/** * Copyright (c) 2015 - 2018, Nordic Semiconductor ASA * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ #ifndef PEER_ID_MANAGER_H__ #define PEER_ID_MANAGER_H__ #include #include "sdk_errors.h" #include "ble.h" #include "ble_gap.h" #include "peer_manager_types.h" #include "peer_manager_internal.h" #ifdef __cplusplus extern "C" { #endif /** * @cond NO_DOXYGEN * @defgroup id_manager ID Manager * @ingroup peer_manager * @{ * @brief An internal module of @ref peer_manager. A module for keeping track of peer identities * (IRK and peer address). */ /**@brief Function for dispatching SoftDevice events to the ID Manager module. * * @param[in] p_ble_evt The SoftDevice event. */ void im_ble_evt_handler(ble_evt_t const * p_ble_evt); /**@brief Function for getting the corresponding peer ID from a connection handle. * * @param[in] conn_handle The connection handle. * * @return The corresponding peer ID, or @ref PM_PEER_ID_INVALID if none could be resolved. */ pm_peer_id_t im_peer_id_get_by_conn_handle(uint16_t conn_handle); /**@brief Function for getting the corresponding peer ID from a master ID (EDIV and rand). * * @param[in] p_master_id The master ID. * * @return The corresponding peer ID, or @ref PM_PEER_ID_INVALID if none could be resolved. */ pm_peer_id_t im_peer_id_get_by_master_id(ble_gap_master_id_t const * p_master_id); /**@brief Function for getting the corresponding connection handle from a peer ID. * * @param[in] peer_id The peer ID. * * @return The corresponding connection handle, or @ref BLE_CONN_HANDLE_INVALID if none could be * resolved. The conn_handle can refer to a recently disconnected connection. */ uint16_t im_conn_handle_get(pm_peer_id_t peer_id); /**@brief Function for comparing two master ids * @note Two invalid master IDs will not match. * * @param[in] p_master_id1 First master id for comparison * @param[in] p_master_id2 Second master id for comparison * * @return True if the input matches, false if it does not. */ bool im_master_ids_compare(ble_gap_master_id_t const * p_master_id1, ble_gap_master_id_t const * p_master_id2); /**@brief Function for getting the BLE address used by the peer when connecting. * * @param[in] conn_handle The connection handle. * @param[out] p_ble_addr The BLE address used by the peer when the connection specified by * conn_handle was established. Cannot be NULL. * * @retval NRF_SUCCESS The address was found and copied. * @retval BLE_ERROR_INVALID_CONN_HANDLE conn_handle does not refer to an active connection. */ ret_code_t im_ble_addr_get(uint16_t conn_handle, ble_gap_addr_t * p_ble_addr); /**@brief Function for checking if a master ID is valid or invalid * * @param[in] p_master_id The master ID. * * @retval true The master id is valid. * @retval false The master id is invalid (i.e. all zeros). */ bool im_master_id_is_valid(ble_gap_master_id_t const * p_master_id); /**@brief Function for checking if two pieces of bonding data correspond to the same peer. * * @param[in] p_bonding_data1 The first piece of bonding data to check. * @param[in] p_bonding_data2 The second piece of bonding data to check. * * @retval true The bonding data correspond to the same peer. * @retval false The bonding data do not correspond to the same peer. */ bool im_is_duplicate_bonding_data(pm_peer_data_bonding_t const * p_bonding_data1, pm_peer_data_bonding_t const * p_bonding_data2); /**@brief Function for finding if we are already bonded to a peer. * * @param[in] p_bonding_data The bonding data to check. * @param[in] peer_id_skip Optional peer to ignore when searching for duplicates. * * @return An existing peer ID for the peer, or PM_PEER_ID_INVALID if none was found. */ pm_peer_id_t im_find_duplicate_bonding_data(pm_peer_data_bonding_t const * p_bonding_data, pm_peer_id_t peer_id_skip); /**@brief Function for reporting that a new peer ID has been allocated for a specified connection. * * @param[in] conn_handle The connection. * @param[in] peer_id The new peer ID. */ void im_new_peer_id(uint16_t conn_handle, pm_peer_id_t peer_id); /**@brief Function for deleting all of a peer's data from flash and disassociating it from any * connection handles it is associated with. * * @param[in] peer_id The peer to free. * * @return Any error code returned by @ref pdb_peer_free. */ ret_code_t im_peer_free(pm_peer_id_t peer_id); /**@brief Function to set the local Bluetooth identity address. * * @details The local Bluetooth identity address is the address that identifies this device to other * peers. The address type must be either @ref BLE_GAP_ADDR_TYPE_PUBLIC or @ref * BLE_GAP_ADDR_TYPE_RANDOM_STATIC. The identity address cannot be changed while roles are * running. * * @note This address will be distributed to the peer during bonding. * If the address changes, the address stored in the peer device will not be valid and the * ability to reconnect using the old address will be lost. * * @note By default the SoftDevice will set an address of type @ref BLE_GAP_ADDR_TYPE_RANDOM_STATIC * upon being enabled. The address is a random number populated during the IC manufacturing * process and remains unchanged for the lifetime of each IC. * * @param[in] p_addr Pointer to address structure. * * @retval NRF_SUCCESS Address successfully set. * @retval BLE_ERROR_GAP_INVALID_BLE_ADDR If the GAP address is invalid. * @retval NRF_ERROR_BUSY Could not process at this time. Process SoftDevice events * and retry. * @retval NRF_ERROR_INVALID_STATE The identity address cannot be changed while advertising, * scanning, or while in a connection. * @retval NRF_ERROR_INTERNAL If an internal error occurred. */ ret_code_t im_id_addr_set(ble_gap_addr_t const * p_addr); /**@brief Function to get the local Bluetooth identity address. * * @note This will always return the identity address irrespective of the privacy settings, * i.e. the address type will always be either @ref BLE_GAP_ADDR_TYPE_PUBLIC or @ref * BLE_GAP_ADDR_TYPE_RANDOM_STATIC. * * @param[out] p_addr Pointer to address structure to be filled in. * * @retval NRF_SUCCESS If the address was successfully retrieved. */ ret_code_t im_id_addr_get(ble_gap_addr_t * p_addr); /**@brief Function to set privacy settings. * * @details Privacy settings cannot be set while advertising, scanning, or while in a connection. * * @param[in] p_privacy_params Privacy settings. * * @retval NRF_SUCCESS If privacy options were set successfully. * @retval NRF_ERROR_NULL If @p p_privacy_params is NULL. * @retval NRF_ERROR_INVALID_PARAM If the address type is not valid. * @retval NRF_ERROR_BUSY If the request could not be processed at this time. * Process SoftDevice events and retry. * @retval NRF_ERROR_INVALID_STATE Privacy settings cannot be changed while BLE roles using * privacy are enabled. */ ret_code_t im_privacy_set(pm_privacy_params_t const * p_privacy_params); /**@brief Function to retrieve the current privacy settings. * * @details The privacy settings returned include the current device irk as well. * * @param[in] p_privacy_params Privacy settings. * * @retval NRF_SUCCESS Successfully retrieved privacy settings. * @retval NRF_ERROR_NULL @c p_privacy_params is NULL. * @retval NRF_ERROR_INTERNAL If an internal error occurred. */ ret_code_t im_privacy_get(pm_privacy_params_t * p_privacy_params); /**@brief Function for resolving a resolvable address with an identity resolution key (IRK). * * @details This function will use the ECB peripheral to resolve a resolvable address. * This can be used to resolve the identity of a device distributing a random * resolvable address based on any IRKs you have received earlier. If an address is * resolved by an IRK, the device distributing the address must also know the IRK. * * @param[in] p_addr A random resolvable address. * @param[in] p_irk An identity resolution key (IRK). * * @retval true The irk used matched the one used to create the address. * @retval false The irk used did not match the one used to create the address, or an argument was * NULL. */ bool im_address_resolve(ble_gap_addr_t const * p_addr, ble_gap_irk_t const * p_irk); /**@brief Function for setting / clearing the whitelist. * * @param p_peers The peers to whitelist. Pass NULL to clear the whitelist. * @param peer_cnt The number of peers to whitelist. Pass zero to clear the whitelist. * * @retval NRF_SUCCESS If the whitelist was successfully set or cleared. * @retval BLE_GAP_ERROR_WHITELIST_IN_USE If a whitelist is in use. * @retval BLE_ERROR_GAP_INVALID_BLE_ADDR If any peer has an address which can not be used * for whitelisting. * @retval NRF_ERROR_NOT_FOUND If any peer or its data could not be found. * @retval NRF_ERROR_DATA_SIZE If @p peer_cnt is greater than * @ref BLE_GAP_WHITELIST_ADDR_MAX_COUNT. */ ret_code_t im_whitelist_set(pm_peer_id_t const * p_peers, uint32_t const peer_cnt); /**@brief Retrieves the current whitelist, set by a previous call to @ref im_whitelist_set. * * @param[out] A buffer where to copy the GAP addresses. * @param[inout] In: the size of the @p p_addrs buffer. * Out: the number of address copied into the buffer. * @param[out] A buffer where to copy the IRKs. * @param[inout] In: the size of the @p p_irks buffer. * Out: the number of IRKs copied into the buffer. * * @retval NRF_SUCCESS If the whitelist was successfully retrieved. * @retval BLE_ERROR_GAP_INVALID_BLE_ADDR If any peer has an address which can not be used for * whitelisting. * @retval NRF_ERROR_NOT_FOUND If the data for any of the cached whitelisted peers * can not be found anymore. It might have been deleted in * the meanwhile. * @retval NRF_ERROR_NO_MEM If the provided buffers are too small. */ ret_code_t im_whitelist_get(ble_gap_addr_t * p_addrs, uint32_t * p_addr_cnt, ble_gap_irk_t * p_irks, uint32_t * p_irk_cnt); /**@brief Set the device identities list. */ ret_code_t im_device_identities_list_set(pm_peer_id_t const * p_peers, uint32_t peer_cnt); /** @} * @endcond */ #ifdef __cplusplus } #endif #endif /* PEER_ID_MANAGER_H__ */