // Digital pin 10 #define ARDUINO_9_PIN 20 // Digital pin 9 #define ARDUINO_8_PIN 19 // Digital pin 8 #define ARDUINO_7_PIN 18 // Digital pin 7 #define ARDUINO_6_PIN 17 // Digital pin 6 #define ARDUINO_5_PIN 16 // Digital pin 5 #define ARDUINO_4_PIN 15 // Digital pin 4 #define ARDUINO_3_PIN 14 // Digital pin 3 #define ARDUINO_2_PIN 13 // Digital pin 2 #define ARDUINO_1_PIN 12 // Digital pin 1 #define ARDUINO_0_PIN 11 // Digital pin 0 #define ARDUINO_A0_PIN 3 // Analog channel 0 #define ARDUINO_A1_PIN 4 // Analog channel 1 #define ARDUINO_A2_PIN 28 // Analog channel 2 #define ARDUINO_A3_PIN 29 // Analog channel 3 #define ARDUINO_A4_PIN 30 // Analog channel 4 #define ARDUINO_A5_PIN 31 // Analog channel 5 #ifdef __cplusplus } #endif #endif // PCA10040_H